Lol can't help it boats are fun definitely good to have a rescue plan found that out the hard way in the past proboat makes some nice stuff you know you want one 🤣😅😅
Hate to say it but those old plastic gears give the boat a nice sound once away from the shore!! Great rescue idea maybe I need a smaller boat instead of o fishing pole!!
I watched every second of the rescue with great interest, having had to do the same many times myself. In fact, I just watched a similar rescue only today on Run That RC, and spent part of this afternoon staring at the innards of my own RC outboard motor after it ate its own flex-drive system. At least the gear teeth on your PT109 survived, so you´ll be able to refit them, though they are quite slender, aren´t they? Man, it looked good for the short time it was planing! I look forward to seeing this boat back in action.
The 109 looks Sharp Brother Brent 💯 I'll be taking a pair of shorts and towel 😂😆 Nice rescue with the Cruiser 🏁 time to research brass gears? ✌🤠👍 HFLPRCing 👍😎👍 AOAH 🌟 RCF4L 🙏 Stay Safe and Play Healthy My Friend
That did go well, but did have a feeling those gears would not last. I wonder if a 2 motor conversion would be the way to go because it it sits so well in the water.
It worked great until it didn’t! 😂 I thought it sounded gear driven when you first started it. I’ll try looking at it on a bigger screen later. I’m wondering if you could adapt some spur gears off some car in place of those?? Have a great day and be safe out there!
Ditch the giant 50 star flag on the stern and the water line should be lower. You can easily make a rectangle with PVC pipe with a fork protruding from the front to fit over your rescue boat. It would make retrieval much easier.
I found no translation for "Fahrtbild". So the PT looks great how it plows through the water before the issue. It's good to have a plan B either a rescue boat👍 or a long stick😒 or swim pants and a towel😖. If the boat is straightend to the shore, you can use the rudder as a paddle by turning it from left to right repeatly.
why I carry a telescoping fishing rod in my battery+transmitter caddy, has also rescued small aircraft from those grabby trees! back when.. 540 motor direct drive into a Dumas nylon prop for a .09 engine was very good for a submerse prop, for a surface prop arrangement it was Octura X-427 (1.4 pitch 27 mm diameter), running a 16D mod motor. bummer the gear set let go like that but things happen. to go direct drive it'd be "criminal" shaving and filling, then putting one shaft down the center, but it'd be much quicker and lots quieter anyway. another option is dual 380 motors direct drive into Dumas nylon props for an .049 matches up pretty good. dual 380's run about same speed as a single 540.
Lol yeah I had a feeling this would happen but I love the sound of the gear drive like using a rescue boat it makes it a whole new adventure lol I will probably be doing twin 540 silver cans might as well have some power hope i can find a set of counter rotation props
@@AdventureTimeRC dual 390's for sure plenty, they'd share the load and both could run .09 props. counter rotating definitely have to set both motors to neutral brush timing then wire parallel, they'll run in step at their most efficient least current draw.. neutral timed would run 12-13 mph. but wouldn't worry it. two 390's spinning standard CCW into standard props with those dual rudders won't do anything bizarre, should shove it along 15 mph too once rolling. two 540's and battery to feed starts getting heavy.
Oh Brint...... That went well - until it didn't!! 😞 I don't know if Lindbergh did it intentionally, but that thing screamed like a Detroit Diesel!! She looked great out there though!
![Lil Uzi Vert - Chill Bae [Official Music Video]](http://i.ytimg.com/vi/D7F42F_JM3U/mqdefault.jpg)
Way to go Brent. You and Gerry have me looking at these dang boats now lol 😆. Awesome ship. Looks like fun
Lol can't help it boats are fun definitely good to have a rescue plan found that out the hard way in the past proboat makes some nice stuff you know you want one 🤣😅😅
So glad to see you run it! It looks awesome! Very exciting!
Thank you very much I appreciate it
Honestly, Ive been running my boats slow and steady, I love watching them slowly move through the water. What an awesome looking hull youve got here
Thank you I love cruiser boats I have several old nikko boats but fast is fun to lol
@@AdventureTimeRC fast kills my batteries hahaha. Poor lipos get too puffy from boats
Rescue boat is gorgeous 😍
Nice video my friend👍
Thank you very much
The PT 109 looks awesome. Hope it’s an easy fix. Awesome rescue operation!
Thank you very much
Very cool rc boat😁👍👍👍
Thank you very much my friend
Looks good Brent. Nice rescue there at the end as well bud.
Thank you Nick it was fun while it lasted
OMG, rescued by the SUPER CRUISER.!! Beautiful boat, the both of them. Well done my brother.!!🛥🚤
one of these days I gotta get doing some boat videos. couple old Graupner's and several scratch builds.
Hate to say it but those old plastic gears give the boat a nice sound once away from the shore!! Great rescue idea maybe I need a smaller boat instead of o fishing pole!!
Lok i do love the sound when they work i will probably build a dedicated tug boat for rescue lol I play with allot of sketchy boats
Great looking boat, really sounds the part too!
Thank you very much
Looks good out there on the water,cool boat
Thank you very much brother
Awesome rescue Brent! Good thinking to bring a retrieval rig! Hope to see it back out there!👍😊
Thank you Jeremy I will get her all fixed up
This boat looks awesome man
Thank you very much I appreciate it
Great video my rc friend 😃👍
Thank you very much
enjoyed the mission I really got into it
Yeah that thing looks fun 👉👍
Thank you very much I hope to get it fixed soon
Wow, that's a very nice warship.
Thank you very much my friend
beautiful very nice warship
Thank you very much
That looks awesome out there mate hope to see round 2😁👍✌🙋♂️
Thank you ill get her fixed up
Good thing you had the back up boat!
Thank you very much my friend
that is so cool brother sorry if ive missed any video struggling to keep up with everybody's👍🇬🇧😎🤟😊👊
Not a problem Leon I can't keep up either to many good channel s ro watch not enough hours in a day
Awesome PT 109. Sounds awesome and fast. I like it. It's always good to have a ex boat. Great job . Have a great weekend
Thank you very much my friend I appreciate it
oh now that's a nice voyager bro I'm slowly thinking about a boat
Nice maiden 💪🏾💯
Looks great big like
Thank you very much I appreciate it
Awesome rescue Brent!! Lol
Thank you Shawn I appreciate it
@@AdventureTimeRC your welcome Brent!
That boat was working good brother till it said no more time to get it fixed and try again thanks for the share
Thank you very much brother I appreciate it
Well it looks great! hope you can fix it!
Thank you very much brother
Very cool, but, ALL your vids are cool!!!!!!!!!!! 😉👍✌
Thank you very much I really appreciate it
I watched every second of the rescue with great interest, having had to do the same many times myself. In fact, I just watched a similar rescue only today on Run That RC, and spent part of this afternoon staring at the innards of my own RC outboard motor after it ate its own flex-drive system.
At least the gear teeth on your PT109 survived, so you´ll be able to refit them, though they are quite slender, aren´t they?
Man, it looked good for the short time it was planing! I look forward to seeing this boat back in action.
Thank you Del ill sort it all out thinking twin 540 is the way to go i have a few more boat projects I hope to get done this summer
Thats pretty cool! 😁😁👍👍
Thank you very much I appreciate it
It was a good maiden while it lasted. It’s ways goof to have a fetch boat on standby! 😂 I’m sure you’ll get it all sorted out!👍🏻👊🏼🍻
Thank you very much ill have it fixed soonish lol
That rips pretty good
Thank you very much my friend
good job 👍👍👍👍👍
Thank you very much my friend
That is very cool bro
Thank you brother
Good idea bring a rescue boat!
Sounded awesome til it quit lol. Nice rescue. I use to take a fishing pole to hook mine when they quit.
Yeah I was afraid of damage ro the fine details on the deck from a fishing pole on this one lol or that would have been a great way to rescue
Cool 👍😎😁👍
Thank you very much my friend
The 109 looks Sharp Brother Brent 💯 I'll be taking a pair of shorts and towel 😂😆 Nice rescue with the Cruiser 🏁 time to research brass gears?
✌🤠👍 HFLPRCing 👍😎👍 AOAH 🌟 RCF4L 🙏 Stay Safe and Play Healthy My Friend
Lol thanks Larry your Stealthwake did great fun boat
That did go well, but did have a feeling those gears would not last. I wonder if a 2 motor conversion would be the way to go because it it sits so well in the water.
Me to I knew they were going to fail but had ro try love the sound of the gears thanks for watching Malcolm
PT 109 looks great yea those old set ups r not to reliable nice rescue 👍
I had a feeling this would probably happen lol
It worked great until it didn’t! 😂 I thought it sounded gear driven when you first started it. I’ll try looking at it on a bigger screen later. I’m wondering if you could adapt some spur gears off some car in place of those??
Have a great day and be safe out there!
Thank you very much I appreciate it I will probably do a twin 540 direct drive setup
Ditch the giant 50 star flag on the stern and the water line should be lower.
You can easily make a rectangle with PVC pipe with a fork protruding from the front to fit over your rescue boat. It would make retrieval much easier.
Take fishing pole with you put a tri hook on the line and a bobber up two to three feet. You can cast it over the boat and wind it in.😊
Lol that would be fun
I found no translation for "Fahrtbild". So the PT looks great how it plows through the water before the issue. It's good to have a plan B either a rescue boat👍 or a long stick😒 or swim pants and a towel😖. If the boat is straightend to the shore, you can use the rudder as a paddle by turning it from left to right repeatly.
Thank you very much it did sound good for a while lol
why I carry a telescoping fishing rod in my battery+transmitter caddy, has also rescued small aircraft from those grabby trees! back when.. 540 motor direct drive into a Dumas nylon prop for a .09 engine was very good for a submerse prop, for a surface prop arrangement it was Octura X-427 (1.4 pitch 27 mm diameter), running a 16D mod motor. bummer the gear set let go like that but things happen.
to go direct drive it'd be "criminal" shaving and filling, then putting one shaft down the center, but it'd be much quicker and lots quieter anyway. another option is dual 380 motors direct drive into Dumas nylon props for an .049 matches up pretty good. dual 380's run about same speed as a single 540.
Lol yeah I had a feeling this would happen but I love the sound of the gear drive like using a rescue boat it makes it a whole new adventure lol I will probably be doing twin 540 silver cans might as well have some power hope i can find a set of counter rotation props
@@AdventureTimeRC dual 390's for sure plenty, they'd share the load and both could run .09 props. counter rotating definitely have to set both motors to neutral brush timing then wire parallel, they'll run in step at their most efficient least current draw.. neutral timed would run 12-13 mph.
but wouldn't worry it. two 390's spinning standard CCW into standard props with those dual rudders won't do anything bizarre, should shove it along 15 mph too once rolling. two 540's and battery to feed starts getting heavy.
@@AdventureTimeRC dual motors direct drive does give a pretty nice whine either way wired parallel running in step.
Oh Brint...... That went well - until it didn't!! 😞
I don't know if Lindbergh did it intentionally, but that thing screamed like a Detroit Diesel!! She looked great out there though!
It sounded so good while it was running lol its ok now I can do the twin 540 direct drive setup
rescue boats are crucial or be ready to swim lol,youll get it right yea that blue stuff gotta go more like the 60s
Definitely lol I need to get the duel direct drive motors in
@@AdventureTimeRC knowing is half the battle=g.i. Joe /you'll get her right✌️
Pfff, fire some darned torpedoes already! :D
Lol that would be cool
Thats a shame it broke!
I keep seeing you in every comment section 😅
Lol I try to watch and comment on as many videos as I can live seeing what everyone is working on
I thought you would pull back when the gear sound go weird at 1:44 :/
Once I heard the gears I knew it was done figured I would enjoy what time it had will be back out this spring with direct drive
I thought it had a diesel in it😜
Thank you I do love the sound when its working
D'oh! 00