Thanks for the comment! I had same issue on rubber bands😅 You see I’m glued a rubber band to a part which shoot the bullet, but actually you don’t need to glue it, unless you cut deeper notch. You can also disassemble slides and barrel, so the rubberband is replaceable! I hope this will help you☺️
@@CardboardCraftKazu That is fantastic! I have been collecting some cardboard for my next project. I think I will try this. Great work as always! Very clean!
Of course! You mean it is able to shoot and also blowback? If so, I’m considering to make one for my next step! Btw this is first time to make blowback gun so quality might not be as good as you expected, but I’ll try my best!
@@Kenneth-xe6gf I don't know because I had never tried before, but I think its okay as long as the gun is same thickness if you could make little adjustment when needed. (ex: 3mm ×5 = 5mm×3)
ご視聴ありがとうございます！
フロントサイトとリアサイトはてきとーに作ってｼﾏｲﾏｼﾀ！！🙇♂️
Thanks for watching!
I made front and rear sight roughly!!!🙇♂️（sorry!）
Tríptico
It's 1:1 scale .Thank you for this vid.this helped me a lot.
Thank you for watching!!
@@CardboardCraftKazu welcome
I am never going to do this correctly lol
@@TNoob69 Lol 🤣🤣😂
brilliant. i must try it by myself
Nteresting i might make it
すごくカッコよくて作りたくてたまらない！
センスの塊〜
Wow its very similiar with Gta V Heavy pistol
スゲー！！本物みたい！
あ のう・・・解説テロップみたいなのは
考えてないですか？
凄くわかりやすい動画なんですが、もっと内容を把握したくて！！😆
惹きこまれてるだけなんです、エラそう言ってすみません😅
いつも高い技術力と緻密な作業に敬服します😄
ありがとうございます！解説テロップに関しては字幕機能で日本語、英語を作成中です！動画の中に入れると読める人が限られてしまいますので... なるべく一番見やすいように改善していきます！アドバイスありがとうございます！
I am the only and first watching
Thank you for watching!
印刷する紙はA4でも大丈夫ですか？
So amazing! Is there anyway to replace in rubberbands with springs? I just worry about the rubber bands breaking and not being able to replace.
Thanks for the comment! I had same issue on rubber bands😅 You see I’m glued a rubber band to a part which shoot the bullet, but actually you don’t need to glue it, unless you cut deeper notch. You can also disassemble slides and barrel, so the rubberband is replaceable! I hope this will help you☺️
@@CardboardCraftKazu That is fantastic! I have been collecting some cardboard for my next project. I think I will try this. Great work as always! Very clean!
This is very similir to a real m1911 i can tell the internals were desighned off of the real one
Thanks😊
@@CardboardCraftKazu how should i go about getting the springs for the bullets
@@ovizcarra8667 you mean, spring for shooting mechanism? I used rubber bands for it!
@@CardboardCraftKazu dont the bullets have springs in them?
@@ovizcarra8667 no, it’s just papers rolled around bamboo stick!
How do you cut the cardboard so smooth
I can't make it smooth
Awesome
Love from India ❤️
Thank you!!!
@@CardboardCraftKazu you're welcome btw I was looking a video like this and I finally found it 😀
Hola chicos
質問です バネの大きさはどのくらいのですか？
アイスの棒は何本使いますか？
ダンボールの厚さは何mmですか？
使っている材料は何ですか？
使ったボンドなどはどんな物ですか？
バネはボールペンの中のものでも大丈夫です🙆♂️
アイスの棒は百均でも購入可能ですが、トリガー部分は幅2cmのアイスの棒が必要になります。海外で買っているので日本で買えるかはわかりません。
段ボールの厚さは3ミリです。
材料は段ボール、アイスの棒、段ボールペーパー
接着剤はボンド、瞬間接着剤、グルーガンです。
アイスの棒は小さいノコギリや紙やすりがあると加工しやすいです。
お役に立てれば幸いです☺️
ありがとうございました😭助かります！
@@CardboardCraftKazu すみません💦まだ質問があります🙇♂️小さいノコギリやダンボールペーパーは100均で売っていますか？ アイスの棒のきる形はどこに書いてありますか？ 基本的にアイスの棒は何㎝のものを何本使っていますか？
@@user-mv8dz4yf2v ノコギリはホームセンターにあると思います。テンプレートは説明欄のリンクから飛べます。アイスの棒は幅約 9mm,18mm,25mm です。ダンボールペーパについては詳しくは分かりません。身近な例だと、マクドの袋などの段ボール色の紙袋が材質的には近いと思います。
@@CardboardCraftKazu 9mmは10mmのでも大丈夫ですか？ 棒の縦の長さはどのくらいのを使っていますか？
すごい
Farcry 5 gun 😎
お〜。さすが✨
( ˙꒳˙ )👍
İts the same model that you didnt give template right
もう少し簡単でかっこいい銃を作って欲しいです！お願いします！
ダンボールで！木もなるべく無しで作ってください！
少しゆっくりやってくださると参考になって良いです！色々かいてすみません・・・・
@@user-mv8dz4yf2v コメントありがとうございます！負荷のかかるパーツはアイスの棒じゃないと壊れやすくなってしまうので今回はアイスの棒で作りましたが、全部ダンボール、紙で簡単に作れる銃を検討してみます！リクエストが溜まっておりますのでもうしばらくお待ちください！
@@user-mv8dz4yf2v 私も作るのが難しくカメラワークを考えてないカットが多くて…🙇♂️スピードとカットで誤魔化してるシーンが多々あります🙇♂️申し訳ありません🙇♂️
返事ありがとうございます😊投稿頑張って下さい！
Please make the gloc 34 carboard and ar 15 tti please
Can I have the template for the magazine? it's not listed in the description
Thank you for telling me that! I will add it soon. sorry!
Can i buy it?
Why am I even here?
I have a request for you.Can you make a pistol with blowback system and magazine out of cardboard ?Please make it.
Of course! You mean it is able to shoot and also blowback? If so, I’m considering to make one for my next step! Btw this is first time to make blowback gun so quality might not be as good as you expected, but I’ll try my best!
what is the cardboard thickness you use?
3mm for all pieces☺️
@@CardboardCraftKazu nice nice, but can i also use a 5 or 2 mm?
@@Kenneth-xe6gf I don't know because I had never tried before, but I think its okay as long as the gun is same thickness if you could make little adjustment when needed. (ex: 3mm ×5 = 5mm×3)
@@CardboardCraftKazu thank youuuu!!!
Ficou top to com um canal novo da uma olhada lá
Awesome just subbed👍
Thanks!☺️
@Aziponz - haha 😄 you deserves more
what is the size of the bullet mm?
This quality is only suitable for children from primary school.😏
what do you call the stick thingy in 6:49?
What is the scale of the templates ?
Please adjust your template size using a 100mm line on templates. make it bigger by 106% or 107%!
@@CardboardCraftKazu thank you I'm using A4 paper 210*297mm
@@CardboardCraftKazu I just realised how to use that 100mm thing :)
Can you make one for me and then I pay you for it?
I don't cell this gun but I have an artshop selling my artworks↓
cardboardartistkazu.stores.jp/
Brought to school I got expelled
If you colored it black...😱