Hey friends! I’m preparing a small online course on how to paint your guitar with a glossy finish, even if you're a beginner and have no equipment, just using spray cans. It's currently in preparation and will be available soon. I invite you to join a waiting list, this way, when the course is released, you'll receive a small discount :) 👉 thefrenchguitarguy.com/index.php/painting-course-waitlist/
Dan Erlewine shared a great tip for spray paints/clearcoats where you leave the cans in a bucket of hot water for 20 minutes prior to using. It "melts" the paint and makes much more workable and spray out much thinner. I had to refurbish a very damaged telecaster neck with clear coat. It was my first time and I needed gloss. I was terrified. BUT, using this method it became really easy to add the small thin layers which didn't run.
@@CharlesNotBronson I think so. Your country may be hot but it’s not +60 degrees Celsius. It’s only for the cost of using hot water and you get a great benefit!
This is the most detailed yet simple guitar repaint instruction video i've ever seen, i literally have zero experience on painting but after watching this video i think i have my confident to repaint my guitar later, thank you!!
Hey everyone, thank you for watching the video. I just wanted to add a quick note. Of course, this is not a "real" painting method used by guitar manufacturers. It's just a way of doing things, which works for me and may work for you if you are beginners too (as there's no sanding and polishing involved). Graffiti paints is not be the best for this kind of work of course (any spray paint at all if you are a pro), but they work well and are not expensive. Obviously, I'm not a pro and there are a lot of other ways to do it, and I can only advise you to continue researching on RUclips before starting (especially with Brad Angove's videos, which are great). Above all, remember that you're doing this to have fun, and be kind to each other 🙂Also, you have probably noticed that I’m French, with a very French accent, but hey I’m working on it. Thank you, merci 🇫🇷
I have a cheap crappy lightly damaged fender sunn Mustang and a one off Nirvana cover gig coming up in 2 weeks.. (Im playing Pat Smear) so I was thinking of repainting this guitar to look like the blue strat-like guitar he used... this video seems to give me exactly the guidance I need! Merci!
Really good instructions , as in your previous videos I like that you include the mistakes, that is part of the learning process. And the guitar you made was absolutely awesome,from the colour to the design and logo. Ignore the comments on pronunciation , it is part of what makes ths videos uniquely you, keep up the good work :) and thank you.
Great video, very informative! I have an old BC Rich Warlock that I very stupidly and poorly painted in like 2006 or so that I've been meaning to restore for YEARS
I use an Iwata Medea Airbrush with a .05 needle and Createx paint. The Iwata atomizes the paint much more than a spray can. I then use Solarez for the clear coat. Solarez bullet proofs the finish against scratches, nicks, and dings. The secret sauce with the Solarez is that you brush it on with a foam brush and let it level for about an hour. Notice I said let it level. It won't dry. To dry it you take it outside in direct sunlight for 3 minutes and its completely dry. No waiting for days. Then I use a buffing wheel and remove all the imperfections, then I use a buffing wheel for the polish compound. The guitar looks like its been dipped in glass.
Your description and instructions on how to do that. Guito's awesome. Thank you. I'm getting ready to break down a guitar that I purchased and I wanna change the color so thank you
Just what I was looking for, beginners method recommending specific products! Will try this on the top of a Les Paul kit I made some time ago to turn it into a goldtop-ish , subed!
Another great video ! The result look awesome ! Roger can't wait to see it ;). Thanks for your videos, your work and to make an old black and white cat happy :)
I've seen a method that you spray 3 or 4 layers of glossy finish and a last one of a mat finish, this gives a very smooth surface, for the neck of the guitar it's perfect and feels very good.
Subscribed! Thanks for making this, got a free unloved guitar that was pretty banged up, i am planning to try to learn and if i reach a good milestone with my learning, i totally plan on re-painting the guitar to celebrate :)
I usually still wet sand my matte clear coat so it's a smooth texture. I'll finish it off by doing a very light polish by hand with a rag and some car polish- perfect matte finish!
Yeah you're absolutely right! I didn't want to add a sanding and polishing step here because you can quickly go through the varnish and this was a video for people who wanted to try it for the first time :)
I had been looking to use the MTN300 and MTN94 paints from Montana, and wondered if I'd get a decent result. Watching this I'm now keen to try! I also was thinking of using my bike stand as a rack for painting, so I found that really useful as well. I've really enjoyed watching your vids on guitar making-they're inspiring me to get in and get started-you make things very approachable and I, too, like that you leave in the mistakes... it helps me push my inner perfectionist out of the way, and realise that a) mistakes will happen and b) they're often recoverable! I have two Squier 40th Anniversary edition guitars (a Jazzmaster and Strat) and I love the matt finish. I love the fact you were able to get something comparable so simply...
Thanks a lot for those kind words! Yeah, if I can do it anybody can, it takes practice, trial and error, but hey this is fun! On my sparkle painting video, I used Montana painting so yeah, it works too
Happy New Year. Ahhh, just recently I wanted to repaint my guitar Miami blue and held off on that idea, because it's too hard lol. That spray doesn't seem to be available in my country but these tips were helpful for me. Thanks!
@@FrenchGuitarGuy wait, I just found a website that sells Flame orange cans! Thanks! If I have the time, energy and motivation, I'll give it a try lol!
Having painted guitars with gloss coat myself, you got to be very delicate with sanding. I started with 400 grit and slowly worked to 2000 grit. The higher the grit the easier polishing becomes with gloss. Good video though.
Thank you for all this great information! I want to repaint/change color of my Squier 40th Anniversary Jazzmaster Desert Sand. It is a mat finish which I love the look of but just not the color. Not sure what I will go with yet but this video helps a lot with some great tips and instructions. Thank you. And happy New Year!
Before change the paint i would invest 5 quid and half an hour or an hour on polishing the body slowly to check the colour on gloss finish, but be sure about that because it is irreversible
Super vidéo :) Switching to english because my question might be useful for someone else: have you tried the Nitrolack spray cans or other "guitar paint" spray cans bands ? Do you think it's possible to use your methods with those ? Only reason I ask is because they're supposed to have the "real" Fender colors that I like haha Thanks !
Hi Edouard! Really cool and very simple instruction video! I have a raw wood body - initially was painted, and my intention was to paint it with true oil and give it a natural look but the imperfection in the wood are too many! - do you have any suggestion on what primer or filler to use with this method? Something "compatible" with the graffiti paint? Thanks a lot!
Thanks a lot for your feedback! I use epoxy all over the body to "close" the pores of the wood, but when I have a big hole I use classic wood filler before. That way, it makes a hard coat of epoxy over the wood filler. Then I sand it lightly and paint it with my paint spray. Don't hesitate if you have any further questions :)
Hey man, awesome video I’m going to try out a few of your tips! I also wanted to let ya know that your audio and video isn’t synced up, it’s a tad distracting
Salut Edouard! Je mets mon commentaire en français pour faire plus simple. Merci pour ces astuces. J'aurais une question concernant les pickguard. J'en ai acheté un blanc pour ma telecaster que j'aimerais peindre en bleu ciel. C'est un pickguard en plastique. Je compte faire les étapes dont tu parles dans la vidéo mais pour la finition clear coat, je ne sais pas si c'est une bonne chose de mettre une finition mat car comme c'est un endroit ou le mediator (plectre de son petit nom français apparemment) va constamment glisser dessus, je me demande si ce ne serait pas contre productif. Et en même temps, je préfèrerais une finition mat sur mon pickguard pour contraster avec la couleur blanche brillante du corps de la guitare. Qu'en penses-tu?
En effet, tu peux avoir un risque que la peinture et le vernis se décroche si tu grattes trop fort dessus. Mais ce risque existe peu importe que ce soit une finition matte ou brillante, donc je pense que tu peux tenter le coup. Juste assure toi de bien poncer la pickguard avant de faire quoi que ce soit. Ensuite, comme c'est du plastique, je te conseille d'ajouter un apprêt spéciale plastique. À ce moment là tu pourras enfin peindre en bleu, puis vernir avec un vernis bi-composant 2K (important pour être certain d'avoir une bonne resistance !). Dernier conseil, un pickguard c'est souple mais le vernis bi-composant est dur, donc évite au maximum de plier ou de courber le pickguard, tu provoquerais des craquelures ! Bon courage, hésite pas à m'envoyer une photo sur mon Insta, je serai curieux de voir le résultat 🙂
@@FrenchGuitarGuy Merci beaucoup de la réponse rapide! Super je vais prendre tous tes conseils en compte! Pour la photo, malheureusement je n'ai pas instagram mais je vais essayer ☺️
I assume if you wanted to have some art put on it but only after doing the initial sanding and paint coat then it would be stuck permanently when you do the mat clearcoat yes?? I ask because I purchased a guitar which is military green but I am going to have it made into a Boba Fett guitar.
Hello, ça dépend de la couleur. Si c'est un metallic oui c'est conseillé, si c'est une couleur uni d'une bombe de peinture (comme là), non ce n'est pas la peine. Par contre il faut surement mettre un bouche-pore sur le bois :)
I gave up on paint+cleancoat, the sanding/buffing part is what is killing me, I just use tungoil on necks and on the body if I want something fancy just a thin stain that will look good with time when the wood pops up via natural usage.
Salut Edouard ! super vidéo qui va grandement m'aider quand j'aurai fini la fabrication de mon corps custom 🙂 Cette couleur est magnifique ! Te souviens tu du code couleur chez Molotow ? Le nuancier du site me fait tourner la tête et j'ai du mal à trouver un bleu qui me plaît
I got a "nitro" finsih tele body. Beautifull green metalic color. BUT, first i realise that is really soft, you can put your finger nail print on it very easly(like on some Gibsons). Wich is not bad for a relic job, but that cracking proces does not work? Does it mean its not a REAL nitro? Its some sort of acrylic sont paint? Im not an expert. Can you give me some advice?
Only one thing I would change: before spraying matte, build 3 layers of 2k clear gloss from the same brand. Let that dry, then level sand. Then go over it with one or two final layers of matte. You won’t get orange peel that way, and it will look much more professional.
Hi, if you want to add competition stripes, I would suggest to paint the body first, add your stripes, and then add a pretty thick clear coat over the paint and the stripe to uniform the look/finish and not feel the thickness of the strips
@@Luth-t3e It’s a long and tedious task but it works. For simplicity I would paint over the original painting, but hey, in the end, everyone does as they please!
I don’t know… you’re right, but you can experiment with an old guitar and learn step by step how to do it. As long you’re happy with the result, and you have fun doing it, you can do whatever you want.
Hello! Yes, it is important to make both vertical and horizontal passes regardless of the wood grain direction. It's to ensures even coverage and smooth blending of the paint (and no lines of the paint direction). Since a pore-filler layer has already been applied (or here the previous paint), the wood grain won't affect the paint's adherence or appearance. By using both directions, you avoid streaks and achieve a flawless finish 🙂
Hey friends! I’m preparing a small online course on how to paint your guitar with a glossy finish, even if you're a beginner and have no equipment, just using spray cans. It's currently in preparation and will be available soon. I invite you to join a waiting list, this way, when the course is released, you'll receive a small discount :) 👉 thefrenchguitarguy.com/index.php/painting-course-waitlist/
Dan Erlewine shared a great tip for spray paints/clearcoats where you leave the cans in a bucket of hot water for 20 minutes prior to using. It "melts" the paint and makes much more workable and spray out much thinner.
I had to refurbish a very damaged telecaster neck with clear coat. It was my first time and I needed gloss. I was terrified. BUT, using this method it became really easy to add the small thin layers which didn't run.
Hi. Do I still need to do Dan's tip even though I'm from a tropical country (Philippines)?
@@CharlesNotBronson I think so. Your country may be hot but it’s not +60 degrees Celsius. It’s only for the cost of using hot water and you get a great benefit!
Thanks @@danielwatson7540! Will try this out!
This is the most detailed yet simple guitar repaint instruction video i've ever seen, i literally have zero experience on painting but after watching this video i think i have my confident to repaint my guitar later, thank you!!
Thank you man! That was exactly the feeling I wanted to give. Have fun with your project!
And me too - from Western Australia ... the matt finish seems to be a nice look :)
Hey everyone, thank you for watching the video. I just wanted to add a quick note. Of course, this is not a "real" painting method used by guitar manufacturers. It's just a way of doing things, which works for me and may work for you if you are beginners too (as there's no sanding and polishing involved). Graffiti paints is not be the best for this kind of work of course (any spray paint at all if you are a pro), but they work well and are not expensive. Obviously, I'm not a pro and there are a lot of other ways to do it, and I can only advise you to continue researching on RUclips before starting (especially with Brad Angove's videos, which are great). Above all, remember that you're doing this to have fun, and be kind to each other 🙂Also, you have probably noticed that I’m French, with a very French accent, but hey I’m working on it. Thank you, merci 🇫🇷
Came for the lumpy green paintjob
Stayed for the Inspector Cluseau accent 👍😎
😂
Happy new year everyone! Thanks for the 1,000 subs 💪Help me reach the 4,000 public watch hours!
I have a cheap crappy lightly damaged fender sunn Mustang and a one off Nirvana cover gig coming up in 2 weeks.. (Im playing Pat Smear) so I was thinking of repainting this guitar to look like the blue strat-like guitar he used... this video seems to give me exactly the guidance I need! Merci!
Take your time with it and don’t rush-I’ve seen far too many blue Mustang “recreations” that look like complete shhhhh!t.
Really good instructions , as in your previous videos I like that you include the mistakes, that is part of the learning process. And the guitar you made was absolutely awesome,from the colour to the design and logo. Ignore the comments on pronunciation , it is part of what makes ths videos uniquely you, keep up the good work :) and thank you.
Thanks a lot for those kind words, it means a lot! 😌
I've got a guitar I want to re paint. You've motivated me, aside from the not having space to do this. Maybe some time soon.
Yeah, go for it! 💪
Great video, very informative! I have an old BC Rich Warlock that I very stupidly and poorly painted in like 2006 or so that I've been meaning to restore for YEARS
I use an Iwata Medea Airbrush with a .05 needle and Createx paint. The Iwata atomizes the paint much more than a spray can. I then use Solarez for the clear coat. Solarez bullet proofs the finish against scratches, nicks, and dings. The secret sauce with the Solarez is that you brush it on with a foam brush and let it level for about an hour. Notice I said let it level. It won't dry. To dry it you take it outside in direct sunlight for 3 minutes and its completely dry. No waiting for days. Then I use a buffing wheel and remove all the imperfections, then I use a buffing wheel for the polish compound. The guitar looks like its been dipped in glass.
Do you have pics of your guitars online somewhere? I'd love to check them out!
I would love to try Solarez UV clear coat, but it's very hard to find outside US..
Your description and instructions on how to do that. Guito's awesome. Thank you. I'm getting ready to break down a guitar that I purchased and I wanna change the color so thank you
Just what I was looking for, beginners method recommending specific products! Will try this on the top of a Les Paul kit I made some time ago to turn it into a goldtop-ish , subed!
Excellent video! I chuckle to myself when I listen to your much larger English vocabulary than most "English as a first language" You Tubers. Salute!
Thanks a lot! Really appreciate
Another great video ! The result look awesome ! Roger can't wait to see it ;). Thanks for your videos, your work and to make an old black and white cat happy :)
I never thought of using grafitti paint! You've got yourself a new subscriber!
Thanks a lot man!
That is a really good tutorial, I think you convinced me to give it a shot since I love that matt finish.
Yeah! Good luck
I've seen a method that you spray 3 or 4 layers of glossy finish and a last one of a mat finish, this gives a very smooth surface, for the neck of the guitar it's perfect and feels very good.
Interesting!
Super informative! Just subbed. Cheers from Portland!
Subscribed! Thanks for making this, got a free unloved guitar that was pretty banged up, i am planning to try to learn and if i reach a good milestone with my learning, i totally plan on re-painting the guitar to celebrate :)
Thank you so much
I usually still wet sand my matte clear coat so it's a smooth texture. I'll finish it off by doing a very light polish by hand with a rag and some car polish- perfect matte finish!
Yeah you're absolutely right! I didn't want to add a sanding and polishing step here because you can quickly go through the varnish and this was a video for people who wanted to try it for the first time :)
Well done instructions. You touched on alot of things that i ran into on my first
refinishing project.
Glad it was helpful!
Cool stuff! Thanks for sharing this method.
Thanks buddy!
Great video, very informative, and you have inspired me to try this at home. Thanks and happy new year (bonne année)!
😁 Happy new year!
I had been looking to use the MTN300 and MTN94 paints from Montana, and wondered if I'd get a decent result. Watching this I'm now keen to try! I also was thinking of using my bike stand as a rack for painting, so I found that really useful as well. I've really enjoyed watching your vids on guitar making-they're inspiring me to get in and get started-you make things very approachable and I, too, like that you leave in the mistakes... it helps me push my inner perfectionist out of the way, and realise that a) mistakes will happen and b) they're often recoverable!
I have two Squier 40th Anniversary edition guitars (a Jazzmaster and Strat) and I love the matt finish. I love the fact you were able to get something comparable so simply...
Thanks a lot for those kind words! Yeah, if I can do it anybody can, it takes practice, trial and error, but hey this is fun!
On my sparkle painting video, I used Montana painting so yeah, it works too
@@FrenchGuitarGuy ooh-that’s on my “To watch” list. I’ll be sure to check it out…
Happy New Year. Ahhh, just recently I wanted to repaint my guitar Miami blue and held off on that idea, because it's too hard lol.
That spray doesn't seem to be available in my country but these tips were helpful for me. Thanks!
Happy new year! I've tried with Montana cans and they work too, maybe you can find these cans in your country?
@@FrenchGuitarGuy wait, I just found a website that sells Flame orange cans! Thanks! If I have the time, energy and motivation, I'll give it a try lol!
@@doyleeee Yeah awesome! Share it to me on Instagram later
@@doyleeee I haven't found the Flame Orange in the US yet. Do you have a link? Thanks
Try this one: molotow-na.com/catalog/molotow-spray-paint-c-26_35.html
It works with Belton spay can because it’s the same company🙂
You did a great job with this!
Great video man! Watched it from start to end and I'm not even repainting A guitar atm. Just interested,,
Great production quality on this video!
great video and editing, should have lots more views and subs 😊😊😊
Thanks! Working on it💪
Very nice detailed and very helpfull video. I would love to see video how to make mirror finish on guitar 😄
Thanks! Noted
This video is so good ! I though you had 500,000 subscribers I subbed!
Thanks! That would be great ahah
Great Video and good informations 👍
Thanks! Glad you enjoyed it
Think I’ll give this a go. Thanks!
Hey! Just found your channel and I will definetly subscribe. Could you make a guitar building tutorial or a tips and trocks video in the future?
Thanks a lot! Yeah that could be a video for the future!
Having painted guitars with gloss coat myself, you got to be very delicate with sanding. I started with 400 grit and slowly worked to 2000 grit. The higher the grit the easier polishing becomes with gloss. Good video though.
Yeah you need to be relax and delicate, thanks man!
color is pretty cool
Thansk!
Bravo pour la vidéo, c'est très bien édité et on voit que tu y met beaucoup d'effort. Tu vas allez loin, c'est un bon format ;-)
Merci beaucoup de ton retour, ça fait plaisir. J'aime beaucoup tes videos 🙂
Thank you for all this great information! I want to repaint/change color of my Squier 40th Anniversary Jazzmaster Desert Sand. It is a mat finish which I love the look of but just not the color. Not sure what I will go with yet but this video helps a lot with some great tips and instructions. Thank you. And happy New Year!
Thanks buddy! Oh those guitars are cool! Happy new year 🙂
Before change the paint i would invest 5 quid and half an hour or an hour on polishing the body slowly to check the colour on gloss finish, but be sure about that because it is irreversible
@@guelintonquiu6933 Yep, irreversible!
Great vid mate.
Thanks 🙂
Almost to 4k subs. Nice video!
@@MonkeyBall2453 Yeah that’s crazy! Thanks a lot
You’re the best istg dude that for the amazing video
Thanks a lot, I appreciate!
Amazing video and so informative! New subscriber! :)
Alright Frenchy, ya got my sub. Good work
Thank you my friend!
Really useful video, and excellent English, too! Did you varnish the guitar after applying the paint?
Thanks a lot!! Yeah I varnished with the 2k clear coat
i wish i saw this before i paint my guitar
great video
Very nice job! How do you paint the headstock with your logo?
Thanks! This time I engraved the logo with a tool. But otherwise I’m using waterslide decal. You can find a lot of videos about it 😊
Super vidéo :)
Switching to english because my question might be useful for someone else: have you tried the Nitrolack spray cans or other "guitar paint" spray cans bands ?
Do you think it's possible to use your methods with those ?
Only reason I ask is because they're supposed to have the "real" Fender colors that I like haha
Thanks !
Hello, merci ! Yes, in the next video ;)
Hi Edouard! Really cool and very simple instruction video! I have a raw wood body - initially was painted, and my intention was to paint it with true oil and give it a natural look but the imperfection in the wood are too many! - do you have any suggestion on what primer or filler to use with this method? Something "compatible" with the graffiti paint? Thanks a lot!
Thanks a lot for your feedback! I use epoxy all over the body to "close" the pores of the wood, but when I have a big hole I use classic wood filler before. That way, it makes a hard coat of epoxy over the wood filler. Then I sand it lightly and paint it with my paint spray. Don't hesitate if you have any further questions :)
Hey man, awesome video I’m going to try out a few of your tips! I also wanted to let ya know that your audio and video isn’t synced up, it’s a tad distracting
You make great vids (+1)😀
Thanks a lot, glad you like them!
What flame orange can color did you use? Thanks for the video
Riviera #FO602
Lagoon Blue #FO604
Menthol #FO666
Hello! Yeah that was 602-Riviera! :)
Salut Edouard! Je mets mon commentaire en français pour faire plus simple. Merci pour ces astuces. J'aurais une question concernant les pickguard. J'en ai acheté un blanc pour ma telecaster que j'aimerais peindre en bleu ciel. C'est un pickguard en plastique. Je compte faire les étapes dont tu parles dans la vidéo mais pour la finition clear coat, je ne sais pas si c'est une bonne chose de mettre une finition mat car comme c'est un endroit ou le mediator (plectre de son petit nom français apparemment) va constamment glisser dessus, je me demande si ce ne serait pas contre productif. Et en même temps, je préfèrerais une finition mat sur mon pickguard pour contraster avec la couleur blanche brillante du corps de la guitare.
Qu'en penses-tu?
En effet, tu peux avoir un risque que la peinture et le vernis se décroche si tu grattes trop fort dessus. Mais ce risque existe peu importe que ce soit une finition matte ou brillante, donc je pense que tu peux tenter le coup. Juste assure toi de bien poncer la pickguard avant de faire quoi que ce soit. Ensuite, comme c'est du plastique, je te conseille d'ajouter un apprêt spéciale plastique. À ce moment là tu pourras enfin peindre en bleu, puis vernir avec un vernis bi-composant 2K (important pour être certain d'avoir une bonne resistance !). Dernier conseil, un pickguard c'est souple mais le vernis bi-composant est dur, donc évite au maximum de plier ou de courber le pickguard, tu provoquerais des craquelures ! Bon courage, hésite pas à m'envoyer une photo sur mon Insta, je serai curieux de voir le résultat 🙂
@@FrenchGuitarGuy Merci beaucoup de la réponse rapide! Super je vais prendre tous tes conseils en compte! Pour la photo, malheureusement je n'ai pas instagram mais je vais essayer ☺️
I assume if you wanted to have some art put on it but only after doing the initial sanding and paint coat then it would be stuck permanently when you do the mat clearcoat yes?? I ask because I purchased a guitar which is military green but I am going to have it made into a Boba Fett guitar.
Hello! Yes, if you just want to draw on the current paint, just do a light sanding, draw your art and then clear coat over it :)
Bonjour, est ce que si l’on part d’un bois brut il faut mettre un primaire avant là couleur ?
Hello, ça dépend de la couleur. Si c'est un metallic oui c'est conseillé, si c'est une couleur uni d'une bombe de peinture (comme là), non ce n'est pas la peine. Par contre il faut surement mettre un bouche-pore sur le bois :)
Hey I like process but I already sanded it down to wood what do I need to do
I gave up on paint+cleancoat, the sanding/buffing part is what is killing me, I just use tungoil on necks and on the body if I want something fancy just a thin stain that will look good with time when the wood pops up via natural usage.
Nice!
Salut Edouard ! super vidéo qui va grandement m'aider quand j'aurai fini la fabrication de mon corps custom 🙂
Cette couleur est magnifique ! Te souviens tu du code couleur chez Molotow ? Le nuancier du site me fait tourner la tête et j'ai du mal à trouver un bleu qui me plaît
Salut ! Merci 🙂 Oui c’est Riviera Blue que j’ai achetée sur le site de « Urban Painter »
I got a "nitro" finsih tele body. Beautifull green metalic color. BUT, first i realise that is really soft, you can put your finger nail print on it very easly(like on some Gibsons). Wich is not bad for a relic job, but that cracking proces does not work? Does it mean its not a REAL nitro? Its some sort of acrylic sont paint? Im not an expert. Can you give me some advice?
Only one thing I would change: before spraying matte, build 3 layers of 2k clear gloss from the same brand. Let that dry, then level sand. Then go over it with one or two final layers of matte. You won’t get orange peel that way, and it will look much more professional.
Oh nice! Thanks for the tips 😀
Is it the same technique if I do like a sunburst design or pinstripes??
Do you have a tutorial for like how to add like details in difrent colours like for example some stripes?
Or like should you add the details afther the orginal paint has dried but before the clear coat or with the orginal paint or afther the clear coat?
Hi, if you want to add competition stripes, I would suggest to paint the body first, add your stripes, and then add a pretty thick clear coat over the paint and the stripe to uniform the look/finish and not feel the thickness of the strips
how many cans of spray paint and clearcoat do i need?
What do you guys think about using heat to scratch the paint as in this video? ruclips.net/video/xDTW0RX-n-A/видео.html
@@Luth-t3e It’s a long and tedious task but it works. For simplicity I would paint over the original painting, but hey, in the end, everyone does as they please!
painting is a serious job take it to a pro is the best option
I don’t know… you’re right, but you can experiment with an old guitar and learn step by step how to do it. As long you’re happy with the result, and you have fun doing it, you can do whatever you want.
What is that guitar body? Looks like some kind of jaguar… definitely an offset.
Hi it's a body I've made. You can find the video on my channel (the Telecaster one)
Belton is brilliant. The flame stuff isn’t the same though.
You're right not exactly the same, but fairly close. BTW cool channel, I liked your pickguard video!
@@FrenchGuitarGuy oh thanks man. ❤️
@@FrenchGuitarGuy so cheap aswell the belton original is about £4 a can.
220-320 grit
Acetone
Spray paint
2k mat clear coat
Yep, that the recipe
horizontal and vertical? you alternate each layer?? bro, you are supposed to go with the grain of the wood. which is almost always horizontal.
Hello! Yes, it is important to make both vertical and horizontal passes regardless of the wood grain direction. It's to ensures even coverage and smooth blending of the paint (and no lines of the paint direction). Since a pore-filler layer has already been applied (or here the previous paint), the wood grain won't affect the paint's adherence or appearance. By using both directions, you avoid streaks and achieve a flawless finish 🙂
Why in the "F" did he paint the same color it's redundant.
Because he said in the beginning of thie video if you watched it, The paint job had drips and wasn't a good enough job to send it so a subscriber.
francais ? vu laccent
Devine ? 😉
Can you make an english version of this video? I don't speak french.
I know I don't have a great accent, sorry. That's why I've put subtitles
@@FrenchGuitarGuy . No. You have a great accent. Too great. I'll give you a thumbs up.
You're fine. @@FrenchGuitarGuy
@@hunkydorian Thanks buddy :)
The paint job looks like crap.
You have a good vocabulary and grammar. How come that you have such a terrible pronunciation, somehow like Indian od Pakistani IT youtubers?
Because it's not my native language
@@FrenchGuitarGuy I am Croatian, and nobody around me speaks English with such a terrible accent. It is French thing.
@@VanjaSpirin Thanks for those kind words buddy
@@VanjaSpirinWhy do you write in that odd manner? It must be a vanja problem?
@@stingylizard I would strongly suggest you to learn proper English if you want to be youtuber. That is the only problem.