John Deere 335 E Zero-Turn Belt Removal And Install GX25628
HTML-код
- Опубликовано: 6 сен 2024
- It might not be the quickest, easiest or the right way to install this belt, but this how I did it. I bet it would have been easier just cut the belt off.
Lesson learn: Make sure you have the correct belt for your mower, don’t just look at the deck size on the package.
John Deere playlist
• John Deere
Subscribe to my RUclips channel
subscribe.chadb...
Subscribe to my RUclips channel
subscribe.chadbray.com
I wish you explained what you were doing as you went! If you had, it could have been helpful to my doing it for the first time!
Great instructional video! camera is in one position only can’t see a damn thing he is doing from behind.
If you do not explain what you are doing or the camera is not where I can see then what’s the point
Thank you for this video. It sure helped me on my Z335E deck belt change.
Thank again brother!
Welcome
Wish I saw the tension doing and placement. That's the only problem I have never paid attention to the Placement before it broke
Would be better if you could see what was being done,
You have to remove the spring so the pulley bolt can be removed. You can then replace the belt. You only have to remove that one pulley.
I believe I only removed one pulley, I did’t remove the spring, I used a ratchet to loosen the tension on the spring.
I have to rewatch the video to remember what I did..
@@ChadBray It's ok the information I provided will help wonders!
You don’t remove the spring
I guess I did remove two pulleys
How does it go around the 2 pulling in the middle
Can't see anything and nothing was explained
How many hours did you get on that belt
How are you liking the mower?
It’s a great mower
Help a lot, thx!!!
Wtf, can’t think straight after watching this.
Why didn't you take the deck off?
I was learning as I was doing. Next I’ll take the deck off and see which is better.
Useless video; really needed different camera angles to see what was going on with that one pulley under the seat
Easy to just cut a bad belt and remove
Not a bit of explanation as to what you are doing, nor decent placement of camera..... what a waste of 25+ minutes
There is no detail in this video. You don't even see where the spring goes. This was no help
What spring? You don’t install or remove a spring.
@@ChadBray there's a tension spring on the pulley which makes removing the belt a lot easier and putting it back on instead of having to take the pulley itself off. I figured it out earlier today when I was trying to figure out what my spring was supposed to go on the deck
You don’t remove the spring, just release the tension on the tensioner pulley using a ratchet, or breaker bar and the belt will come off the motor pulley.
I was originally trying to install a tensioner spring because mine had broken. That was all. But had it been detailed in the video of you actually putting the belt on where people can see what you're doing then the spring would have been visible in your video. It's good to have detail of what you're doing in the video instead of just letting people watch you and have them guess for future references.
Check out some of my videos. Have a good day my man
When you don’t blow the debris off of the top of the deck before the RUclips video starts, that’s a bad sign to the quality of the solution.
The belt broke while ai was mowing, later in the video the deck is cleaner.
Oh for Pete’s sake, tell me why you’re taking off all the pulleys ?!
Something I tried and it worked.
What size belt I need to get for Z335E ?
Google john deere gx25628