Very nice to hear this! I love the Cults but I never understood why they not make a wider negative space. The same on the Shifts. Just a couple of mm more and everything had been fine. So, I wrote them before 2 years a letter to adjust the soulplate a little bit. After they told me that they can not do this because they need to change the whole production process and that would cause too much extra costs. But it seems, that they received in the meantime a couple of more letters concerning this theme...😉 Thank you very much for the information!💪💪💪
The soul plate on the Shima 2’s and Elliot models has 10 screws affixing it to the boot, 12 if you count the nonUFS frame mount. They got “twisty” and bendy when Razors removed like 6 screws, plus they made the material much slower. I have both versions
Just got back into aggressive skating after 20 years.. i used to skate k2s but just got a pair of razors cult streets and i love the customization options they offer.. definitely will be upgrading the soul plates to these 👌👌
Hey good sir. I was an aggressive inline guy in the 90s it's what I did in the warm months. Tho 2005 I stopped until now. I just bought the new remastered razors shima 3 skates. I'm being totally honest when saying I'm out of the loop and basically starting from scratch. I'm 45 now and I was a pro athlete for 20 some years so I felt confident getting a trickier skate. It has a smaller grind surface and negative side. But I did buy the Gawds Paul John 57mm wheels to throw on Also a complete flat ride like the original skate it comes factory as but the wheels are gnarlier looking with old English letters on a pink wheel . I need help tho and I watched some vids of urs. What kind of plates can I put on the new Shima 3.? And the different wheels I bought the 57mm will those fit on the shima 3 factory frame? I am looking to get different plates and extra stuff to customize the shima 3. If u cud help in any way as far as info I'd be super grateful!! How can I customize the shima 3? I'm looking for high end gear I am a tall and heavier guy then I was at age 26 when I stopped. so durability is important. I need strength and the wow factor. But with my skills starting over and learning new terminology and so on I cud use some valuable help.😊 I went with 57,mm wheels for more stability their a flat wheel. I always ride 8 wheels at least for now. and I'm used to a flat ride . How can I change it up with different parts? Ps hopefully no drilling needed!! Thankyou thankyou if u can answer my questions. Pss I did subscribe! Be well sir 🎉 Psss also wondering about the flt4 frame and possible different frames to swap..thanks!!
Holy hell you just brought me back. I haven’t seen the name Nimh in FOREVER! But yea, these look pretty sick. I’m excited to see them out in the wild, maybe I’ll consider as my next purchase. Got an old pair of Cults that would look REAL pretty with these
Felt footprint glued in? Jeez, try even harder to not get your skates wet! You won't be able to dry them well and that felt might get moldy and stinky!
Very nice to hear this! I love the Cults but I never understood why they not make a wider negative space. The same on the Shifts. Just a couple of mm more and everything had been fine. So, I wrote them before 2 years a letter to adjust the soulplate a little bit. After they told me that they can not do this because they need to change the whole production process and that would cause too much extra costs. But it seems, that they received in the meantime a couple of more letters concerning this theme...😉 Thank you very much for the information!💪💪💪
The soul plate on the Shima 2’s and Elliot models has 10 screws affixing it to the boot, 12 if you count the nonUFS frame mount. They got “twisty” and bendy when Razors removed like 6 screws, plus they made the material much slower. I have both versions
Just got back into aggressive skating after 20 years.. i used to skate k2s but just got a pair of razors cult streets and i love the customization options they offer.. definitely will be upgrading the soul plates to these 👌👌
I want to see you skate these, make it happen Razors 🙌
Buzzing with this 👍👍👍 just what I’ve been wanting
You’re so lucky you got those Moonshine soul plates, wish they’d make more of them.
Those are dope !
Now we just need them to make a one piece for the Genesis boots.
Ordered mine last night. 🎉
Hey good sir. I was an aggressive inline guy in the 90s it's what I did in the warm months. Tho 2005 I stopped until now. I just bought the new remastered razors shima 3 skates. I'm being totally honest when saying I'm out of the loop and basically starting from scratch. I'm 45 now and I was a pro athlete for 20 some years so I felt confident getting a trickier skate. It has a smaller grind surface and negative side. But I did buy the Gawds Paul John 57mm wheels to throw on Also a complete flat ride like the original skate it comes factory as but the wheels are gnarlier looking with old English letters on a pink wheel . I need help tho and I watched some vids of urs. What kind of plates can I put on the new Shima 3.? And the different wheels I bought the 57mm will those fit on the shima 3 factory frame? I am looking to get different plates and extra stuff to customize the shima 3. If u cud help in any way as far as info I'd be super grateful!! How can I customize the shima 3? I'm looking for high end gear I am a tall and heavier guy then I was at age 26 when I stopped. so durability is important. I need strength and the wow factor. But with my skills starting over and learning new terminology and so on I cud use some valuable help.😊 I went with 57,mm wheels for more stability their a flat wheel. I always ride 8 wheels at least for now. and I'm used to a flat ride . How can I change it up with different parts? Ps hopefully no drilling needed!!
Thankyou thankyou if u can answer my questions. Pss I did subscribe! Be well sir 🎉
Psss also wondering about the flt4 frame and possible different frames to swap..thanks!!
Cult plates are definitely fast af. Even compared to the other razor boots.
These looks really nice when broom skates them. I want to try them
he is on shift 2
@@bfdk6743 broom been skating cults since his boot came out
🥸“What is that velvet”🤣
Yo wtf!? I came to say that lmaooo 😂😂
So a de-skinned Nimh...well, looks like I'm buying cults next.
Holy hell you just brought me back. I haven’t seen the name Nimh in FOREVER! But yea, these look pretty sick. I’m excited to see them out in the wild, maybe I’ll consider as my next purchase. Got an old pair of Cults that would look REAL pretty with these
could you imagine if they made one piece souls for the SL boot?
They sorta did, it went from 4 pieces to 2 lol. If you were not aware.
🤟🏻❤️🤟🏻
Felt footprint glued in? Jeez, try even harder to not get your skates wet! You won't be able to dry them well and that felt might get moldy and stinky!
Uhhhh…..are you watching your own stream on the TV behind you? 🕵🏻♀️
😂😂😂😂😂😂😂
future reference don't paint the part you grind on, unless you love slow slides. (which no one likes slow slides)
Appreciate that. It was a hasty job for the sean kelso video. Careless overspray.