2 Angle Grinder HACKS | Woodworking Ideas
HTML-код
- Опубликовано: 12 сен 2022
- Easy removal and attachment.
Fixed function added to the handle of the angle grinder. By fixing it, it can be used as a lathe or belt sander.
Angle Grinder
Brand: Bosch
Model Number: GWS7-100E
Plywood
Brand: @Plywood (Sakuma Lumber Co., Ltd.)
Type: Shina plywood lauan core 15mm
Hardwoods
Red Oak, Black Cherry: Woody Yoneda Co.
Iron plate: (Thickness 4.5㎜) Handle
Stainless steel plate: (1 mm) belt sander
Iron angle: (thickness 3 mm) 30 mm x 30 mm
Shaft rod: M10 screw and 10 mm diameter rod (linear motion rod)
Belt sandpaper: width 75 mm, length 533 mm
When using a lathe or belt sander, the speed setting of the angle grinder is used in the slowest mode.
I plan to try installing a shaft coupler because the belt sander caused a lot of vibration when the rpm was increased. - Хобби
11 000 оборотов на гриндер или токарный!!!!!!!?? Да вы батенька мазахист!
Батенька.В данном случае скорость будет огромная(ленты).Берём регулятор от пылесоса и проблем нет,правда теряем в мощности,но это не критично.В случае с токарным не пройдёт эта приблуда (50/50).
Если внимательно смотрели ролик, то на 14.48мин. мастер регулирует обороты на УШМ.
@@vogyll Все правильно.Если увеличивать диаметр верхнего вала гриндера,то скорость ленты будет уменьшаться (как вариант).
@@user-wi5hn7wy3d не будет меняться скорость от изменения диаметра опор ленты. Привод же не меняет свои обороты! Вы перепутали с шкивами в ременном приводе
@@user-wi5hn7wy3d на токарном по дереву обороты 400-900-1200, ну максимум 2000 +/-. Даже с регулировкой оборотов болгарка не даст меньше 4000-5000. Разнесет "токаря" к чертям, на щепки. Ещё из дрели делать токарный - куда ни шло, но никак не из ушм
С такой ручкой не успеешь руку отдернуть при нехорошем раскладе.
Parabéns pelo trabalho. Ficou muito TOP esse projeto. Ótimas dicas. Bom final de domingo. Ótima semana. Abraços brother. Falando de São Paulo Brasil.
🇧🇷🇧🇷🇧🇷🇧🇷👏👏👏👏👏🤘👊
CONGRATS! That achievement of yours shows perfectly why it is very important and convenient to buy a VARIABLE SPEED angle grinder, and Bosch is one of the very few manufacturers that sells Variable speed grinders. My admiration and respect for your excellent work.
Thank you very much!
We can use standard angle grinder with a lamp dimmer
@@masgiver NOT CORRECT... See, when using a dimmer, as soon as the speed is lowered, the motor loses its torque.
At one time I was almost ready to buy a cheap angle grinder, the brand was "Gladiator"... at the store, I put the speed control to the minimum, and I was able to completely stop the 4 1/2" Disc with my bare hand... as the motor had lost all the torque!
That is the reason why truly good angle grinders, like METABO , Bosch ("Professional line" or high end), or a couple of Makita 115 mm grinders have something called "Constant Torque" or "Constant variable speed", or "Vario-constamatic®" a more elaborate circuit that COMPENSATES the current to MAINTAIN an almost constant speed when the tool works under a heavy load. A Dimmer is a poor way to try to vary the speed of a tool. Sorry, there is simply NO comparison!
@@alfredomarquez9777 very enlighting, buddy. Thanks
@@alfredomarquez9777 claramente es así👍👍👍👍.
... отличный получился настольный станочек из фанерного материалла, молодец парень, дай бог тебе здоровья и благополучия новых творческих успехов 👍👍👍🤓🛠️🔩⚙️🔗📎📏🗜️🦾👌🆗🇷🇺👈!!!
что такое 2 ХАСКИ?
@@CHUDAK-69 видимо имелось в виду -2 лайф хака)
Лучше всего использовать болгарку с регулятором оборотов или подключить отдельно диммер
Оригинальное решение простой задачи 👍. Такие же видео я смотрел на других каналах, но Ваше решение мне кажется самым оптимальным 👍. Чем проще, тем надёжнее
I was trying to find a good DIY lathe video last week and now you drop this content. Love it
Thank you very much. The lathe that bolts the wood to be turned is easy to use. Angle grinders are powerful, but the vibration can be a bit annoying. If vibration is a concern, you can use an electric drill.
@@YASUHIROTV if you didn't know, an electric drill, and an angle grinder for that matter, don't have the correct bearings to be used as a lathe. If you're into putting unnecessary wear on tools instead of having the right tool than by all means. But how many times can you repurchase a drill before it would have been better to buy a lathe?
@@Richinnameonly this example uses two bearings after the angle grinder. So if everything is aligned well, the bearings in the angle grinder should not have any tangential load. It should be easier load on the tool compared to cutting or grinding steel. Another motor with a drive belt would make this built even better, of course. A drive belt slips in case of excessive torque.
HERE'S A BIG FAT KUDOS TO THE IDEAS AND REALIZATION
0:00 見栄えの都合だと思いますが、金の卵のメーカーではパッキンの付いている面(ラベル側)をグラインダー本体側に向けて付けることを推奨しています。
Nicely done! 👍
Beautiful
Здравствуйте, смотрю ваш канал ,вы умничка,трудяга,удачи вам и творческих успехов
Спасибо, что посмотрели наше видео. Мы будем стараться выпускать более качественные видеоролики.
@@YASUHIROTV только изучите технику безопасности и физику перед началом работы. Судя по тому, что я вижу в этом ролике вероятность травм очень высокая
So good!
УШМ 125-я, у неё 11000 оборотов, на токарный и гриндер... ага. Реанимацию вызови перед использованием
на 14.48минуте мастер регулирует обороты УШМ.
регулятор оборотов там
@@vogyll в ушм меньше 4-5 тыс оборотов не поставишь. В два-три раза выше обороты, чем требуется
great ideas!
Как мастер мужик молодец но таким инструментом Я бы не работал😉
Большая хорошая работа. Но шлифовалку проще купить положить на бок. Я давно так использую. Очень удобно и без геммороя изготовления.
An artistic handle for angle grinder
Clever as ever.. 👍👍👍
Wonderfull. You are a true artist❤
thank you bro for your idea
Great idea....
correct me if i'm wrong, but for both of these hacks i think you need a variable speed angle grinder, which most arent. anyway, the builds and ideas here are very nice
excellent!
Восхитительно!!!!
"Восхитительно" это только рабочий процесс, а полученные станки с такими оборотами привода это самоубийство. Да и использование такой "универсальной" рукояти для ушм это путь в больницу...
Nice work, i always waiting your video. Good job 🙏
Thank you so much 😀
よし、買おう。
Tuyệt vời 👍👍nguồn cảm hứng cho các bạn đam mê kỷ thuật!
Great work! Can you adjust the angle grinder as a table saw?
Thanks!
楽しくためになる動画ありがとうございます。
丸鋸で木材カット後にスマホを操作されているようですが、これはリモートでACをカットしているのでしょうか
お教えいただけますと幸いです。
またまた考えましたね!
サンダーを生かしていろんなアイテムに変身ですか!
やはり便利ですね~👍️
大きい機械を買いたくないので、ハンドツールを様々なものに変身させています!
振動が少し気になりますが便利なものができました。
1番欲しいものでした! 嬉しいです!!
Exceptional craftsmanship bro. Over engineered if anything 👍
Thank you very much!
Wow...mantap sekali bang..
RESPECT
この方法でlatheを作る場合、max何mぐらいがlimitなのでしょうか?
Отпусти меня- думает болгарка.
Super!!!
Позовите доктора. Хотя такое он уже разбирал. 250 полуляхов из 250.
Bem pensado 🥇
Can you tell the name of that yellow masking tape you putting on a drill bits? it seems very popular in Japan
3:10 Как грамотно найден центр. Лёгких путей не ищем. Упрощать сложно, усложнять легко.
Very good sir ji grender hacks
Спасибо
Ver good ✅
Really good method for using an angle grinder. I was wondering if you think that an angle grinder can be use also to build a disc sander??? Hopefully you'll make one soon. Thank you.
Thank you! I think I can make a disc sander with an angle grinder.
@@YASUHIROTV I woud love to see something like that as I have a few angle grinder and I would like to use one to make a good disc sander. If you were to use an angle grinder for that what size of disc (diameter) would be appropriate?? Thank you for answering.
Yeah, he broke that M6 Drap !
Nice🇧🇷😉👍👏👏👏👏👏
but the grinder does not turn too fast for a lathe?
Самоделка интересная, правда выполнить ее потребуется дюжина станков и не из дерева а из металла. Нарезка резьбы в дереве клеевое соединение это за гранью реального.
It is a sort of hypnosis!
Number one
250 полуляхов из 250ти
これを作るのに必要な道具や労力を考えると買った方が安いし物も遥かに良質
今回も完成度の高い作品ですね。毎度DIYの勉強になっております。
よろしければスライド丸鋸とボール盤何を使っているか教えていただけませんか?
近々その2種を購入する予定なので参考にしたいと思いまして。よろしくお願いします。
ありがとうございます。
SK11 卓上ボール盤 300W SDP-300V
マキタ スライドマルノコAC用 刃径165mm/直角切断幅312mm レーザー付・樹脂ベース LS0612FL
どちらも使いやすくておすすめです。
영상 잘 보았습니다! 또 오겠습니다!
비디오를 시청해 주셔서 감사합니다!
Каждый инструмент предназначен для выполнения определенной работы. Универсального инструмента нет, на котором с хорошим качеством , безопасно для здоровья выполнить любую работу. К примеру болгарка выдает около 14 тысяч оборотов, эта же скорость вращения ротора обеспечивает ей хорошее принудительное охлаждение, сделаешь меньше обороты - сожжёшь электродвигатель, сделаешь больше - можешь получить вырвавшейся заготовкой удар заготовкой из дерева по голове. Много "самоделов" попадают на приём к врачам после пользования своими инструментами болгарками- пилами, дрелями-измельчителями. Не экономьте на безопасности.
for both (lath , belt sand) drill is more suitable , angel grinder is too fast 11500 rpm vs 3000 rpm for a typical drill.even with dimmer angel grinder at lower rpm have much less power at lower rpm vs a drill .
отлично . но как рукоятку использовать нельзя .
Bom dia,minino coisa boa.
Видно снимать умеете, непомешает инструкцию почитать для ушм.А так всё красиво.
多様に応用できますね。 とてもいいですね。
ありがとうございます。
アイデアもさる事ながら、動画が見易くて美しい!!映像作品としても感動しました。照明も撮影アングルもかなり考慮されている。
この治具は作りたくなりますね。勉強になります。ちなみに木と鉄を接着する際の「接着剤」は何という商品をお使いでしょうか。
映像を褒めていただけるのはうれしいです。ありがとうございます。
鉄と木材の接着はJ-B Weld (ジェービーウェルド) エポキシ接着剤です。
ご教授ありがとうございます。
他の動画も拝見しましたが、素晴らしい作品ばかりですね!
これからも楽しみにしております。
Нихуя не понял но очень интересно
Ao traduzir o título deveria ser mais correto. De moedor para esmerilhadeira tem muita diferença
両面テープで固定してのカット。
板のズレ防止のための単純なことですが気が付きませんでした。
参考にします。
👏👏👏👍👍
Can we get the plans
Hello! I've got interested in your woodworking! I love gumball machine so much! Will it be possible if you could make small wooden gumball machine for me? Hope you will reply! Thank you!
l
角磨机:我要干那么多活,不累吗?! ( 以上开玩笑,多功能工具很棒。)
Прикольно. Но слишком сложно в изготовлении.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
👍😁💟
Have to explain that the angle grinder has different speeds
Смотрю я на это всё и у меня двоякие ощущения: вроде бы и человек с руками, и делает с виду аккуратно, но в то же время это такая лютая херня, минимальные обороты даже у бош под 125 диск что-то вроде 2800, не многовато ли, и учитывая из чего сделаны упоры для заготовки, не дай бог её вырвет, полетит заготовка стабильно в лоб с таких оборотов, даже если вместо ушм использовать дрель, и рано или поздно подшипники в фанере разобьёт, и бить всё это дело будет ещё сильнее, а держать хуже, и опять же результат: заготовка вылетит в лоб, так как направление вращения относительно человека против часовой стрелки, и ещё один момент: нарезание резьбы в фанере? Серьёзно? Надёжно, блин, как швейцарские часы
250 полуляхов из 250
旋盤のとき使ってるのはなんですか?どこで購入できますか?
木工旋盤用バイトのことですか?すべて鉄や木以外はアマゾンで購入しています。
🥰🥰🥰🥰🥰👍
I had a lot of old pipes and rebar to cut up and from what I read ruclips.net/user/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
Hello from Philippines. I've got interested in your woodworking! Will it be possible if you could make small wooden gumball machine for me? Hope you will reply! Thank you.
Приветствую. Огонь.
Couldn't this all be done with a scrap electric motor?
I don't have half the tools you used to make this, and can't afford them.
14:26
Токарный станок на 11к оборотов.?...
Проще купить. Свой труд не ценим называется
]]] ayyyy
Из названия понятно, 2 собаки хаски, для болгарки!?
Только хаски !.А не какие-то, пикинессы.!
Люде не делайте так ушм сгори или хотя-бы только с большой 230 тах хоть оборотов меньше
👍🇵🇱
3:54 зачем там лежит смартфон?
Hi OK
I am deeply sorry, but that grinder motor was not made to be used like a lathe or belt sander. Just keep in mind the grinder motor is not made to work too long, it will get overheated quite soon. More than that, using that grinder as a lathe may over overload the grinder motor and slowly-slowly damage it irreversibly. If I were you I would buy a small lathe and a belt sander instead of killing my grinder motor.
Хаски - это поорода собак.
🙋♂️👍👍👀🇺🇾🇺🇾🇺🇾🇺🇾
Это КИРДЫК....
器械かった方がいいのがよくわかった ほんとは持ってんやろ!w
俺には無理 買う。
Тогда продай😂🙄😂🙄😂🙄
DIYだろうが本職だろうが道具をとっかえひっかえすることはよくあるよね。道具A→道具B→A→C→Bみたいに。だからドリルでもグラインダーでも良く使う道具なら1台では足りなくなる。ワンタッチの刃先の交換でさえ時間を惜しむ。たまに使う道具ならセッティングの時間をかけるのもありだろうけど、たまのために道具自身を作る?作った道具が売り物を陵駕するのならすばらしいけど私にその自信はない。コスパ的にももったいない。ホームセンターやアマゾンで売ってるなら買えばいい、カネがないならヤフオクやメルカリもある。買わないで!というタイトルに「何かあるのか?」と思ったけど、見たら工作自慢だったw 見た人のほとんどは技量的にあなたの真似をできないし、失礼だが真似をする気も起きないと思う。
Why bother showing us painting scenes i.e. RUclips fluff?😢
Блин, что это за издевательство?