HELP! I can't decide on a color for the truck... the most commented color or the comment with the most likes is what I'll pick! UNLESS it's shit brown, hot pink, or some other horrible color you guys will troll me with.
Paint shop is gonna be like "Cool dude you sanded it for us that actually helps us a lot, we'll take care of it no problem" *Mike leaves* "Sand again, sand EVERYTHING again"
@@infernotogo8133Togo when you send shit into paint you get it out. trying to save him money. I would charge someone more if they sanded for me. Maybe that truck didn't need to go to metal ( it does) after he sands it probably would. more work more money
I get that Mike wants to contribute to the work, but just to jump in with a $30 palm sander without even taking off the chrome wheel arch trims is maybe not the best idea
The body shop is going to hack all that body filler out and start over with fresh metal anything other then that the rust will come back through your new paint job
They may use a more expensive filler, but it will not adhere propery. Mustang lab is correct, the RIGHT way to do it is down to bare metal, and work the metal to reduce the amount of filler
Mike G I have a feeling they are going to look at hm like he’s an idiot... then be like we can make this look ok for about a week. The if you want it done right we’ll have to cut all the rot out..
Tomowenazin I’ve said it a thousand times this guy is a rich clueless wanna be cat guy. He doesn’t build a damn thing. I wouldn’t have my car where it is without a lot of help. However eat least the whole time I was out there turning wrenches and actually learning and working on the damn thing.
Uploads video tomorrow “I plasti dipped my OBS Chevy truck in my driveway *Didn’t Go as Planned!*” and two months later “This is why you don’t do you’re own paint prep” 🤦🏻♂️
@@SurviventheOnslaught Even at Maaco they're going to charge a lot of money if Mike wants all that rust and body work done along with clear coated special color. I've had Maaco paint some new parts and damaged areas. They are not anywhere as cheap as people think (for a fully prepped clear coated paint job). But they are still a lot cheaper than a well known paint specialist shop. But some times you get what you paid for. I've had some bad experiences and good experiences with Maaco paint jobs.
Body work is a damn gift brother. I did the bodywork on my 66 mustang, sand, Bondo, sand, Bondo X 20 more times, and after paint definitely imperfections here and there. My big problem was eventually down the road the rust pushed through and lifted parts of the paint near my door seals. It's a great learning experience but once the pros can take over it will be 👌
Back in 87 Chevrolet introduced their new 1988 models. My roommate at the time bought an extended cab long bed. That sucker was like a stretch limo! Rode so smooth & handled well at 90 MPH on the freeway. This was in Texas- away from the Gulf & yet the truck was about a year old & GM replaced the roof because it was already rusting out. I'm sure they corrected that problem by 93. Can't wait to see the finished product.
Yeah, I just used the one that's like a third of the price of the 3M brand one and it worked great. That was about a week ago and I did fuck up on tearing the moulding off and now there's big chips of paint gone on my door
haha yea i would use one for my truck i have a 98 z71 and the that had it before me ripped off the stuff and didnt give a single fuck he just ripped it off and theres paint chips and all and its bad.....😂
Question. I got my order from inshane design yesterday and it was only half my order. I understand they were super busy trying to fill orders. But how do I call them to get the other half of the order. It was only two black 12 inch tattered flag decals.
As a body man here’s a sanding tip. Never lift the edges of the sander up. You will create a low spot and make it appear you have a dent when it is painted. Keep the sander as flat on the body as possible
When you purchased this truck I wondered why and was not enthused at all. After hearing all the plans for it, I am soooo EXCITED to see the future Videos of this truck. I never should've doubted you!!!! It depends if you want it Military paint or brighter. I think that bright ralley blue would be Sweet Looking!
ToyBox Car Club thank you I just subbed you !!! And I plan on making some more videos soon. I was so busy with work for the past few months that I didn’t have time to put out the kind of videos I wanted
Thanks for the sub haha. I know I've seen that RS on your channel. I don't remember who's it was though. Will you be at the Carlisle Ford Nationals with it?
A lot of “pros” in here... people don’t realise this is a project something to learn on... not like your trying to paint a Ferrari lol. Love the vids and have fun :)
I've got a 99 Tahoe. Try rolling down the window and lifting up on the door when you close it. If it closes, look at the door latch assembly. Look at the driver side and compare it to the passenger side. You'll see the problem. Replace the door latch assembly and the door bushings. You're going to need help or just hold the door up with a jack stand while you take out the pins. Also, instead of unplugging the like, 3 wires, and fishing them through the cab, just have the door sag down to the ground.
Big lifts are expensive especially with tires and wheels, steering crossover, re gearing etc. plus labor if you need it done for you. The 14” lift I want for my 7.3 with 40” Toyos and 22” wheels + labor since I can’t do it myself Is like $10k WITHOUT re gearing the axels. Gotta pay to play though💯
Not sure about the later models Mike, but on my 82 C10 I had that same issue with the doors. Check the strikers/pin that the door latch grabs onto, mine were missing a piece of plastic that goes around it. Either get new strikers with the plastic or cheap out like me and just put a piece of pipe around it. I used 1/2 PEX on mine, works great to this day.
@@13christbane you could feel the difference in that 87 starved ass 305. Lol. It ran better with it flipped upside down. You are right about the noise too. I'd say maybe 4 and a half hp gain plus noise. Lol
for the molding adhesive you want a 'toffee wheel' or stripe remover wheel, its a wheel of rubber that attaches to a drill and rubs off the adhesive, smells like toffee when it gets hot
Rino line the complete truck I did it to my 03 crew cab and it worked out great .... this way you dont have to worry about rough paint or bondo or anything like that.... and its scratch proof ... great for off roading
You need a rubber eraser wheel for the end of a drill take the adhesive off. Look it up mike. Those eraser wheels are perfect for adhesive, door moldings, anything sticky.
Sorry but ... for me it is painful to watch ! me being a body man and watching someone doing bodywork, prep, but ...that's how you learn I guess Your just making more work for the. "other guys. Lol"
HELP! I can't decide on a color for the truck... the most commented color or the comment with the most likes is what I'll pick! UNLESS it's shit brown, hot pink, or some other horrible color you guys will troll me with.
Bright red
The obs maroon
Gun metal grey metallic
I love this content
Mystic teal its a fbody color from 1998 i belive
Paint shop is gonna be like
"Cool dude you sanded it for us that actually helps us a lot, we'll take care of it no problem"
*Mike leaves*
"Sand again, sand EVERYTHING again"
Aldo Lizalde my thoughts exactly lol
what he thinks is smooth is probably ripples. Especially with that sander. If the body shop is not taking that truck to metal go somewhere else
Damn took the words right out of my mouth 😂😂😂 he doesn't know. But just hopes he takes our advice and stops sanding
That's why I like this channel. I can tell when he's doing something wrong but respect him trying to learn and sending it.
😂🤣
Dark navy blue “dark ming metallic” is the gm paint name
with silver rally stripes
STARSHIPTROOP no
@@Squig-xi1fx no u
IF HE DOESNT DO THIS IMA BE SO MAD
I'm just here for the sanding comments. Was not disappointed 🤣🤣
Haha!
Funny I almost wrote the same comment
Bro love your show but please step back from the sander 🤣👊
I would agree.
Lol
Was thinking the same, the guys at the shop were probably too...lol
I work at a custom shop, and that's all I can think about...😂
Literally just digging holes
How not to sand down a truck for paint 101
he is a phckin idiot,
Lmfao
he didnt even take off the chrome fender flares
@@gonzo5912 yeah didnt even take off the fender flares
I know rite. not just the wheel trim, its most everything he does.
@@ChillingCap
This hurts my eyes to watch you sand. Pay someone, please
I couldn’t watch , the level of hack was to much
I thought it was just fine it gives him good content and if you're doing a cheap truck kind of thing it's much cheaper if you do that part yourself
@@infernotogo8133Togo when you send shit into paint you get it out. trying to save him money. I would charge someone more if they sanded for me. Maybe that truck didn't need to go to metal ( it does) after he sands it probably would. more work more money
I get that Mike wants to contribute to the work, but just to jump in with a $30 palm sander without even taking off the chrome wheel arch trims is maybe not the best idea
same, i'm a panel beater and painter, i was hiding behind the sofa, we really do hate it when the owner 'got it paint ready'
You sand like a certified Maaco painter. 😂
Maaco does better at sanding lol.
3m Eraser wheel would be your best friend for all that adhesive from the emblems and molding
The body shop is going to hack all that body filler out and start over with fresh metal anything other then that the rust will come back through your new paint job
Unless they have better filler. It's an older truck so they might not go crazy unless specified by Mike.
MAACO! It looks good to me!
They may use a more expensive filler, but it will not adhere propery. Mustang lab is correct, the RIGHT way to do it is down to bare metal, and work the metal to reduce the amount of filler
Boosted GTO my 98 has a bright red maaco job. Looks very good for the price
Came to say the same.
DON'T MAKE ME PUT A LIFT KIT ON THE BRUCE...…….
What's up Steve
Hell yea dude! So you'll have an engine in it by 2023 and then a new lift kit by 2030?
Let's be honest. Those are some pretty optimistic time goals.
Lmao THATS A SECOND DEGREE BURN STEVE
How does it feel to text a married women @ Steve you fucking idiot
I’m getting the feeling that your “full restoration” is going to be just a dirty old truck 😂
I'm afraid so
it's not even close to worthy for a resto. unless the body shop is going to work some miracles it's going to look like shit.
Mike G I have a feeling they are going to look at hm like he’s an idiot... then be like we can make this look ok for about a week. The if you want it done right we’ll have to cut all the rot out..
Sam Oh it should just be another off-road beater
Tomowenazin I’ve said it a thousand times this guy is a rich clueless wanna be cat guy. He doesn’t build a damn thing. I wouldn’t have my car where it is without a lot of help. However eat least the whole time I was out there turning wrenches and actually learning and working on the damn thing.
That chrome finder trim be like... “why are you sanding me???”
If you are taking it to a real shop you are making their job harder! Just stop now.
Lmao facts
maaco 300 paint job
Uploads video tomorrow “I plasti dipped my OBS Chevy truck in my driveway *Didn’t Go as Planned!*” and two months later “This is why you don’t do you’re own paint prep” 🤦🏻♂️
@@SurviventheOnslaught Even at Maaco they're going to charge a lot of money if Mike wants all that rust and body work done along with clear coated special color. I've had Maaco paint some new parts and damaged areas. They are not anywhere as cheap as people think (for a fully prepped clear coated paint job). But they are still a lot cheaper than a well known paint specialist shop. But some times you get what you paid for. I've had some bad experiences and good experiences with Maaco paint jobs.
DrunkinHippo can u subscribe to my channel plz
@Street Speed 717 take the fender Chrome pieces off
yes, please!
Yes
Crazy... I’m sitting here watching this vid sitting on the tailgate of my 95 k2500 looking at my old water pump laying on the ground 😂
I’ve had more fun watching the content on 90s GM shitbox trucks than I ever did the mcclarens or vettes
I second that!
If you love shit boxes, then you'd love my channel lol
Still no wheels and tires for the Jeep 😂💀
“This is like a... high grit...” I can feel Troy Sowers cringing. Lol
They flip the air cleaner for a little more flow, but it also gives it more intake noise, which just sounds better mostly.
Desert tan for sure. Green was done on the c4
That poor Quad is begging to go for a Rip Mike..✊🏻
Brian Mitsch can u subscribe to my channel
Hurt me when you took off that metal band off the tailgate 😒
I'm glad this content is being banged out quickly! Keep it up Mike!
100 bucks says it gets painted Chevy navy and this is a build to what he wishes he coulda done to the truck he had when he started the channel
1668Dave Exactly what I was thinking to
Go the original color of your first truck on your channel!!
AM Vlogs yes yes yes
Quite the project. Thanks for sharing guys!
They got RUclips videos to show you how to use a sander.
Turning the air filter top like that makes it sound better when you send it.
Mike.... you gotta cut out the rust and do it right. It adds cost, but it's better to it right than do it twice.
AGREDD FRIEND
Body work is a damn gift brother. I did the bodywork on my 66 mustang, sand, Bondo, sand, Bondo X 20 more times, and after paint definitely imperfections here and there. My big problem was eventually down the road the rust pushed through and lifted parts of the paint near my door seals. It's a great learning experience but once the pros can take over it will be 👌
Back in 87 Chevrolet introduced their new 1988 models. My roommate at the time bought an extended cab long bed. That sucker was like a stretch limo! Rode so smooth & handled well at 90 MPH on the freeway. This was in Texas- away from the Gulf & yet the truck was about a year old & GM replaced the roof because it was already rusting out. I'm sure they corrected that problem by 93. Can't wait to see the finished product.
I think that ole Big10 Chevy orange style would look amazing behind the lift
you should get the eraser thing for your drill that ppl use to get rid of adhesive
Its called a rubber eraser wheel, and it works wonders for decals/vinyl/and adhesive
Yeah, I just used the one that's like a third of the price of the 3M brand one and it worked great. That was about a week ago and I did fuck up on tearing the moulding off and now there's big chips of paint gone on my door
haha yea i would use one for my truck i have a 98 z71 and the that had it before me ripped off the stuff and didnt give a single fuck he just ripped it off and theres paint chips and all and its bad.....😂
Lmao I was crying laughing so hard when I saw how clueless you where when sanding but it's pretty dope that your putting yourself out there man
I really love these videos! Removing all the hideous stuff from the trucks, especially nice free mods like that are really satisfying 😂
Mike U already did a budget OBS build why not go full beans and restore it all the way and keep it for a little while
that truck is not at all worthy of a restore it's not even worthy of a budget paint job
Mike G still would be cool and different to see on the channel we all know he has the money to do it
Gotta be one of the best truck builders on you tube 🤙🤙
Dylan Burgess agreed
That’s a negative
Or nah.
Except he isn't a truck builder? He is a truck owner. He hasn't built anything
Are you serious..
Mike, you need to replace the door pins on the door, it will close normally then
I don’t usually laugh out loud during the vlog but the cut from Andy saying “nope” to you grinding under the truck had me rollin
Ive been following this channel since mike got a 6 inch lift for the green obs
Same
Question. I got my order from inshane design yesterday and it was only half my order. I understand they were super busy trying to fill orders. But how do I call them to get the other half of the order. It was only two black 12 inch tattered flag decals.
duke c you just pick up the phone and dial the number on their website, phones are pretty easy nowadays
@@Stax62 didn't see it, but thanks
He has a 10in cognito his wife must be a very happy women
Actually I thing that's what (in) Shane slipped (in) Mike at the glory hole...
2 Andy’s and 2 Shane’s... what a time to be alive
super cool content lately great job
You could paint it nardo grey like you planed on doing to the dmax at one point.
Everyone on RUclips is painting everything nardo grey these days. Not very exciting after seeing it done 10 times already
A nardo grey old ass truck? Interesting....
Some type of budget ........
Spends all of your money lol
Can’t wait to see the lift on!
"You had to pee, oh I'm sorry"🤣🤣🤣 you had me rollin
You should do the factory light blue on the truck
Had a missed call from a 717 number today I thought no way,called it back and sure as shit It was telemarketer
Lol
Get a 3m eraser wheel for the side moulding residue and remove the chrome wheel arches!!!
I have a 94 suburban and a 6in lift with 35s works good. Also they changed to the new style mirrors as well in 94
Paint it the blue from the new raptord
Which blue... There's two
Love the budget builds!
Don’t you have a bmw that needs paint? Lol
V tuned you have got to do a obs build
@@articat568 finally painted it last week
@@that99obschevy91 yea one day
@@Vtuned hell yea bro I appreciate the follow up,
That’s dedication it’s been a whole year lol
So cool to see that many trucks in the yard 😂
These 90 model chevy trucks look soooo much better without that trim. Streamlined! Can’t wait to see the progress on this truck
Paint the OBS shit brown. Great idea👍🏻
Dumb question probably heard it before but what does OBS mean thanks
Old body style
Love the throaty sound of the 5.7 V8 on those older Chevy trucks.
I got an 88 k2500, with a manual trans that I'm bringing back to life. Flipping the lid does help a little.
Do a military green wrap or make a flag wrap, having the stripes down the side of the truck. A really cool camo wrap would look great also!😁
The rough country lift is made in the good OL USA so that's a plus in my book
There shitty though.
Yup, junk. Been there before with a 1998 Silverado. Whole truck is kind of a shity baseline honestly. Much better off with 99+
As a body man here’s a sanding tip. Never lift the edges of the sander up. You will create a low spot and make it appear you have a dent when it is painted. Keep the sander as flat on the body as possible
When you purchased this truck I wondered why and was not enthused at all. After hearing all the plans for it, I am soooo EXCITED to see the future Videos of this truck. I never should've doubted you!!!! It depends if you want it Military paint or brighter. I think that bright ralley blue would be Sweet Looking!
Mike: "Can you tune a 1993 Chevy Silverado"
Andy: (without hesitation) NOPE. 😐
😯🤐
Rubber wheel on a drill will take the adhesive of in a hurry.
Prepped it myself! “SANDS DOWN TO METAL” Ready for paint 😂
I have the rough country 6" on my 00 Yukon Denali, running a set of 35x12.50/17, no issues at all, Benn running it for over 2yrs
Rough country is made in Tennessee paint it with bed liner
That truck was a great find🔥👍😎. I bet your neighbors are curious why there’s always so many vehicles at your house 😂😂
What happened to your videos? Sorta enjoyed the smaller RUclipsr vibe.
ToyBox Car Club thank you I just subbed you !!! And I plan on making some more videos soon. I was so busy with work for the past few months that I didn’t have time to put out the kind of videos I wanted
Thanks for the sub haha. I know I've seen that RS on your channel. I don't remember who's it was though. Will you be at the Carlisle Ford Nationals with it?
ToyBox Car Club it is @Get Famous Or Die Trying’s. RS, I’m not sure if he will bring it. Do you live in the area too
I'm from below Pittsburgh. Right at seven springs
A lot of “pros” in here... people don’t realise this is a project something to learn on... not like your trying to paint a Ferrari lol. Love the vids and have fun :)
Been waiting all day for a new video.
"I'm concerned, a not professional did this work"
*has no clue what he's doing* lol
Mike just let the professionals do the paint work, you are just making it harder for them! Lmao
You killed it man !
I've got a 99 Tahoe. Try rolling down the window and lifting up on the door when you close it. If it closes, look at the door latch assembly. Look at the driver side and compare it to the passenger side. You'll see the problem. Replace the door latch assembly and the door bushings. You're going to need help or just hold the door up with a jack stand while you take out the pins. Also, instead of unplugging the like, 3 wires, and fishing them through the cab, just have the door sag down to the ground.
Can you tune a 93 chevy Silverado-
Andy : NOPE
😂😂😂😂😂😂
NOTIFICATION GANG!!
That color when it's new actaully looks amazing
I like the tow mirror look better than the small mirrors. Especially since it's gonna be huge
CHARCOAL GREY!!!
Big lifts are expensive especially with tires and wheels, steering crossover, re gearing etc. plus labor if you need it done for you. The 14” lift I want for my 7.3 with 40” Toyos and 22” wheels + labor since I can’t do it myself Is like $10k WITHOUT re gearing the axels. Gotta pay to play though💯
Blazer is gonna look sick with that 6” lift man🔥
Not sure about the later models Mike, but on my 82 C10 I had that same issue with the doors. Check the strikers/pin that the door latch grabs onto, mine were missing a piece of plastic that goes around it. Either get new strikers with the plastic or cheap out like me and just put a piece of pipe around it. I used 1/2 PEX on mine, works great to this day.
Flipping the intake lid does work! Did that to my old quadrojet 305 IROC-Z and it really did pick up some power and seemed more responsive! 😁👌
like 3hp and some noise
@@13christbane you could feel the difference in that 87 starved ass 305. Lol. It ran better with it flipped upside down. You are right about the noise too. I'd say maybe 4 and a half hp gain plus noise. Lol
Saw the picture on Instagram and had to come watch the video!!
You gotta love the 360p
Pure quality
stop bitching about it. it was just uploaded. it takes time before it’s 1080p
That's what happens when you first upload a youtube video. After a duration of time the real quality will be available.
Jay I’m not bitching I’m just laughing
I don’t care about the quality I like the content
T Stack I know just saying
for the molding adhesive you want a 'toffee wheel' or stripe remover wheel, its a wheel of rubber that attaches to a drill and rubs off the adhesive, smells like toffee when it gets hot
I've got a 93 K2500 Silverado that same top color. The bottom is tan. 33x14 boggers with a little trimming and cranking the torsion bars.
Chrome American forces or hostiles pleaseeeeee
WEAR A RESPIRATOR WHEN U SAND PLZZZZZZZ
Rino line the complete truck I did it to my 03 crew cab and it worked out great .... this way you dont have to worry about rough paint or bondo or anything like that.... and its scratch proof ... great for off roading
You need a rubber eraser wheel for the end of a drill take the adhesive off. Look it up mike. Those eraser wheels are perfect for adhesive, door moldings, anything sticky.
He proteccc....
He attacccc...
But most importantly......
HE LIFT THAT!!!
Carter Walton I actually chuckled at this not gonna lie
As long as she gets Black Wheels. Awesome video though. Gonna be sick 😊
Your motivating me to restore my old pick up!
Pro tip: if the door handle is loose and you need to slam the door roll the window down and grab it by the door frame to slam shut. ✊🏻
Sorry but ... for me it is painful to watch !
me being a body man and watching someone doing bodywork, prep,
but ...that's how you learn I guess
Your just making more work for the. "other guys. Lol"
What would you do ?
Paint it the same as the dirtymaxxxx
Can’t wait to see this build just recently got me a 94 z71
Please do army green with like a black bedliner around the bottom part (where the silver is)
You should paint the truck nardo grey.