ATV Wash Plant - J.Farmer Mining
HTML-код
- Опубликовано: 17 окт 2024
- NO LONGER HAVE DEALERS - DIRECT SALES ONLY NOW:
Gold wash plant fed by mini excavator - Automatic shaking feeder for well regulated feed - high pressure rinse for over sized rocks - towable by ATV, automobile, tractor/excavator - comes with standard sluice - best value in a 2/3 YPH wash plant - Designed and manufactured by Joel Farmer.
See products at: sites.google.c...
You need a feeding hopper for the excavator to do his job right! And make the sluice longer and wider so you catch more gold!
You're absolutley right - this was the prototype and now it comes with two sluices( the sluice shown and another that is twice as wide.)
Thanks
Nothing better than gold bearing ground in the back yard
That’s a nice unit there buddy. Hell of a lot better than panning all day.
this is the most amazing piece of machineary.thank you for the video.
Are you still building theae Joe Farmer
Nope he gone
The sluice could be bigger as im sure you realize. A secondary sluice or long tom would be the only thing i would do to it. Other than that a man would break his back trying to fill that with a shovel. Looks like a good piece of equipment.
Looking for the shine, myself! Happy hunting! Thanks for heads up!
The Idea is sound but it needs some upgrades. Feed table walls to short so it looks hard to get excavator into perfect position to dump. Your screen is to short so and plus or slow downs and water with silt will be thrown out along with fine gold. The biggest problem is the sluice. It is too small to handle the water flow. you need to be 16 inches at least and four feet long with that flow. GoldpropectorBC
Yes, we are working on that. We'll post a video when it's completed!
Thanks,
Joel
veryyyyy cool set up I love how well its washing the rocks but I agree with alot of the other comments I would either increase the size of the sluice box or add another of the same size seems like its a little much for just the one
Great setup but sluice can use alot of work . Its to short and narrow no time for gold to settle. Like to see about 8 ft of 12 or 14 inch with dampeners to slow water.
I was hoping to give this a thumbs up but no results called GOLD were shown at the end.....?????????
How large of a gen set would I need to run the vibrator and what size pump do you think I would need?
Is this a shaker table? ....I'm trying to get away from metal fatigue of shakers... and only running sandy materials through.
This is not a shaker table - it is a shaking pan feeder screen plant. It can be set to run sand.
Nice concept, it really eliminates the need and added cost and weight of a trommel. I agree with the water flow comments and would also the length of the grizzly bars. You now have me thinking of a recirculating system as well...
Good job.
but I like a trommel :)
Cool machine. Especially when you've got a small excavator handy :)
How much yardage are you running per hour? Will it work with the sluice box under the wash plate? How dose it travel down the road?
Would it be a good idea to put a gold cube before the sluice just asking
It almost appears that the water volume in your secondary is too much volume, and much of your smaller flakes are being washed away. I would add a sediment/ water collector to catch the small flakes and re use your water. Looks like a nice rig.
So where does the gold collect on the this machine? I'm just getting into this prospecting and no, I don't know much. But I don't see where the gold is being collected.
The small sluice that the slurry is flowing down has riffles in it that recover the gold - They come with a larger sluice now, this was the prototype unit.
Wow this is perfect for feeding a trommel
Really moves the dirt!!
its a nice rock separator, but nowhere near a wash plant.
Are you guys still in business, got bought out by somebody, closed shop or what I cant find anything on you guys
It looks like you can run about cubic yard in a bout 10 minutes. I am fairly well impressed for such a small unit
Thanks Walter - Pan feeder/screen plants are well suited for clean sandy gravels.
@@goldrushpro I recently purchased one of your plants it has a vibrating feed tray it has a 24"x10' sluice box and takes a 3" pump the sluice comes under the plant toward the hitch. Just wanting to know size. 5 or 10 yes hr.
@@bobback3521 - Do you mean 5 or 10 cubic yards per hour?
@@goldrushpro the one I bought has a sluice thats 24" I'm thinking it's about 10 cyds a hour. It has 4 spray bars over the grizzly.
@@bobback3521 - Yes, in clean sandy gravel that unit can handle over 10 CYH.
you should make more video's of the ATV wash plant
Is there an updated website that I can access to order?
Nice have used or new one for sale?
What size of pump do u use for this unit and how many gpm?
ॐ relaxing sounds music
I think you should have shot the plant dry then wet with a final look at the gold in the box. But I did enjoy listening to the motor run! It's illegal to run a motor within 300 ft. of a creek where I live. SUX
Mic Abe - Yes, very sorry I didn't show the clean-up. I'm in the process of updating my RUclips channel. I put up these video's with the first prototype units and I've been so busy for the last seven years with my own mining operations, design and manufacturing, consulting, and professional testing, that I haven't had a minute to put up more professional video's. I put up two new video's a couple weeks ago and I'll make some more like it for you this year!
Thanks,
Joe
are there plans for a smaller version for shovel use only and to be abble to get down a small trail no road?
How $$ If you can tell me. Great job
What size pump are you using
How much water do you need for your plants I have limited water GPM??
Approx. 30 to 50 GPM with the ATV wash plant.
Thanks,
Joe
thanks you
Clarkson riffles are a damn fine design, but damn son, I ain't ever heard of no miners losing 30 to 50% on their capture rate, and viewing it as the cost of doing business. Sounds more like catch and release mining to me.
Lol I'm not the only one that gets idea's after watching gold rush I was thinking about a smaller all in one like Tonys drege but I'm more of a fix it with a hammer guy so just cool to think about it
Very nice build except for the sluice.Too small.go a little wider and lose the expanded and carpet.A little less angle also.Way too much water for fine gold switch to keenes Mirical matt.Will do wonders .Luck Mcbain.
Simple and nice.
Do you ever answer any comments????
might you decide to add a fluid bed? I would also think about adding some type of bubble brush
Nice
😂😂😂 he is really going for it
How do we place order?? I'm in Ghana West Africa
Muito interessante
gracias pero estoy jubilado
perhaps just a little more room to run...like another sluice so to be sure to get it all.. like the working this is doing
whats the tph on this unit and what is the recovery % of gold and how much is it?
Your website link does not work , do you have another page very interested in this set up but would be nice to be able to see more information please
Very sorry - the web host still hasn't fixed the mobile app - it should be accessible from laptop's/home computers.
Thanks,
Joe
Which link Joel Farmer ? jfarmermininggold.com/ or sites.google.com/site/simplic... im on a laptop .
You should be able to access @ jfarmermininggold.com/
Thank you Joel Much appreciated with the quick respones cheers Lockie :)
@@goldrushpro how do you make it shake?? Note video of the underside to please
Das ist ja geil....
that sluice is 100% to small .... you need 14 inches wide 4 feet long and u would be able to run 10 hrs easy before clean up
Who needs to run 10 hours before clean up? It only takes literally a couple of minutes to wash the mat out in a bucket and get right back to work.
water 2 fast 2 get all the gold
no it isn't
I really like this TVA gold washer machine,I want to buy one so how much it will cost, I'll ship it to Papua New Guinea thanks.
You can go to www.jfarmermining.com to get more information on the ATV wash plant.
Thanks,
Joel
i wanna buy this...please reply
Do you have a website?
Hello Joel... do you have the washer in stock!!! how much does that cost? Regards
Very sorry, I'm retired and J.Farmer Mining no longer manufactures equipment.
get the 【price&specifications】 pls click our website:www.chinafote.com/sand_washer.html?hwy
my whatsapp:+8615290262659
👌
Would like to see the results?
Still making equipment, you gone somewhere else? Idaho, Boise?
Matt cat - Closed the manufacturing down while gold prices are flat (I'm gone mining myself 😉)
@@goldrushpro gold prices are no longer flat got one for sale?
can this unit come in a 30 to 50 tph unit with double sluice boxes?
your website link doesnt work
How much? Cif San Antonio Port, Chile
ya estoy jubilado gracias
@@goldrushpro So sorry. THANKS ANY WAY!
How much cost for this
Hello, want to know 【price & details 】about 【gold washing plant】please click web:
www.chinafote.com/vibrating_screen.html?zlY
We supply spiral classifier, welcome to click here for price:
www.foteinfo.com/spiral-classifier-22.html?chu
Cual es la funcion del motor?
Creo que hace la vibración que empuja el material...
tumble those rocks in a round tromel
Any updated video with the 2 sluices?
oi boa noite e como eu faço pra adquirir uma dessa
Is the table spring loaded
I see there is a Trommel in the background there,
Mi saludo Cariñoso desde el Desierto de Atacama (North) TARAPACA CHILE....amigo, junto $ , para mejorar mis maquinarias,,,solo uso PLATO_VERDE.. Buena Suerte para ti y mis saludos.
Santiago Lazo Mongillo
PICA Pueblo
CHILE
Amigo de que parte eres, me gusta la busqueda de oro, tengo detector y vatea de madera . Busco alguna persona que invite mi correo es leonel_araya_@hotmail.com
Me gustaría trabajar en dagua Valle del cauca y muy buenoro y grueso Yo también tengo un localizador de oro y un laberinto me lo hago yo acá en una chatarrería de un amigo consigo los implementos y hacemos un laberinto a la hora que queramos de bajo precio número mío es 300 437 7189 bendy ciones amiguito desde zarzal Valle del cauca
Ola boa tarde tem como de vc me manda o desenho desa lavadeira ???
Me puede dar su teléfono por favor, para tener mejor información al respecto...
Ya no trabajo estoy jubilado.
where can I
buy one
Robert, sorry I've retired the manufacturing division.
40%,50%???
Wtf is that on the ass of the trailer? A stream sluice!
Anyone here think that sluice box is too short
No one here, I've been retired for a long time.
(but yes, that was the original prototype, and it eventually did get a larger sluice box)
Just show me the Gold.
Daniel Olson AHAHAHAHAH
There is no gold. This dude got into building washplants. He likes being creative and designing washplants. Problem is, there isn't a high demand for these washplants he builds.
use it on your backyard..lol
i need silica sand
I want this
Welcome to click this for details: www.fotemining.com/sand_washing_machine.html?cxf
Porch swing
waist of ur day
how?
I would sabotage your machinery because the noise pollution would drive me over the edge.
😳
Rene Mendiola 😂😂😂
nssd a fixa flat
Are you dead?????
Fucking utube got fuck up everything
How i can buy it.
Wikran Chaisakorn
- That machine was discontinued years ago.
get the 【price&specifications】 pls click our website:www.chinafote.com/sand_washer.html?hwy
my whatsapp:+8615290262659