How To Protect Appliances From High Voltage | Over Voltage Protector

Поделиться
HTML-код
  • Опубликовано: 30 сен 2024
  • #highvoltage #varistor #mov #overvoltage #surgeprotector #metaloxidevaristor

Комментарии • 139

  • @sushantkadam3
    @sushantkadam3 Год назад +4

    Sir your video was so knowledgeable to me i understood what is actual use of MOV we need teacher like you 😊

  • @azam1955
    @azam1955 2 года назад +3

    Nice review,thanks but you should also inform in case there is short circuit after the fuse and about fuse rating etc.

  • @faisalarshid
    @faisalarshid Год назад +2

    Very good information for learner's or beginners,
    Great work.

  • @JuniorGois-xk6sj
    @JuniorGois-xk6sj 29 дней назад

    Parabéns pelo vídeo ótima técnica

  • @hadicutiepie3583
    @hadicutiepie3583 2 года назад +3

    Great idea, thanks a lot

  • @osckodam
    @osckodam Год назад +1

    Would u make with English subtitle!

  • @irshadali398
    @irshadali398 2 месяца назад

    Aesi koi device he kya ziada voltage a rahe ho or aage 220 hi pass kar raha ho home aplince ki taraf

  • @idreesali4825
    @idreesali4825 2 месяца назад

    یہ تو آپ نے بتایا ہی نہیں کہ D471K کتنے وولٹ پر فیوز کو برسٹ کرے گا ؟ چونکہ D471 تو 470 وولٹ کا ہوتا ہے اور اگر ایک سیکنڈ کے لیئے بھی 280 وولٹ سے زیادہ وولٹ آگے چلے گئے تو ویریسٹر تو وہیں رہے گا آگے سرکٹ کا کام تمام ہو جائے گا اسکے لئیے D241 یا D271 کیسا رہے گا ؟

    • @TARIQLAB
      @TARIQLAB  2 месяца назад

      Jitni bhi bari companies hain wo yehi use karti hain,
      Jo volts ham measure karty hain 220v ye RMS hain jis ke peak volts 308 hain , jin ko multimeter measure nahi karty. Aor jab ap 220 ko dc karty hain tu wo 320-330v tak hoty hain tu ye kahan se aye.

  • @ranjithcheruvathoor3921
    @ranjithcheruvathoor3921 3 месяца назад

    Always use three-pin plug.

  • @ferdm9646
    @ferdm9646 3 месяца назад

    3 pin will be ideal for this kind of setup. You haven't tested it so you can't tell wheadef it's working or not

    • @TARIQLAB
      @TARIQLAB  3 месяца назад

      All appliances equipped with this spec MOV, sure it works, i don't have power line above 240V

  • @birsingh5388
    @birsingh5388 2 года назад +1

    If we only use fuse, will that not work properly?

    • @TARIQLAB
      @TARIQLAB  2 года назад

      High Voltage pass through fuse

  • @repairingmyhobby
    @repairingmyhobby 4 месяца назад

    apne varistor glat lgaya hai varistor ki dono legs plug k screw mein lgani hoti hai fuse se phelay nahi lagay gi..

    • @TARIQLAB
      @TARIQLAB  4 месяца назад +1

      Phir jab ye short hoga tu fuse kesy jaky ga, wiring kharab ho sakti hai, ya jab bhi lagta hai fuse je baad lagta hai

  • @zarzarel1910
    @zarzarel1910 Год назад +1

    But, for example, a Led TV or a switching voltage source (for PC) do not have protections against voltage peaks? And yet, they also fail... but the fuse board for lighting and sockets in the house, what are they still useful? isn't it, too many protections "damage" the electrical circuits in the house? thank you for your simple and easy-to-apply explanations... my respect for you

    • @TARIQLAB
      @TARIQLAB  Год назад +1

      Alll good brands use varistors inside the LED tv or computer power supply

    • @zelina364
      @zelina364 11 месяцев назад

      @@TARIQLAB then we dont need to add an alternative MOV?

  • @tonyorchid
    @tonyorchid Год назад

    if my 230v 1500W vacuum cleaner is MAKING the dangerous spike voltage , what should i connect inside t its plug ? i want to dissipitate spike at the source. and the fuse is on load side or line input side ? kindly reply

  • @adwaitkumar
    @adwaitkumar 2 месяца назад

    Tasalli liye dobaara poocha hai.

  • @weedkvlogs7178
    @weedkvlogs7178 9 месяцев назад

    Sir I want this varistor for my lab equipment usky circuit p jal gaya h ye
    please apky pas available hy ya iska koi alternate bta den
    JVR14N431K

  • @rineshboilla1608
    @rineshboilla1608 24 дня назад

    We can use this circuit for ac 230 test lamp also

    • @TARIQLAB
      @TARIQLAB  24 дня назад

      Lamp will burn on high voltag passing high volts spike to the load

  • @techideas6772
    @techideas6772 Год назад +1

    You should connect thermistor after the fuse because when thermistor is gonna overload, fuse will blow.

    • @ProGamer-pr9rw
      @ProGamer-pr9rw Год назад

      How?

    • @ProGamer-pr9rw
      @ProGamer-pr9rw Год назад

      ruclips.net/video/_2GteAr7IpE/видео.html

    • @techideas6772
      @techideas6772 Год назад

      @@ProGamer-pr9rw simply connect thermistor to the load side after the fuse.

    • @avp.69
      @avp.69 4 месяца назад +1

      That's what he did.

  • @kabandajamir9844
    @kabandajamir9844 Год назад +1

    So nice thanks

  • @patricknmd7383
    @patricknmd7383 8 месяцев назад

    When I was young, i made this protect but I took 3 Mov. Beetween phase et neutre, phase et terre et phase et terre with a fuse sur la phase.

  • @adwaitkumar
    @adwaitkumar 2 месяца назад

    220 v ke liye 14D471k mov jo 300 v tak ye short nahi hoga .
    Kya tv ya computer ye 240 v ke upar jhel sakega Tariq bhai.
    250 v ko mov jiska no. 14D391K hai running voltage 250v hai kya ye use kar sakte hai. Bataye

    • @TARIQLAB
      @TARIQLAB  2 месяца назад

      250v allowable voltage hain laiken peak voltage main spikes hoty hain jo 250v ko cross kar dety hain, sab companies ziyada tar 14d471k hi use karti hain,

    • @adwaitkumar
      @adwaitkumar 2 месяца назад

      @@TARIQLAB ok 👍

  • @chemicalengineer5626
    @chemicalengineer5626 Год назад

    sir mere pass battery charger hai 20 ampere ka jo k mostly 240 volt pr jl jata hai uskeliay me ye plug bnana chahta hun to uske liay fuse kitne ampere ka lgega or varistor/MOV code bhi btaden suitable.
    iske ilawa mere 2 questions hai
    1. MOV me positive negative legs ka chakkar to nhi hai?
    2. MOV k jlne se fire to nhi lgegi?

  • @JV-nt9bp
    @JV-nt9bp 2 года назад +2

    Please add the types and value of the resistors in the discription . 🙏🏻

  • @ronakparmar6717
    @ronakparmar6717 Год назад

    Bahoot achha par fuse ki velu Ohm Watt ye kaise select kare ye bhee batadete to complete video hota. Jo ki ye main baat hai

  • @sahityabodra1412
    @sahityabodra1412 Месяц назад +1

    We can use zov 14d511k

    • @TARIQLAB
      @TARIQLAB  Месяц назад +1

      Allowable voltage 320V

    • @sahityabodra1412
      @sahityabodra1412 Месяц назад +1

      @@TARIQLAB we can use Or not...?

    • @TARIQLAB
      @TARIQLAB  Месяц назад +1

      I think 14D471k is better but u can use 14D511k

    • @sahityabodra1412
      @sahityabodra1412 Месяц назад +2

      @@TARIQLAB ok thank uu❤

  • @adwaitkumar
    @adwaitkumar 2 месяца назад

    Tariq bhai kya hum 14D391k bhi use kar sakte hai jiska Acrms 250 hai ampere capacity 50 hai

    • @TARIQLAB
      @TARIQLAB  2 месяца назад

      Kar sakty hain laiken peak volts 320v hona chahiye, datasheet check kar len

    • @adwaitkumar
      @adwaitkumar 2 месяца назад

      @TARIQLAB ok thank you

  • @adwaitkumar
    @adwaitkumar 2 месяца назад

    Tariq bhai kya 14D471k aur 14D471 ek hi hai ?
    Ye kine ampere tak load utha sakta hai.
    Jaise celling fan, led tv,refrigerator har ek ka load alag hota hai amps alak lete hai.

    • @TARIQLAB
      @TARIQLAB  2 месяца назад

      Jee aik hi hai, is ne load nahi uthana hota dono wire pe lagta hai aor jab high voltage aty hain tu ye short ho jata hai aor is se pehly fuse jal jata hai ya breaker trip ho jata hai ,ghar ki kisi bhi cheez ke saath laga sakty hai

    • @adwaitkumar
      @adwaitkumar 2 месяца назад +1

      Thank you🎉

  • @ipingbinladen5317
    @ipingbinladen5317 Год назад +1

    Ok

  • @nitinprabhulkar5792
    @nitinprabhulkar5792 Год назад

    Can we connect in dc power supply.

  • @JV-nt9bp
    @JV-nt9bp 2 года назад +1

    Genius 👏🏻😊

  • @rajkhumar001
    @rajkhumar001 Год назад

    Sir your video is nice sir. Am AC technician. In lg single door inverter fridge mov value written on this is 20d681s. But this part is not available in my area. So is there any alternative value can i add?

    • @TARIQLAB
      @TARIQLAB  Год назад

      That is 680v , check voltage on varistor if 220 then use 20d471

  • @rolexraheem9860
    @rolexraheem9860 7 месяцев назад

    832👍
    Good explaining👌

  • @BittuSingh-ul9dh
    @BittuSingh-ul9dh 9 месяцев назад

    kitne voltage per fuse short ho jaiyega

  • @sanisafdar6362
    @sanisafdar6362 8 месяцев назад

    Can we used mov on DC 12v ? And can it's protect 12v DC over current like 14v 15v etc

    • @TARIQLAB
      @TARIQLAB  8 месяцев назад +1

      Yes, we can use varistor that has dc clamping volt 14V

  • @sriravikiranr4788
    @sriravikiranr4788 6 месяцев назад

    Z👏👏👏👏

  • @jalalakbar360
    @jalalakbar360 8 месяцев назад

    can i use variastor of 471,1kv plz reply

  • @safasdaasdasgfafs
    @safasdaasdasgfafs 9 месяцев назад

    Can we connect varistor directly without fuse?

    • @TARIQLAB
      @TARIQLAB  9 месяцев назад +1

      Yes, but fuse should be according to the load in DB

  • @aabidsofi19
    @aabidsofi19 Год назад +1

    is it better to send the surge to neutral or ground wire

  • @xtesster
    @xtesster Год назад

    how the varistor protect the circuit from over voltage? in case if u had an over voltage, the varistor will burn but the voltage still be able to flow to the circuit

    • @TARIQLAB
      @TARIQLAB  Год назад +1

      If load consumption is 5A, we can use 10 or 20A varistor, when varistor shorts , 5A fuse easily burn that is before varistor

  • @souravbhattacharyya3392
    @souravbhattacharyya3392 8 месяцев назад

    Cartridge fuse rating?

  • @mahidelectronics
    @mahidelectronics 10 месяцев назад

    Very Helpful video thank you so much

    • @TARIQLAB
      @TARIQLAB  10 месяцев назад

      So nice of you

  • @zelina364
    @zelina364 11 месяцев назад

    Can i use any specification number of mov ?

    • @TARIQLAB
      @TARIQLAB  11 месяцев назад

      No . According to the voltage

  • @Ahmad_499
    @Ahmad_499 2 года назад

    1.5 ampare charger k switch me kitny ampare ka fuse or varistor lagy ga

    • @TARIQLAB
      @TARIQLAB  2 года назад

      Varistor ye hi fuse 2amp

  • @motalibaluyodan8616
    @motalibaluyodan8616 Год назад

    .thanks a lot, what is the rating of fuse?

  • @jimmyjayant8072
    @jimmyjayant8072 Год назад

    Two questions:-
    1. Is it the aluminium wire that must be connected at both ends of a glass fuse? Actually, I connect both ends of a fuse with soldering wire, it connects with little trial and error.
    2. I did the same with a 3 pin plug of Girish company with a 07d471k mov and 10ampere fuse. Upon testing, the mov did not explode even at 300 volts ac. Why?

    • @TARIQLAB
      @TARIQLAB  Год назад

      7d471 is for 220/240v appliances. It should be in parallel with live & neutral

    • @electrical8457
      @electrical8457 Год назад

      Sir smps me kitna number ka mov lagana chahiye please

  • @fahadshah8086
    @fahadshah8086 Год назад

    Bhai very nice per ye jo ajkel voltage protactor a rhy ha ye to 300 sy zeyada voltage sh nai paty or jal jaty ha abi main nay tomzen ka lia tha 3500 ka 1 month chla hmary voltage rat ko boht zeyada ho jaty ha uski range 300 tak the bus to kiya hum usk sath ye lga skty ha or jha voltage high rhty 250 say 270 wha konsa Mov use krain ye bta dain thanks

    • @TARIQLAB
      @TARIQLAB  Год назад +1

      Ap 10D391K use karo ye 250 ka hai

  • @nazkanwalkhan93
    @nazkanwalkhan93 11 месяцев назад

    السلام علیکم میرے پیارے بھائی جان
    یہ تو اپ نے اس ویڈیو میں بتایا ہی نہیں کہ فیوز کتنے ایمپائر کا ہو

    • @TARIQLAB
      @TARIQLAB  11 месяцев назад

      Load se half amp ziyada hona chahiye

  • @asadmochi5845
    @asadmochi5845 2 года назад

    Sir aap koe b chiz bana te ho bohot kam ki bana te ho

  • @KishanLal-we9rv
    @KishanLal-we9rv Год назад

    Guru samajh mein a Gaya lekin shoes ka kuchh number nahin bataen iske bare mein to kuchh bolna tha

    • @TARIQLAB
      @TARIQLAB  Год назад

      Shoe ka kiya hai koi bhi laga len, space na ho tu socket main laga len

  • @mrtechie6810
    @mrtechie6810 Год назад

    Wait till it catches fire!
    You should put a high quality surge protector at the electric panel.

    • @TARIQLAB
      @TARIQLAB  Год назад

      Fuse for what ?

    • @mrtechie6810
      @mrtechie6810 Год назад

      @@TARIQLAB MOVs can overheat and fail short. Boom!

  • @faisalarshid
    @faisalarshid Год назад

    Can be use for water pumps 9 to
    10 ampere

  • @avinashsharma8056
    @avinashsharma8056 Год назад

    I have installed mov in parallel of my electric device what after mov burned will it turn the house MCB trip or how do I know that I should replace mov please reply.

    • @TARIQLAB
      @TARIQLAB  Год назад

      Install a fuse or breaker before MOV,

    • @avinashsharma8056
      @avinashsharma8056 Год назад

      @@TARIQLAB
      I have already installed but breaker does not reacted although mov are burned totally.

    • @TARIQLAB
      @TARIQLAB  Год назад

      MOV Amp should be more than breaker. Ur load ?

  • @akshayviruss
    @akshayviruss Год назад

    Can we use it for refrigerator or AC?

    • @TARIQLAB
      @TARIQLAB  Год назад

      For refrigerator ok, but for ac use higher value number starts 20D

  • @digitalmouzam
    @digitalmouzam 5 месяцев назад

    Assalam o Alaikum! Brother fuse ka Ni Btaya Kitna Amp Ka Use Karna Wo B Bta Deta And Aik Question Yeh Mov Fuse Extension Board Ghar Mein Use Hota Switch Socket Wala Us Ka Andar Connection Kar Sakta Han Kiya Ya Only Shoe Mein Use Karna Yeh Dono Ko Dosra Yeh Pochna tha Yeh Only High Voltage Ka liya Han Ya Low Voltage Pa b Work Krta

    • @TARIQLAB
      @TARIQLAB  5 месяцев назад +1

      Fuse load ke mutabiq lagana hai, kahen bhi laga sakty hain fuse ya breaker ke baad

    • @digitalmouzam
      @digitalmouzam 5 месяцев назад

      @@TARIQLAB computer lcd chalani han mjhy brother kitna amp ka fuse use karna bata deta and yeh low voltage pa b kam kra ga bta dena

    • @TARIQLAB
      @TARIQLAB  5 месяцев назад +1

      Fuse 3A , sab ke voltage different hoty hain, 220~240v ke liye 10D471 best hai

    • @digitalmouzam
      @digitalmouzam 5 месяцев назад

      @@TARIQLAB bht shukariya apka feedback ka liya mjy bs yeh confirm karna tha yeh mov fuse ap na video me btaya bana kar shoe mein yeh high voltage pa karta ya low voltage pa b kam kara ga bs yeh cheez clear karni thi mjhy

    • @TARIQLAB
      @TARIQLAB  5 месяцев назад +1

      Only high voltage pe

  • @ArifKhan-mn9gx
    @ArifKhan-mn9gx Год назад

    Kya isko mcb ke baad main lne me laga skte hai..?

  • @tourlover3722
    @tourlover3722 7 месяцев назад

    sir MOV ki rating kya hai?

  • @shaiksubhani3915
    @shaiksubhani3915 10 месяцев назад

    Washing machine ke liye bhi 14d471k use hoga ya 10d ?

    • @TARIQLAB
      @TARIQLAB  10 месяцев назад

      7 or 10d

    • @shaiksubhani3915
      @shaiksubhani3915 9 месяцев назад

      washing machine and dishwasher usually 16amp socket rehta hai, jaisa aapne bataya 10d use karsakte hai kya and what about fuse rating 2amp or 16amp fuse ?@@TARIQLAB

  • @madanmohanbhatia4478
    @madanmohanbhatia4478 Год назад

    Thanks

  • @govind3170
    @govind3170 Год назад

    Main line main lagaye kya

  • @LaxmanMlaxman-oh7br
    @LaxmanMlaxman-oh7br 8 месяцев назад

    Thanks anna

  • @farukhagwan8577
    @farukhagwan8577 Год назад

    Sir 20 d431 lga sakte hai kiya

    • @TARIQLAB
      @TARIQLAB  Год назад

      Ye 275v ka hai, 220v ke liye 300v ka hi lagta hai

    • @farukhagwan8577
      @farukhagwan8577 Год назад

      Sir agar 300volt ke niche volt aaye to koi Vidhut upkaran kharab to Nhi hoga

  • @libinfrancis2935
    @libinfrancis2935 Год назад

    Fuse ambir

  • @asadmochi5845
    @asadmochi5845 2 года назад

    Agar ye chiz pahle banate to aaj mere computer ki power supply blast na hoti

    • @TARIQLAB
      @TARIQLAB  2 года назад

      Us main bhi varistor aor fuse hi kharab howa hoga, agar varistor howa tu

    • @asadmochi5845
      @asadmochi5845 2 года назад

      @@TARIQLAB sir mein ne check ki jal ker raakh ho gayi thi under se puri

    • @TARIQLAB
      @TARIQLAB  2 года назад

      Phir kiya ho sakta hai

    • @Ahmad_499
      @Ahmad_499 2 года назад

      Charger k switch me kitny ampare ka fuse or mov lagy ga

  • @babukartik6124
    @babukartik6124 Год назад

    Kai baar ceiling fan jal jaataa haai. Kyaa iss se protection mil saktaa haai?

    • @TARIQLAB
      @TARIQLAB  Год назад

      Over voltage se jalta hai tu zaroor bach jaye ga

    • @babukartik6124
      @babukartik6124 Год назад

      @@TARIQLAB reply ke liye dhanyawad. Aur kis kaaran se jal saktaa haai? Meraa, ek hi point pe tin baar fan jal chukaa haai. Kutch din chaltaa haai phir jal jaataa haai. Ho saktaa haai point me fault haai. Kutchh bhi ho over voltage hi to main kaaran hotaa hogaa?

    • @TARIQLAB
      @TARIQLAB  Год назад

      Voltage check karny chahiye, aor fan repair kareaty hai ya change kary hai

    • @babukartik6124
      @babukartik6124 Год назад

      @@TARIQLABAap kaa response ke liye dhanyawad. jis point me fans jal rahaa thaa, usko chhodke dusra ek point banayaa. Ek fan repair karke chalaa rahaa hun. Dusraa fan abhi winding kiyaa nehin. Wo defective point, abhi tak check nehin kiyaa. Karnaa haai, time nikaal ke. Aap ne bolaa voltage check karne ke liye. Lekin fan to Kutch din chalne ke baad jaltaa haai. Voltage check karne se fault keise milegaa?

  • @V98000
    @V98000 Год назад +1

    Sir, ghar ke main line par mcb ke baad aur rccb se pehle lagana hai.....summers me voltage 220~240V rehta hai but winters me 260~265V tak chale jaate hain....please bataiye kitne diameter aur kitne volt ka lagaya jaaye, uska number bhi bataiye please

  • @ali619786
    @ali619786 Год назад

    Aapne kitne watt ka fuse kis appliance/load ke liye use karna chahiye, agar wo bhi explain kiya hota to video poora ho jaata.
    Comments me batane ke bajaye, ho sake to ek video fuse wattage calculation ke saath banaiyyega.
    Aur agar possible ho to kitne volt ka mov use karna chahiye usually wo bhi bataiyega. Ghar ke aam electronic devices ke liye. Jaise mujhe koi idea nahi ki mere ghar ke electronic devices kitna high voltage jhel sakte hai, aur kitne voltage ke baad kharab ho jayenge. 275 volt ya 300 volt mov use karna hai etc
    Mov aur fuse ki value kitni honi chahiye ye mujhe clear nahi hua. Baaki working concept aapne perfectly samjhaya hai, ek baar me samajh me aa gaya. Very good explanation...👍

  • @mahendrasuna7172
    @mahendrasuna7172 6 месяцев назад

    Bahut badhia knowledge hai