Best Haterade corner in a long while! You had me laughing a few times there. BTW, thanks. You just saved me from a mistake. I had just about decided to order some of that ChinaTurf. I'll just wait a bit longer and order the good stuff. Keep on Sendin'
Just recently stumbled across your channel, AWESOME info and videos!!! I used to fish from a canoe for most of my life. Now that I'm 63 with a blown out back I finally upgraded a bit. I don't own a Jon boat but picked up a 1978 Glastron Skiflite 16' Tri-Hull with trailer and 50hp Mercury really cheap. I'm rebuilding it, separated the 2 hull half's (top & bottom). When I get done replacing the transom, stringers and floor deck I was wondering what to use for the flooring cover. Thanks for saving my arse from buying the cheap crap. Oh yeah... I'm converting the boat from a bow rider to a fishing boat.
just my personal experience with the amazon stuff it worked on my tiny Jon boat BUT it did shrink so where its jointed together there is a fat ugly gap now, but I haven't had any of it peel up, again just my personal experience with the one and only roll I ordered, that being said I wouldn't want to stick the cheap stuff on any decent rig, go with the quality for sure.
Thank you. Starting my 16ft Grizzly Project. Got the manual rivet gun, sander, 14gauge wire. Saving for the hydro decking. Looking forward to sending it.
Nice Shirt....Bacon Helps. If I had not already applied color matched bed liner to my top deck....that Hydro deck looks sweet! 🤔. The only thing I see is those cold days of spring Steelhead fishing...freezing water in and on it. 🤔 In the Sunbelt it's.... perfect! -17°F with 25mph breeze up here, every thing is froze solid.....we are playing go fish with cards.... inside! 😂😂😂 Even pointing out your mistakes.....I think it still looks great. SEND IT!
Hey dude I wanted to say I really appreciate your channel, really helps us guys who are just getting started. I just picked up some Hydroturf from Facebook marketplace for pretty cheap, hope it does good for me. Also Roll Tide baby😬
FYI, your boat will sit about 1 inch lower in the water for every 333 lbs you place in it, of course, assuming the weight is distributed so that it remains level. Also, you stiffened it with your modifications. Sorry Scooter.
Particularly enjoy your Scooter "expose' " segments! Not only do you sport a high velocity 1st serve but I enjoy your incredible "top spin" capabilities on your return. These scooters should, but definitely aren't capable of, realize the need to climb down from their self-assigned, elevated judge's chair! Your creativity and in-depth explanations are stalwart compared to most YT 'rs. Keep up the good work... maybe save your energies for your beverage "Power Jerk"! Although I do enjoy a competent Slam-down artist like you, let the attention-starved "Jerks" stay hungry! Lol x 2!
I appreciate your opinions and honesty regarding your victories and failures on the endeavors most of us want to try but want someone like you to try first. I just got my first Send It tee shirt from The Jon Yacht, still looking for the sticker/decal for my jon boat. I'd rather give you money than "lift" your graphic.
Looks damn good dude! But man I'm way too hard on my boat I would tear that stuff up! The chainsaw lives in my boat and when we need to cut logjams out we nose up to it and a lot of times there are good-sized chunks of firewood just falling on the front deck.
I use the Amazon turf on the back of my speed boat and it’s held up really well although it isn’t very squishy but if you sand the area and prep it then it’ll last
I’d love to put this stuff on the front and rear decks of my 2072 Jon boat. In your opinion, how well does it defend against heat. During the summer, the decks get so hot that I can’t even wear dock shoes, much less bare footed🥵🥵🥵🥵🥵🥵🥵. I’d love to be able to stand bare-footed on my deck, and also not partially cook any big catfish that come up on deck. Love the content my friend!!! Bon peche, and Geaux Tigers!!!!!!!🤘
I actually have the Amazon stuff on my jon boat deck and it has held up pretty well given the quality. I painted the deck and lightly scuffed it before sticking it down and that seemed to help with adhesion. Surprisingly, the foam itself cleans off pretty well with dish liquid and a bristle brush. I will say though that it could be thicker stuff and have a bit better adhesive(clearly from your video) . My feet after standing barefoot for a couple hours need a break. With shoes or sandals no problem standing for however long. If I come to redoing the deck in the future, I would definitely splurge this time around on better quality foam but I think the Amazon stuff is a good option for those on a budget.
First I have heard with good luck on that Amazon foam. The stuff I got would not stay stuck at all. It sucked. Glad your experience was better than mine.
Where do you get your parts for your predator 670cc? I'm desperately looking for a new muffler and can't locate one. Help in that would be appreciated.
The biggest problem with the more premium brands in Australia at least is that routable two tone for diy installation is non existent. It's a solid colour or custom cnc installation or nothing. And I will tell you right now the Seadeck ect. Installers can jam $3k plus for.a 14.5 foot boat fair up their unmentionable regions. So that leaves ebay unfortunately.. I like your channel though, nice work.
lol Jesus some of these comments are so fukkin funny. Idiots lemme watch smote love your vids keep at it brah. Rebuilding a 1648 and screw that cheep aszzz Amazon chit you get what chat pay for
Hater corner is hilarious 🤣 Thanks for the tip on the local source for good foam. I’m down in Jackson GA, I’ll be up soon to pick up a sheet🤘🏼 I think ima just do the bow area, where I stand to fish. I have a 1648g3, My deck is sprayed with Raptor Liner. I guess I’ll want to sand it flat first. Whatcha think?
Yeah I was the same way... and hell the reviews made it sound like it was the next best thing since twinkies and slimjims! Then I got it and actually used it and wanted to warn folks not to waste their money.
How easy is this stuff to clean? Me and 3 dogs get out and in the boat several times each trip leaving mud prints all over the deck. Would it hold up to a car/pressure washer, or would it take elbow grease?
It is really easy to clean. I use a long handled truck washing brush and Dawn soap to scrub it down then just spray it off with a water hose. They don't recommend a pressure washer, but maybe one of those low pressure electric ones would be okay like the Harbor Freight ones I wash my truck with.
I love your videos man! I own a 19' off shore center console from the 80's that I've rebuilt from the ground up since I was 16. I fucking hate it and it is continuously rotting or breaking elsewhere. I want to get a jon boat and customize it to my liking and these videos are ridiculously helpful. Thanks again!
That amazon stuff really pissed me off. I tried everything I could to make it work and it would not stay stuck for nothing. Waste of money. I bought 3 boxes of that garbage for nothing.
Love the boat build! Have you thought about putting an electric winch on it? I think I’ll end up doing that so I can drag it over logs when the waters low in the woodie holes
I was looking to get some sheets but I couln't find where its listed in their site. They could also have an "other" option in their choose your boat menu
How is that turf holding up to the fin on the mud motor? I have done some damage to my flooring while trailering and would hate to spend the money to trash it on the way to the ramp.
I know right... I was so pissed. Not once but twice it rained on me while I was trying to film. Not even within 3 hours of when they said it was going to rain.
No such thing as right around the corner from your location to Acworth with our traffic. :-) It's more like .......... on the other side of the state! as far as I'm concerned. (not sure if you can tell but I'm over the traffic)
Hydrodeck, according to their website does not sell this stuff in sheets. It's all deck kits for specific boats. I'd like to buy it but they aren't making it very easy.
how well does the hydro turf clean up? possibly looking at putting it on the deck of a bow fishing boat but with all of the fish slime and guts makes me wonder how well it'll clean up.
I’m not sure the price difference but if you have an area that will require multiple cuts around hatches ect you might be better off doing a template and letting the manufacturer cut it. When I did my boat with sea deck the process was to make templates then the vendor printed them in cad and sent it back on clear plastic sheets so I could verify and or mark up with a sharpie for any final changes before they cut them out.
I missed turf day... I was on a boat. I would say I was fishing but I never saw any fish... so I was just riding around on a boat playing with my pole lol.
Hello, I love your content. My question is about this eva foam install. I see you used some type of angle to hide the transition from the vertical to the horizontal butt. What is that material? Plastic? Painted aluminium? I need to do the exact same thing on my boat and I need to hide that joint. Thank you and keep up the awesome content. I hope your venture with the tiny boat crew is working. I love the videos of all you guys together. My favorite was the Tennessee build. We already booked a stay there.
oh wait, thats the cove base you used around the port and starboard sides. I was talking about this. maybe you used the same vinyl. Here: please check it out. drive.google.com/file/d/1GqGRShyRLvdAiOubNf2cMlzeytq2zIk2/view?usp=sharing
Hey Nimrod, Scooter here. Nice video. I appreciate the effort and information. I'll check them out. How did it work over deck rivets or is that a no go?
I see at about 8:53 that it looks like you may have left a small piece of backing paper. It could just be a visual artifact on camera, but it looks like it might not have been visible from the angle you were viewing at that moment.
Hydro Deck does not have camouflage flooring. They really need to start making camouflage flooring. Thats why I'm sticking with Sea Dek if I ever put foam flooring in my john boat. I plan on using it for duck hunting. If they did id totally be down to try it but they dont.
Get the flooring from Prodigy Boats. I've seen 2 duck boats that get used regularly, and their stuff holds up well, especially of you're looking for camo.
@@christophermccrary8080 Thanks but I think I’ll stick with SeaDek if I ever decide to put flooring in my hunting boat. We have it in our fishing boat and It has lasted 14 years. Other than minor fading it’s still like brand new. That’s to be expected. We fish year round so our boat stays outside.
Turf ain't known for torture. It can withstand doily walking and stuff like that, but it would be a short torture test. Carpet if you are one of those boat people that destroys everything.
@@SendItJonBoats Curiosity mostly. Saw a boat at a ramp that had foam. Looked like someone had stepped on a few lures and weights and left permanent dents. I would have hoped it was stronger then that. One small rock stuck to the groove of your boot sole would make a lot of dents. Thanks for getting back to me. Keep bashing those trolls. LOL
Just bought an old pos flat bottom and was very overwhelmed with how I wanted to set it up and repair it. Your videos took a lot of the questions away. Thank you!
Dude I literally had two rolls of that shit in my cart and was fixing to order you saved my ass this time
Yeah man, that amazon stuff is junk, don't waste your money.
Best Haterade corner in a long while! You had me laughing a few times there.
BTW, thanks. You just saved me from a mistake. I had just about decided to order some of that ChinaTurf. I'll just wait a bit longer and order the good stuff.
Keep on Sendin'
Glad I could help. Save them pennies and get the better turf, it is well worth it.
Yeppir...always remember that China is VERY fragile with a high likelihood of BREAKAGE!lol
Just recently stumbled across your channel, AWESOME info and videos!!!
I used to fish from a canoe for most of my life. Now that I'm 63 with a blown out back I finally upgraded a bit. I don't own a Jon boat but picked up a 1978 Glastron Skiflite 16' Tri-Hull with trailer and 50hp Mercury really cheap. I'm rebuilding it, separated the 2 hull half's (top & bottom). When I get done replacing the transom, stringers and floor deck I was wondering what to use for the flooring cover. Thanks for saving my arse from buying the cheap crap.
Oh yeah... I'm converting the boat from a bow rider to a fishing boat.
I made that huge mistake and bought the cheap turf... I regret it and will never do it again.
just my personal experience with the amazon stuff it worked on my tiny Jon boat BUT it did shrink so where its jointed together there is a fat ugly gap now, but I haven't had any of it peel up, again just my personal experience with the one and only roll I ordered, that being said I wouldn't want to stick the cheap stuff on any decent rig, go with the quality for sure.
glad you had good luck with it, that sucks it shrunk up on you.
Fuck the scooters love how you rip em a new one. Keep it up love your vids
Ha HA thanks bud!
Hello from Alaska, comment reveiw best one yet "just saying" lmfao 🤣 keep the hater aid full brother
Btw as a tiny boat owner that dispizes amazonot I love the poor products that don't work reveiws
Thanks bro! Glad you enjoyed.
Thank you. Starting my 16ft Grizzly Project. Got the manual rivet gun, sander, 14gauge wire. Saving for the hydro decking. Looking forward to sending it.
Nice! Sounds like you got a fun project ahead of you!
I'm new to your channel. This content is GOLD. Love the humor and the "Scooter" segments at the end 😂
Thank you, glad you enjoyed the video.
love the effort you put into your vids!! keep up the great work!!
Thanks Connor. Appreciate you watching.
Nice Shirt....Bacon Helps.
If I had not already applied color matched bed liner to my top deck....that Hydro deck looks sweet!
🤔. The only thing I see is those cold days of spring Steelhead fishing...freezing water in and on it. 🤔
In the Sunbelt it's.... perfect!
-17°F with 25mph breeze up here, every thing is froze solid.....we are playing go fish with cards.... inside!
😂😂😂
Even pointing out your mistakes.....I think it still looks great.
SEND IT!
whoooooooo yeah keep that -17 temp stuff up there! We don't want it.
Hey dude I wanted to say I really appreciate your channel, really helps us guys who are just getting started. I just picked up some Hydroturf from Facebook marketplace for pretty cheap, hope it does good for me. Also Roll Tide baby😬
You will like that Hydroturf it is good stuff. Geaux Tigers!
FYI, your boat will sit about 1 inch lower in the water for every 333 lbs you place in it, of course, assuming the weight is distributed so that it remains level. Also, you stiffened it with your modifications. Sorry Scooter.
Good to know thanks
Nice job with those vinyl strips. They look really good but they also prevent water from coming in.
Thanks! Glad you enjoyed the video
Glad to see you back on, thanks for the heads up on the cheap turf!
Been busy, many things going on with work and boat stuff. Going to try and get some videos out for ya'll over the next few weeks.
Any of that stick on stuff will be trash after some years of sun. Then you have to try and get the glue off to re do it. Good luck with that.
Thanks
Particularly enjoy your Scooter "expose' " segments! Not only do you sport a high velocity 1st serve but I enjoy your incredible "top spin" capabilities on your return. These scooters should, but definitely aren't capable of, realize the need to climb down from their self-assigned, elevated judge's chair! Your creativity and in-depth explanations are stalwart compared to most YT 'rs. Keep up the good work... maybe save your energies for your beverage "Power Jerk"! Although I do enjoy a competent Slam-down artist like you, let the attention-starved "Jerks" stay hungry! Lol x 2!
I just find it funny and I like to give the haters something to run their flappers about. Thanks for watching, many more to come.
I appreciate your opinions and honesty regarding your victories and failures on the endeavors most of us want to try but want someone like you to try first. I just got my first Send It tee shirt from The Jon Yacht, still looking for the sticker/decal for my jon boat. I'd rather give you money than "lift" your graphic.
Some body has to be the test dummy... might as well be me.
We are working on the stickers, but you are more than welcome to use my logo if you want.
did you just get a quote for the rolls? I wonder because each site ask for boat model not just stocked rolls.
I had to call them to get pricing on just the rolls. I switched to Hydroturf and Seadeck on all my new builds now. You can get them at tbnation.net
I have diamond plate on the bottom of jon boat for floor… do you think hydrodek will adhere to it? Thanks
It will but you will need to put some contact cement down first.
Also what 3 colors of how paint did you use I didn’t know what Beige
OHw paint, I did a video on it and talked about the colors. It is a custom mix.
all these man jokes and you straighten your beard......
Whats wrong with having a straight beard? Your mom likes it.
Acworth!? I live in Canton, let's fish some time brother!
Heck yeah. I am actually in Covington but soon as the weather warms up I will be ready to fish.
Does this stuff work on non flat surfaces such as diamond plated aluminum?
Yes it does.
Looks damn good dude! But man I'm way too hard on my boat I would tear that stuff up! The chainsaw lives in my boat and when we need to cut logjams out we nose up to it and a lot of times there are good-sized chunks of firewood just falling on the front deck.
I use the Amazon turf on the back of my speed boat and it’s held up really well although it isn’t very squishy but if you sand the area and prep it then it’ll last
I’d love to put this stuff on the front and rear decks of my 2072 Jon boat. In your opinion, how well does it defend against heat. During the summer, the decks get so hot that I can’t even wear dock shoes, much less bare footed🥵🥵🥵🥵🥵🥵🥵. I’d love to be able to stand bare-footed on my deck, and also not partially cook any big catfish that come up on deck. Love the content my friend!!! Bon peche, and Geaux Tigers!!!!!!!🤘
Turf is awesome. Stays cool all day and I walk barefoot on it all the time. Love it.
Geaux tigers!
I actually have the Amazon stuff on my jon boat deck and it has held up pretty well given the quality. I painted the deck and lightly scuffed it before sticking it down and that seemed to help with adhesion. Surprisingly, the foam itself cleans off pretty well with dish liquid and a bristle brush. I will say though that it could be thicker stuff and have a bit better adhesive(clearly from your video) . My feet after standing barefoot for a couple hours need a break. With shoes or sandals no problem standing for however long. If I come to redoing the deck in the future, I would definitely splurge this time around on better quality foam but I think the Amazon stuff is a good option for those on a budget.
First I have heard with good luck on that Amazon foam. The stuff I got would not stay stuck at all. It sucked. Glad your experience was better than mine.
Subscribing in Acworth, Ga.
Awesome. thanks for the sub
Good job. Do you use a flat iron on your beard? LOL....
I actually use a straightener not a flat iron.
You ever ran up Clark creek here in acworth up under 92
Never been up there. I stay south when I can.
Where do you get your parts for your predator 670cc? I'm desperately looking for a new muffler and can't locate one. Help in that would be appreciated.
Message Jeff Clines on Facebook, he built mine and I love it. For all other parts I order from performance670.com
Thanks
I will not be attempting this . Lol
LOL. It aint too bad now that you have all the info on how to do it without failing like me!
How much hydrodeck paying ya
Not a dime... had to buy all that out of my own pocket. You should call them and tell them to pay me LOL
I wonder if bacon helps scooters scoot lmao
Bacon always helps
How can I buy a sheet they only are selling kits
Contact us at TBnation.net or you can buy a whole sheet at our shops in Illinois or Georgia.
Hey. What color is the main color of the boat
dark beige
yeaaaaaaaah buddy
Yee Yee!!!
Man your content is amazing, and some great information and reviews. The beard and weird send it clips though are very cringy
Cringy is game... Winning!
Glad you enjoyed the video.
@@SendItJonBoats Haha, I guess the more i watch the more i realize you are the equivalent to Jon boats as Cleetus Mcfarland is to dragracing.
@@muthagoose00 I want to get into jon boat drag racing and race with Cletus someday. I think we could make great videos together
The biggest problem with the more premium brands in Australia at least is that routable two tone for diy installation is non existent. It's a solid colour or custom cnc installation or nothing. And I will tell you right now the Seadeck ect. Installers can jam $3k plus for.a 14.5 foot boat fair up their unmentionable regions. So that leaves ebay unfortunately.. I like your channel though, nice work.
lol Jesus some of these comments are so fukkin funny. Idiots lemme watch smote love your vids keep at it brah. Rebuilding a 1648 and screw that cheep aszzz Amazon chit you get what chat pay for
Hater corner is hilarious 🤣
Thanks for the tip on the local source for good foam. I’m down in Jackson GA, I’ll be up soon to pick up a sheet🤘🏼 I think ima just do the bow area, where I stand to fish. I have a 1648g3, My deck is sprayed with Raptor Liner. I guess I’ll want to sand it flat first. Whatcha think?
I would definitely sand it first. but it should stick fine.
hey great vid fixing up a POS glassport bass scalper and i would of been none the wiser about the the poor quality amazon knock off.
Yeah I was the same way... and hell the reviews made it sound like it was the next best thing since twinkies and slimjims! Then I got it and actually used it and wanted to warn folks not to waste their money.
How easy is this stuff to clean? Me and 3 dogs get out and in the boat several times each trip leaving mud prints all over the deck. Would it hold up to a car/pressure washer, or would it take elbow grease?
It is really easy to clean. I use a long handled truck washing brush and Dawn soap to scrub it down then just spray it off with a water hose. They don't recommend a pressure washer, but maybe one of those low pressure electric ones would be okay like the Harbor Freight ones I wash my truck with.
I love your videos man! I own a 19' off shore center console from the 80's that I've rebuilt from the ground up since I was 16. I fucking hate it and it is continuously rotting or breaking elsewhere. I want to get a jon boat and customize it to my liking and these videos are ridiculously helpful. Thanks again!
Awesome, glad i could help.
Man u just saved me a lot of money. Had 4 rolls of the Amazon kind in my cart. Will be getting hydrodeck instead. Awesome video.
That amazon stuff really pissed me off. I tried everything I could to make it work and it would not stay stuck for nothing. Waste of money. I bought 3 boxes of that garbage for nothing.
Love the boat build! Have you thought about putting an electric winch on it? I think I’ll end up doing that so I can drag it over logs when the waters low in the woodie holes
I wish I would have done a winch on this boat, but I di not think about it when building it. I will for sure do that on my next one.
I was looking to get some sheets but I couln't find where its listed in their site. They could also have an "other" option in their choose your boat menu
Yeah their website is not that great. Try tbnation.net they got all the turf you could ever want.
Me and my dad work together and install hydro deck by templates on boats, it’s kinda weird to see a video about them on my fyp
Nice, it is fun stuff once you get the hang of it. I was shocked how sticky it was.
Rock on ! Thanks let's go Brandon
Yee Yee FJB LGB!!!!!
Trimming it out actually looks more professional. Great job.. Trimming it out actually looks more professional. Great job..
Thanks, glad you liked it
Hey buddy I need some contact info, I have an unused surface drive sitting on a stand that needs to go on something. FYI???
Email me chris@atfhydrographics.com
Love the videos… The scooter comments literally kill me…Lol 😢😂😂 😂
LOL, glad you are liking it. Thanks for watching.
Damn Karen please tell us the secrets of dodging the scale I don't believe scooter even fishes
LMAO!!!!
Excellent. Thank you. To hell with Scooter, your beard looks real enough.😄
LMAO... gotta show the haters some love!
Well done! If you want to fish for trout or smallmouth, let me know. Montana rocks!
How is that turf holding up to the fin on the mud motor? I have done some damage to my flooring while trailering and would hate to spend the money to trash it on the way to the ramp.
I take a scrap of that vinyl and stick it under the fins so it wont jack up my turf.
Fuckin weatherman
I know right... I was so pissed. Not once but twice it rained on me while I was trying to film. Not even within 3 hours of when they said it was going to rain.
very good to know. I hate wasting my money on cheap knockoffs that fail.
You're killin me smalls.... I don't have money for float pods,gator glide,hydro deck, I just wanna send it !!!
I dont have any money now either, because I sent it! LOL
@@SendItJonBoats bro you send the shit out it ! Lol
No such thing as right around the corner from your location to Acworth with our traffic. :-)
It's more like .......... on the other side of the state! as far as I'm concerned. (not sure if you can tell but I'm over the traffic)
The traffic in this whole state sucks balls. Everywhere I go it is freakin traffic.
@@SendItJonBoatsbig, giant hairy ones. Boxloads and boxloads of people and they all drive 2 cars.... at the same time
I'll probably never own a Jon Boat but, I love watching your vids.
You should get a boat... it's like the best money pit ever! Boat's N Hoes!
@@SendItJonBoats I'm in New Zealand, so Jet Boats are the thing.
The ol' ball and chain, might be too happy about dem Hoes tho. LoL
Wouldn't the foam act as floatation. If I sticks that good might keep er floating on a ruff day
Maybe, I dunno.
I ABSOLUTELY AND POSITIVELY LOVE YOU LOL. I AM A 71 YEAR OLD FEMALE. IF YOU NEED ME TO HELP YOU DEAL WITH FOOLS LET ME KNOW. LOL
Is there a video on how you did the transom on this boat? Ive got a 1648 lowe im about to do the transom
Yes I did 2 videos on it. They are on the channel
Dam Scooter that vinyl trim hack looks clean af. Is that hydro deck slippery when it's wet? Thinking about it for my boat.
Thanks, no it is actually pretty gripy when wet and it is cool on your feet.
@@SendItJonBoats awesome thanks for reply. I'll be getting some.
Hydrodeck, according to their website does not sell this stuff in sheets. It's all deck kits for specific boats.
I'd like to buy it but they aren't making it very easy.
Call them and they can help you out. Or you can order sheets from tbnation.net
@@SendItJonBoats Ok thanks.
This whole build is one of the dopest I've ever seen if you are ever in nebraska hit up the elkhorn or the platte river
Thanks Cody. Doubt I will ever make it to Nebraska... ya'll got too much snow for me, us southern boys don't handle to cold too well.
Zima? kind of dating yourself. love the vid's
I didn't think of that... yeah the Zima comment gave it away LOL
Was wonderin y ur boat was wet when trimmin outside...thought u cleaned her off for the cam...till i watched the end😂😂😂😂....RAIN!!!NICE VID...
Get u a heat gun and warm it up u can move it around but ur rolling pen is a very good idea
Did not even think about a heat gun! Great idea.
Good information, Thanks
Thanks for checking out the video.
Nice video, do you know if Hydro Deck will ship to Canada?
I am not sure, give them a call and ask. They are really nice people.
Hehehe U.S.C.G HP and Weight standards more like guidelines rather than actual rules 🤪. Send it!!!!
I just look at the Coast Guard and say "Lads, this is the day you will always remember, as the day you almost caught Capt. Jack Sparrow!"
@@SendItJonBoats 🤣
Like your boat build, not so muck your indoor wall art! Go bulldogs😀
Geaux Tigers.
Give Scooter directions to the closest Sonic! Geaux Tigers!
LMAO ! Geaux Tigers!
We're you planning on butting live well and or bait tank
can you please do more Scooter comments? piss my pants every time
10-fur... I will do some moe.
after two years how is it holding up?
how well does the hydro turf clean up? possibly looking at putting it on the deck of a bow fishing boat but with all of the fish slime and guts makes me wonder how well it'll clean up.
Dawn, water, and a soft brush cleans it up pretty good. When the weather gets better and I take it out bow fishing I will do an update video.
@@SendItJonBoats sweet thanks man. I’ll keep an eye out for it.
I’m not sure the price difference but if you have an area that will require multiple cuts around hatches ect you might be better off doing a template and letting the manufacturer cut it. When I did my boat with sea deck the process was to make templates then the vendor printed them in cad and sent it back on clear plastic sheets so I could verify and or mark up with a sharpie for any final changes before they cut them out.
Didn’t Nate give you all of his “turf secrets” in Tennessee? 🤷♂️
I missed turf day... I was on a boat. I would say I was fishing but I never saw any fish... so I was just riding around on a boat playing with my pole lol.
@@SendItJonBoats there is nothing wrong with playing with your pole 🤷♂️😂😜
Hello, I love your content. My question is about this eva foam install. I see you used some type of angle to hide the transition from the vertical to the horizontal butt. What is that material? Plastic? Painted aluminium? I need to do the exact same thing on my boat and I need to hide that joint. Thank you and keep up the awesome content. I hope your venture with the tiny boat crew is working. I love the videos of all you guys together. My favorite was the Tennessee build. We already booked a stay there.
Vinyl... I talked about it all at the end of the video for like 5 minutes and showed how to do it.
@@SendItJonBoats omg.. how did i miss that.. i went with aluminum and im not liking it...
oh wait, thats the cove base you used around the port and starboard sides. I was talking about this. maybe you used the same vinyl. Here: please check it out. drive.google.com/file/d/1GqGRShyRLvdAiOubNf2cMlzeytq2zIk2/view?usp=sharing
All you need now on cat walk is monster rod holders
Hey Nimrod, Scooter here. Nice video. I appreciate the effort and information. I'll check them out. How did it work over deck rivets or is that a no go?
I see at about 8:53 that it looks like you may have left a small piece of backing paper. It could just be a visual artifact on camera, but it looks like it might not have been visible from the angle you were viewing at that moment.
yup. worked fine over rivets. I sanded the counter sink rivets down flush so you cant even feel them under the turf.
That is very possible... stuff happens, it aint coming back up now too late lol
Scooter scooter scooter mom's basement must be getting boring
LMAO... Mom needs to bring more Cheetos and RC Cola down to the basement so scooter can stay hydrated and nourished while being a keyboard warrior.
Legend has it that Send It hasn’t shaved since he was born…..and he still has to glue on a fake beard
The beard jealousy never gets old! Love you guys!
Im scrolling through the tube looking for ideas for my tiny boat upgrade and all I keep seeing is beard comments before opening the comments 🤣
Man this video was right on time! Now I only have to choose between Sea Dek or Hydrodeck
Should paint the side walls on the interior black as well
I already had then tan so I just left it.
I didn't hear how much these sheets cost?
Hydro Deck does not have camouflage flooring. They really need to start making camouflage flooring. Thats why I'm sticking with Sea Dek if I ever put foam flooring in my john boat. I plan on using it for duck hunting. If they did id totally be down to try it but they dont.
yeah they need some camo.
Get the flooring from Prodigy Boats. I've seen 2 duck boats that get used regularly, and their stuff holds up well, especially of you're looking for camo.
@@christophermccrary8080 Thanks but I think I’ll stick with SeaDek if I ever decide to put flooring in my hunting boat. We have it in our fishing boat and It has lasted 14 years. Other than minor fading it’s still like brand new. That’s to be expected. We fish year round so our boat stays outside.
@@christophermccrary8080 They use seadeck and hydro turf. Good stuff. That is what we now sell on tbnation
Very well done , and a damn nice Boat, thanks. Oh send It
Thanks Ron, Appreciate you watching.
Looks nice! How is the noise level shutting compartments w this material as opposed to carpet?
Not too bad. I just try not to let them fall and close them on my own so they dont make a ton of noise.
Best commentary ever. "It's bonded, James Bonded"
I wondered if anyone was going to catch that... you are the first! Glad I could make you giggle.
Trimming it out actually looks more professional. Great job.
Thank you, i thought it was a nice touch on the cheap
Thanks for the great turf info. Should of beat the snot out of both pieces to see which was more durable. Ya, your boat looks really clean.
Turf ain't known for torture. It can withstand doily walking and stuff like that, but it would be a short torture test. Carpet if you are one of those boat people that destroys everything.
@@SendItJonBoats Curiosity mostly. Saw a boat at a ramp that had foam. Looked like someone had stepped on a few lures and weights and left permanent dents. I would have hoped it was stronger then that. One small rock stuck to the groove of your boot sole would make a lot of dents. Thanks for getting back to me. Keep bashing those trolls. LOL
Yup. My favorite channel about boats.
Thank you so much. Glad you are enjoying the videos.
Just bought an old pos flat bottom and was very overwhelmed with how I wanted to set it up and repair it. Your videos took a lot of the questions away. Thank you!
I can't stop laughing at the scooter thing, have fun and Well done....
Glad I could provide some comic relief. Thanks for checking out the video.
I'm 63 years young, have a few jon Boats, love the fun and humor, I'm the same way..keep on rocking it..
Thanks for the advice Man! Also, Quick question: What kind of welder do you use and what do you think about it?
I run a Titanium 200 Unlimited with spool gun for Aluminum. I really like it, but I am about to get back into tig welding.
@@SendItJonBoats I’m signing up for a TIG weld class. Close to retirement need stay busy.
Another great informative video for us real guys
Glad I could help. appreciate you watchin the video.