Which do you like best? I think the SCS 320 is one of the best for it. Our fitment guide is here --> freedomgorilla.com/blogs/news/11-best-springfield-echelon-holosun-optics-red-green-dot-sights-how-to-mount?yt
@@Seabee74 yes - no plate needed, that’s what allows the co-witness because the optic sits lower. The Echelon pin system is setup by default for an RMR optic footprint. Just remove the cover plate on the gun and use the shorter screws that come with the optic for install - leave the existing pins on the slide. The Holosun 507 Comp uses that footprint so no pin changeouts needed for other systems.
My red dot of choice has been the 507k on both P365s (x and xl) for some time now. These are my EDCs. However, when I obtained the Springfield Echelon as my Sunday go-to-meeting gun for church security, I was shown the Holosun 407C green and was amazed at the difference it made for my eyes. I've put about 600 rounds through it now and absolutely love it.
Man HS Produkt really set the bar with this optics boss system - other than maybe misplacing small parts this really looks like a perfect solution - direct mount of just about every optic has my attention
Great run down on ALL OF THEM , glad they makes the ACSS in 507k now , i like My 507C grn ACSS . ALSO EPS MRS grn sets very low on G-19 MOS you can still p/u stock irons , i think the new SCS ENCLOSED sets even lower . BEST SIGHTS ON THE MARKET ❤
I am wanting to put the 507c ACSS Vulcan on my new echelon. I’ve never used a red dot but like the idea of the outer circle to help teach me better mechanics. My question is will I need a plate or will it be a direct mount? Also I just wanted to thank you for the video!🤠
I'm no big fan of the horse shoe rear sight on the echelon! So I put a holosun red dot on it without the outer circle, I don't want it to cover up my target! I just wanted the dot that I can adjust to my liking.
I have an astigmatism. from what I have been reading the green is best. I am just trying to figure out which green dot I can place on my Springfield Armory Echelon.
I would definitely recommend trying a green dot. My favorite optic for the Echelon is the SCS 320. It’s a green dot, it’s an enclosed emitter, and it looks really nice with the echelon.
So what I’ve been told by my eye doctor, the bigger the window for the optic, usually the better it is, I got the 507 elite comp and the window does help a fair bit
Great Holosun family review! Thanks! I don't think I saw anything like that so far. Quick question - Echelon with SCS-320, what screws you would recommend? I use #6-32, 9.13mm, T10, but it fell of!..:) Maybe I installed it incorrectly? I also purchased Holosun SCS-320 short screws from TACRIG (haven't tried them yet - still waiting for delivery).
If you had one choice which would you pick (closed emitter). I just ordered the threaded barrel version for a heck of a price and wanting to do an optic as well.
which screws did you use for the SCS 320? the screws i got from holosun seemed way too short. I ordered the multiple screw kit from springfield armory's website and the screws they recommended to use were way too long (stuck halfway up into my optic window) I ended up using the RMR screws that came with the package from springfield they work but they also seem kind of short, they dont sit flush in the holes like my other optics
You use the SCS 320 screws. They will tighten up but you keep going. They aren’t too short. If anything they’re almost too long. Just keep tightening until they stop spinning. Just don’t gorilla it
When you click the link which optic is in the very first picture? Looks like the EPS but I want an optic to fill up the entire gap on the optic cut on the slide. Anyone?
Which do you like best? I think the SCS 320 is one of the best for it. Our fitment guide is here --> freedomgorilla.com/blogs/news/11-best-springfield-echelon-holosun-optics-red-green-dot-sights-how-to-mount?yt
One of the best videos breaking down each Holosun optic for the springfield echelon, which a firearm most YT'ers forgot about already...
Thank you!
Thank you!
Just put a Holosun 507 Comp GR on my Echelon. Perfect co-witness, very happy! It took 3 months to get it because of the long back order list though.
507 comp is great!
Did it direct fit without any plate? Thank You
@@Seabee74 yes you use pin set 1 which is on the pistol when you buy it
@@Seabee74 yes - no plate needed, that’s what allows the co-witness because the optic sits lower. The Echelon pin system is setup by default for an RMR optic footprint. Just remove the cover plate on the gun and use the shorter screws that come with the optic for install - leave the existing pins on the slide. The Holosun 507 Comp uses that footprint so no pin changeouts needed for other systems.
@lancelemay6971 Thank you, im torn between this and the SCS 320 holosun for my Elechon.
My red dot of choice has been the 507k on both P365s (x and xl) for some time now. These are my EDCs. However, when I obtained the Springfield Echelon as my Sunday go-to-meeting gun for church security, I was shown the Holosun 407C green and was amazed at the difference it made for my eyes. I've put about 600 rounds through it now and absolutely love it.
Great to know
Very informative video. Much appreciated.
Glad it was helpful!
Man HS Produkt really set the bar with this optics boss system - other than maybe misplacing small parts this really looks like a perfect solution - direct mount of just about every optic has my attention
Agreed the Echelon is really nice!
By far the best video I've watched all day, and I've watched a stupid amount of gun videos. Thanks, man.
Awesome! Glad it was helpful!
Great run down on ALL OF THEM , glad they makes the ACSS in 507k now , i like My 507C grn ACSS . ALSO EPS MRS grn sets very low on G-19 MOS you can still p/u stock irons , i think the new SCS ENCLOSED sets even lower . BEST SIGHTS ON THE MARKET ❤
Good info. But the background music made me pause it and change it... it was hammering my brain... other than that, great work.👍
I am wanting to put the 507c ACSS Vulcan on my new echelon. I’ve never used a red dot but like the idea of the outer circle to help teach me better mechanics. My question is will I need a plate or will it be a direct mount? Also I just wanted to thank you for the video!🤠
Well thank you. And it will be a direct fit! It’s a great optic
Good stuff just out the 407c on my echelon...
I wish the scs 320 came with red dot. My eyes don’t pick up green nearly as well as red. Maybe someday holosun will include red
insane knowledge! ty for that.
Of course. Thank you!
I'm no big fan of the horse shoe rear sight on the echelon! So I put a holosun red dot on it without the outer circle, I don't want it to cover up my target! I just wanted the dot that I can adjust to my liking.
Great video! Very informative Just sub’d. Keep going
You can actually run 30 different optics on the Echelon. I run the Trijicon SRO.
Holosun He507C-Gr-X2 Elite Green
I have an astigmatism. from what I have been reading the green is best. I am just trying to figure out which green dot I can place on my Springfield Armory Echelon.
I would definitely recommend trying a green dot. My favorite optic for the Echelon is the SCS 320. It’s a green dot, it’s an enclosed emitter, and it looks really nice with the echelon.
So what I’ve been told by my eye doctor, the bigger the window for the optic, usually the better it is, I got the 507 elite comp and the window does help a fair bit
Gold would be better. They cost a little more .
I'd love to see how much of the irons are visible with the regular 507 optics--specifically the 507 COMPETITION. :)
We have another video that shows it. You see about 1/4 of your iron sights
Can you provide a link to the video@@freedomgorilla1
I’ve heard the 407k needs new screws. Is that correct or does it come with everything that fits correctly?
Great Holosun family review! Thanks! I don't think I saw anything like that so far. Quick question - Echelon with SCS-320, what screws you would recommend? I use #6-32, 9.13mm, T10, but it fell of!..:) Maybe I installed it incorrectly? I also purchased Holosun SCS-320 short screws from TACRIG (haven't tried them yet - still waiting for delivery).
I just use the screws it came with. Just make sure they’re tightened down all the way
Nice video.. What weapon light is that?
Holosun PID, thanks for watching!
Thanks for the great video! Does the 407c come with everything I need to mount it onto a stock Echelon? Do I need any aftermarket parts/screws?
Yes it will fit directly. No need for anything else
@@freedomgorilla1what pin set is used for the 407C?
If you had one choice which would you pick (closed emitter). I just ordered the threaded barrel version for a heck of a price and wanting to do an optic as well.
The Scs 320. That’s the one i chose personally
Do any other SCS red dots fit on the Echelon? Like thePDP, vp9, or mp2? Is the SCS 320 the only one with the enclosed emitter?
which screws did you use for the SCS 320? the screws i got from holosun seemed way too short. I ordered the multiple screw kit from springfield armory's website and the screws they recommended to use were way too long (stuck halfway up into my optic window) I ended up using the RMR screws that came with the package from springfield they work but they also seem kind of short, they dont sit flush in the holes like my other optics
You use the SCS 320 screws. They will tighten up but you keep going. They aren’t too short. If anything they’re almost too long. Just keep tightening until they stop spinning. Just don’t gorilla it
I keep reading you need to take off 2-3 threads so that the screws (I think it's mainly the right one) doesn't interfere with the extractor spring.
When you click the link which optic is in the very first picture? Looks like the EPS but I want an optic to fill up the entire gap on the optic cut on the slide. Anyone?
It’s the Scs 320. That will fill it up the most out of any of thrse
@@freedomgorilla1 thank you so much!
What holster are you running.
None at the moment
Yea the scs is blurry because of the brightness issue. Not happy with it.
Nice
which screws should i use for the 507C?
The longest ones if they don’t bottom out
What screws do you need for the holosun scs320?
You use the ones that come with the Scs 320
You look like you could chew down a tree faster than a beaver. That's the most giga Chad jaw I have ever seen.
The music was really distracting.
Sorry
Who decided on the annoying circus music? More annoying than the usual guntuber metal guitar riffs.
Alright @freedomgorilla1 you already made me buy a 507c, but now with this video I’m going to get the comp Today 😂🦾 Love my echelon
Heck yea!