Arrma Limitless Speed Run 22/39 Hobbywing Max 8

Поделиться
HTML-код
  • Опубликовано: 13 сен 2024
  • Testing out my Hobbywing Max 8 combo on 22 pinion / 39 spur gear.
    Top speed run on this set up
    Upgrades and more videos to come
    GPS... New Motor... Dual Motors? Lets see how this turns out!

Комментарии • 13

  • @RC-CARS-WORLD
    @RC-CARS-WORLD 3 года назад +1

    Nice video bro 😃😃

  • @rcpd3157
    @rcpd3157 3 года назад

    It's the AMPs being drawn probably. You need 6mm bullets or something similar. Dean's are ok but not in a car lime this, imo. That lipo could also be bad, discharging to fast or something. Be careful with that. I don't know about this stuff really but my husband seen this to. Nice pass. That's a nice platform and pretty good system in it. Maybe try the XT-90 anti-spark connectors. Hopefully this makes sense and helps you. It's hard for me to explain my thoughts sometimes😉😂

  • @chrismetalwilson2588
    @chrismetalwilson2588 3 года назад +1

    Nice runs I'm running a 2200kv 34/34 set up in my rustler on 3s it runs mid 70s on 6s 85 on 3/4 throttle and add more fans temp to hot

  • @georgeshamuel
    @georgeshamuel 3 года назад +1

    Get rid of the dean plugs and you won’t have this problem any more, they can’t handle the amps. Stick with xt90 or ic5.

  • @arifsalleh2446
    @arifsalleh2446 3 года назад

    esc there is no cut. because I have used 4s, I cut the time to press it out..34tspur 28tpinion I use

  • @linzitazim
    @linzitazim 3 года назад +1

    Nice limitless.
    Go to xt90/xt150 connectors.
    Them deans are no good for a 1/7 car pulling numbers

  • @xdmackinx
    @xdmackinx 3 года назад

    Nice I just picked one up myself with the same combo. Would be nice to race them I’m in the same area. Let me know

    • @TooManyHobbies89
      @TooManyHobbies89  3 года назад

      I am in the 925 area, if 805 is your area code we are a bit far

    • @xdmackinx
      @xdmackinx 3 года назад

      @@TooManyHobbies89 I’m in the 925 close to that Bart I run there also

  • @Madhuntr
    @Madhuntr 3 года назад +1

    pls get rid of those t connectors. the will melt in due time and cant handle the currents you are running.
    and btw. did you really only get 66 mph out of 6 s with a 2600kv motor. or was that the only time you measured.
    becaus eim also running the Max8 as the combo package with a 2200kv motor and i run 68mph on 4s. and i wasnt even top speed since my parking lot was done. so also stock gearing.
    so either those connectors are youor bottleneck or you got a serious issue with the electronics

    • @TooManyHobbies89
      @TooManyHobbies89  3 года назад

      Deans are gone. I got 85mph max on the max8 combo with stock gearing. This video the pinion is smaller and the spur is bigger because I was drifting it before speed runs

    • @Madhuntr
      @Madhuntr 3 года назад

      @@TooManyHobbies89 ah ok that explains alot😂 but good thing you got rid of the deans.

  • @GyuHobbyRC
    @GyuHobbyRC 3 года назад

    I enjoyed a great video let's be friends.
    우리 친구 해요.~~~
    🤩🤩🤩🤩🤩