Duplicating a key on a HPC Speedex Key Machine | Mr. Locksmith™ Video
HTML-код
- Опубликовано: 15 сен 2024
- Duplicating a key on a HPC Speedex Key Machine | Mr. Locksmith™ Video.
For further infomation go to mrlocksmithtrai...
In this video I'm just going to duplicate a Schlage key. Two simple safety rules in locksmithing as follows:
1) Always wear eye protection
2) Do not stick your finger in the cutting wheel.
Quite simple, that's our two safety rules for locksmithing. I'm going to duplicate a key. This is a HPC SpeedX, it's a good little simple key machine. It's inexpensive, it's still good quality. It's not one of these cheap offshore ones, you're going to get lots of service out of this.
This key machine is approx. seven years old with a lot of locksmith students playing with it so it's stood up really well and still using the original wheel. The students have not managed break this one. Saying that, watch tomorrow they break one.
We are going to duplicate a Schlage key. I always like the ilco key blanks. One of the biggest problems that newbies and everybody else makes they put the key in like that so it's really just, just a little bit up and your key is not going to be cut correctly. So what I always do, I always have my finger on the end when I'm putting the key in. So we're going to take our key to be duplicated, I like to put it about there and it's nice in there firm. I put in my blank, then I bring down, I'm going to measure it from the shoulder. Nicely tighten these down, get the guide out of the way, turn the key machine on, don't cut the shoulder and don't run it down the end. This is a 5 cut Schlage, the blank is a 5 cut so do not cut on the shoulder and I just cut the key.
Basically I'm just tracing it so again, don't run it down the tip. If I want to just double double check and you don't have to push hard on the machine either. It's making sure you get the flats, the slopes. Now you just turn, turn the machine off to be safe, take they key turn it back on. Now just give it a little brush, get the burs off of it. Put the key in, perfect, she turns. In another video I'll show you how to adjust the key machine. And again, I always use a Schlage original key, Schlage original lock and I all use, I try to use Schlage original keys to set any key machine I work on. That's going to be in another video.
This one's just showing you how to duplicate the key. Remember safety first, where your safety glasses, don't put your finger in the wheel. And again, just carefully trace your key and cut it and you'll have a perfect key every time.
Visit my website for On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous "Dumb Key Force Tool" that opens Smart Key locks in seconds go to mrlocksmithtrai...
Looks easy, why can't anyone in a hardware store get this right?
Hi, Does car key length, metal part, for example for Honda key, of a blank key has to exactly match the original key length for laser cut? A blank key length is a bit shorter but I don't think it is matter. I am kind of new to this.
Is the speedex a good maching for automotive keys
The Speedex is an ok key machine but mostly for the simple residential keys (Kiwkset, Weiser, etc.). For Regular and Automotive keys, I prefer the Framon Key Machines or for High-Security Automotive keys I use the Miricle A5 and A9s.
does this machine use the 23 RF cutter? I am not found of the radius on the cutter. it will not make cuts that have sharp corners in the root of the profile. i had Gilray tools sharpen 2 23RF cutters. they came back with a flat instead of a radius. I was very pleased actually. I use the resharpen cutters on my small Ilco mini mite. Makes great keys. I can make an original from space and depth keys within .002". I really like the flat on the cutter. why isn't the new cutter made with a flat instead on the. .032" radius?
Side Hussle
Great channel . I've got a question . Can you give any input on how to protect a front door with a sidelight ?
Double Cylinders Deadbolts are great but you can not get out in case of a fire unless you have a key. Illegal in some areas.
However, I have one on my house because if they break-in via a window they can't take my stuff out via the front door.
Sidelight: Lexam or the new 3M Shatterproof film is a very good product and I recommend the film be installed on any glass on the main floor.
+Mr. Locksmith thx for the reply . I'm having an impact door and sidelight installed next month . I am selecting a multi point lock system for added safety
+Mr. Locksmith absolute and by far a great channel
Doesn't matter what kind of lock I have on my front door. My apartment has one of those card board closet doors most of the time you just push on it and it opens. This building was made in the 70s it still has the nasty yellow flower wallpaper in the kitchen. I try to look mean and dangerous when I go outside so my neighbors think I'm scary lol and I'm almost always home and everyone around me knows I'm here
it,s crap , junk, buy an SEC-E-9 and get it over with 2400 dollars and fully automatic SEC_E_9 and my blitz this is 24/7 locksmith service!