Just tried to unlock HYQ14AHC today - no luck. VVDI tool says "Unlock OK" , but LED on smart key does not blink as it should, and key can not be programmed to the car. Not sure what might be the reason. Battery in smart key is OK. May be someone played game and sold used AHK key in AHC housing (customer bought used key online).
Сергей Канаццкий I have had this happen too. Unlock multiple times until you see the light blink. If this does not work then press a button (the light will blink) and hit unlock. The light should blink again during unlock.
Well, the customer is gone already with his key :), but thanks for reply, I'll keep that in mind. I've tried like 10 times, but didn't try to push button in process. Also, what is the best way to check if key is unlocked? I have Toyota key, VVDI doesn't show much information about it (same info for locked or unlocked key). Tango shows quite few pages unlocked though, I guess that means something (I've unlocked this key right after I've got it). BTW when I'm trying to "unlock" again this unlocked key VVDI Also shows "Unlock OK" but LED also doesn't flash anymore. Is this normal?
Best way to check if key is unlocked is to try to program it to the vehicle! Other than that, seems like you might be into something with the Tango. Some keys will flash without help and some don't like to without button presses. Alternatively, you can lay it face up on top of the coil on the vvdi
Bought fob off eBay for experiments :) You were correct! VVDI shows "Unlock OK" almost every time I clicked "unlock", but it took me more than 10 tries before finally LED on smart key flashed! Now I need to check if it actually can be programmed to a car :) Thanks again!
Сергей Канаццкий I have been told that ikeyclone works, also possibly mk3. The people who made tlsprog are working on new software to enable AHC and AHK unlocking. Right now it only works on Toyota/Lexus keys
Which key tool are you using? And did the light blink on the board? You must have a good battery and the light must blink. Just spam the unlock button until the light blinks a few times. Also make sure you don't actually have an HYQ14AHK, which looks identical.
Just tried to unlock HYQ14AHC today - no luck. VVDI tool says "Unlock OK" , but LED on smart key does not blink as it should, and key can not be programmed to the car. Not sure what might be the reason. Battery in smart key is OK. May be someone played game and sold used AHK key in AHC housing (customer bought used key online).
Сергей Канаццкий I have had this happen too. Unlock multiple times until you see the light blink. If this does not work then press a button (the light will blink) and hit unlock. The light should blink again during unlock.
Well, the customer is gone already with his key :), but thanks for
reply, I'll keep that in mind. I've tried like 10 times, but didn't try
to push button in process. Also, what is the best way to check if key is
unlocked? I have Toyota key, VVDI doesn't show much information about
it (same info for locked or unlocked key). Tango shows quite few pages
unlocked though, I guess that means something (I've unlocked this key
right after I've got it). BTW when I'm trying to "unlock" again this
unlocked key VVDI Also shows "Unlock OK" but LED also doesn't flash
anymore. Is this normal?
Best way to check if key is unlocked is to try to program it to the vehicle! Other than that, seems like you might be into something with the Tango. Some keys will flash without help and some don't like to without button presses. Alternatively, you can lay it face up on top of the coil on the vvdi
Thanks! Will continue learning :)
Bought fob off eBay for experiments :) You were correct! VVDI shows "Unlock OK" almost every time I clicked "unlock", but it took me more than 10 tries before finally LED on smart key flashed! Now I need to check if it actually can be programmed to a car :) Thanks again!
Thanks!
Сергей Канаццкий you're welcome! Note that HYQ14AHK looks same in every way on the outside but cannot be unlocked this way.
Any other known way to unlock AHK?
Сергей Канаццкий I have been told that ikeyclone works, also possibly mk3. The people who made tlsprog are working on new software to enable AHC and AHK unlocking. Right now it only works on Toyota/Lexus keys
Thanks for info.
Tried this did not work
Which key tool are you using? And did the light blink on the board? You must have a good battery and the light must blink. Just spam the unlock button until the light blinks a few times. Also make sure you don't actually have an HYQ14AHK, which looks identical.