I'm from Germany and feel really happy to found your video. That helps me a lot because I'm gonna install a WiFi 6 card inkl. Bluetooth. You made my day. Thanks a lot.❣️❣️
Just a note you'll notice I pause a fair bit when looking at the board. I was looking for the NVMe SSD this Lenovo has. Its actually hidden under a silver finned heatsink and quite small. Hence I didn't spot it.
@@tnasser7363 Its got a NVMe slot which takes the mini cards or a bigger card 80 long. you can just see it in the video at 3mins 11 seconds under a heatsink
We havn't got any of these anymore, but it looks like an 80mm fan. The question really is why are you asking this? This kit runs perfectly well on its base spec but really does not upgrade well to anything needing extra cooling.
@@PhilErringtonSK7 Computer is here. Haven't set up yet. Looks worth the $499 price. Thanks for the spot on about 80 mm fan and the more recent info. Been building and servicing computers for 35 years now, I'm in my 70s and my dexterity isn't so good. My Q9550 that I built for my birthday in 2009 is slowly dying, hence this purchase. Thanks, Phil, for your advice and time. All the best to you. "The JJ"
Its just a slot on the front. If somethings stuck in it you probably need to use tweezers to get stuff out or disconnect it and use an external reader instead
see 2mins 30 on the vid. There are one 16x and and one 1x PCI-E slots. But as its a small form factor theres not too much power so don't expect to use anything powerful.
hi ... i have one lenovo v50t gen 2-13iob but when i login bois press f12 key after login i show in boiss ethernet mac address : not available and i can not show in windows manager device lan network or wifi network i dont no what happend and i boiss the devicess .. and network setup is enable what is the problem
You press the button when it is all connected and on. Or use a paper clip uncurled to press the manual release which should go through a hole on the front of the DVD drive.
Small form factors don't usually generate that much heat. The mesh at the back acts as a passive heat exhaust, the small fan on the power supply makes a very small airflow pressure. Don't cover any holes and you should be OK if your ambient temperature is not massive. Back in the 90s processors didn't even have fans or even coolers and some worked for 20 years plus. a modern chip will operate up to 70 degree Celsius without throttling. The main problem for computers is when they have graphics cards which generate massive heat and need active cooling in a case. This machine should not really be used with graphics cards due to what you've pointed out, its not designed to do this.
Not on this model but there is a socket for a card to do this. Probably easier to buy a PCIe card (1/2 height) if you need big antennas or a USB wifi adapter in to one of the USBs on the front or back.
If you do 2D work then it will work very well. Any 3D work with spinning models needs graphics performance and you should get a machine with a dedicated CAD card such as a Nvidia quadro. A machine such as a 50t won't have much power to power bigger graphics cars, so you should look at workstations rather than PCs.
Only a low power (passive cooled) graphics card. The power supply in these machines is relatively low in power. There is a PCIe slot however and its a full height at the back. Usually garphics cards added to business machines like this are for more outputs which the built in graphics cover anyway. This is not a gaming chasis.
Its not a spinning disk but a high speed SSD directly connected to the motherboard via the PCIe bus. It used the NVMe protocol so is referred to as a NVMe SSD. Very quick compared to a standard disk (about 20x faster).
I'm from Germany and feel really happy to found your video. That helps me a lot because I'm gonna install a WiFi 6 card inkl. Bluetooth. You made my day. Thanks a lot.❣️❣️
No problem glad to be of help.
Just a note you'll notice I pause a fair bit when looking at the board. I was looking for the NVMe SSD this Lenovo has. Its actually hidden under a silver finned heatsink and quite small. Hence I didn't spot it.
does it support (m.2 nvme) or (m.2 sata)
and does it bootable "can i install windows on it"
@@tnasser7363 Its got a NVMe slot which takes the mini cards or a bigger card 80 long. you can just see it in the video at 3mins 11 seconds under a heatsink
@@PhilErringtonSK7 yes sir i see
thank you for your fast respond ☺️
Have one on the way..........What size cooling fan fits in the rear panel? Thanks so much.
We havn't got any of these anymore, but it looks like an 80mm fan. The question really is why are you asking this? This kit runs perfectly well on its base spec but really does not upgrade well to anything needing extra cooling.
@@PhilErringtonSK7 Appreciate the speedy reply. Not going to do any upgrades, just wanted a bit extra cooling. Thanks again. All the best! "The JJ"
@@johnjanoscrat8000 These don't get that hot, there's enough space inside and the chips these have are not high wattage.
@@PhilErringtonSK7 Computer is here. Haven't set up yet. Looks worth the $499 price. Thanks for the spot on about 80 mm fan and the more recent info. Been building and servicing computers for 35 years now, I'm in my 70s and my dexterity isn't so good. My Q9550 that I built for my birthday in 2009 is slowly dying, hence this purchase. Thanks, Phil, for your advice and time. All the best to you. "The JJ"
0:58 can plz tell me sir how to open that card reader plzzzz Sir
Its just a slot on the front. If somethings stuck in it you probably need to use tweezers to get stuff out or disconnect it and use an external reader instead
How many open card slots are there in this machine . I need a couple of PCI-E ports .
see 2mins 30 on the vid. There are one 16x and and one 1x PCI-E slots. But as its a small form factor theres not too much power so don't expect to use anything powerful.
hi ...
i have one lenovo v50t gen 2-13iob
but when i login bois press f12 key
after login
i show in boiss
ethernet mac address : not available
and i can not show in windows manager device lan network or wifi network
i dont no what happend
and i boiss the devicess .. and network setup is enable
what is the problem
Hi Abo sorry I can't give general advice on all pc matters, You'll need to talk to someone local to you who can diagnose the problem.
how many 3.5 inch hard discs can it have this pc (how many) can it have 3.5 inch hard discs?? thanks.......
This has space for one 3.5" in addition to a M.2 nvme drive and a dvd. Its a small form factor case so really not designed for many drives.
How to open cd tray
You press the button when it is all connected and on. Or use a paper clip uncurled to press the manual release which should go through a hole on the front of the DVD drive.
why it dont come with fan for exhuast ? just one fan on Processor wtf?
Small form factors don't usually generate that much heat. The mesh at the back acts as a passive heat exhaust, the small fan on the power supply makes a very small airflow pressure. Don't cover any holes and you should be OK if your ambient temperature is not massive. Back in the 90s processors didn't even have fans or even coolers and some worked for 20 years plus. a modern chip will operate up to 70 degree Celsius without throttling. The main problem for computers is when they have graphics cards which generate massive heat and need active cooling in a case. This machine should not really be used with graphics cards due to what you've pointed out, its not designed to do this.
It has inbuilt Bluetooth or wifi..?
Not on this model but there is a socket for a card to do this. Probably easier to buy a PCIe card (1/2 height) if you need big antennas or a USB wifi adapter in to one of the USBs on the front or back.
can i use this computer as a student for archicad and autocad?
If you do 2D work then it will work very well. Any 3D work with spinning models needs graphics performance and you should get a machine with a dedicated CAD card such as a Nvidia quadro. A machine such as a 50t won't have much power to power bigger graphics cars, so you should look at workstations rather than PCs.
Is the power supply a standard 24-pin one ?
No its a custom one. Not really a machine to alter other than adding storage and RAM which we show in the video.
can i add a graphics card to it ?
Only a low power (passive cooled) graphics card. The power supply in these machines is relatively low in power. There is a PCIe slot however and its a full height at the back. Usually garphics cards added to business machines like this are for more outputs which the built in graphics cover anyway. This is not a gaming chasis.
yes
Is the hard disk 7200 rpm ?
Its not a spinning disk but a high speed SSD directly connected to the motherboard via the PCIe bus. It used the NVMe protocol so is referred to as a NVMe SSD. Very quick compared to a standard disk (about 20x faster).