Orangatang Dad Bods with Loaded Mata Hari
HTML-код
- Опубликовано: 15 ноя 2022
- Carving it out on the beach front with the HUGE 105mm Orangatang Dad Bod wheels set up on the 44.5" Loaded Mata Hari with Paris 180mm 50º trucks and Nipples bushings. Super fast and smooth roll, plush carvy feel.
See the full review here www.ridingboards.com/orangata... 
Спорт
🤙🏼 *105mm Orangatang* 🤩🤙🏼
also let me know if you need someone to film you! I've got a long distance puming setup with only 70mm wheels. am planning to buying bigger wheels. found 96mm for cheap on aliexpress, will try those before I buy orangatang. orangatang wheels are selling cheaper on taobao, probably be buying them from there.
I wonder if these will fit my loaded pantheon trip
Check this out www.ridingboards.com/orangatang-dad-bod-review/#Dad_Bod_with_Pantheon_Trip_Collab
@@RidingBoards they fit with a flat washer under the board side cupped washers, orange nipples cupped washers roadside
How does it not wheelbite?
it definitely will if he actually leans not just light carving.
R - is for riser pads
It did a little with the Knuckles bushings but swapping them for the Nipples with cupped washer solved it www.ridingboards.com/orangatang-dad-bod-review/
@@donutflips4394 If Loaded says: "Paris 180mm 50° trucks, ½″ riser, Nipple bushings with a cup washer roadside." will fit, you can be ashure, that its fit!
Thats the difference between Loaded and all the others!
@@holterdipolter7955 They didn’t mention cupped washers though.
dude what you doing in Casablanca? XD I was like damn this road looks familiar. let me know if you planning on selling your wheels/board . perhaps this my only chance to get my hands on one lol
Hey sorry for the late reply, I plan to go back there for a few days soon, if you're around shoot me a message on ridingboards.com. Ride on!
Will it fit to Icarus?
Haven't tested yet, I'll check and let you guys know shortly
@@RidingBoards Thank you! ;))
Hey, you can see the info for the Icarus here: www.ridingboards.com/orangatang-dad-bod-review/#Dad_Bod_with_Loaded_Icarus
@@RidingBoards damn, you write articles so fast :)))
Awesome!!! Thank you for all info!
@@SlavaChrome haha not that fast, quite a few hours went into it! Glad you find it useful. Ride on!
from what I've seen from the video. the 105mm arent the best for light cruising and carving. you need pumping setup, you can easily achieve it through wedging your trucks and putting hard bushing in rear truck and softer in front truck. you'll also need to shave the trucks holes so that they have higher movement range thus you get more energy from the bushings pushing you forward and maintaing speed. then! you'll enjoy these wheels very much :D you be flying :)