3 Simple Woodworking Tools Hacks | Tips & Tricks
HTML-код
- Опубликовано: 13 июн 2024
- Easy to carry, simple and convenient jig.
Circular saw
Brand:Makita
Model Number:KS511DZ
Drill driver
Brand: Makita
Model number: XFD11ZB
Jigsaw
Brand: Bosch
Model number: PST1000PEL
Angle Grinder
Brand: Makita
Model number: GA402DZ
Epoxy Putty
Brand: Cemedine
Model Number: HC-115
Iron (Thickness: 4.5mm) - Хобби
тот случай когда имеешь сверлильный станок и при помощи него делаешь из шуруповёрта сверлильный станок
Есть места, куда со сверлильным не подлезешь!
That jig for the router, jig saw, and circular saw was on point you may want to start selling them I'd buy one if I seen it in the store.
me to👍👍
Easier said than done I think as the positions of the holes probably vary depending on which type of circular saw/jigsaw and router you have
素晴らしい! 各工具メーカーが純正オプションで最初から用意していても良いくらい。
アイデアだけでなく、実現した物の完成度もとても高いですね。
勉強になりました。参考にさせていただきます。ありがとう!!
動画を見てくれてありがとうございます!
僕も純正オプションであってもいいように思います。
実際使ってみて使いやすかったのは丸鋸の治具です。とても簡単なのでぜひ作ってみてください。
Definitely the 3 in one and I could see my self using the angle grinder to make a straight zip cut. Awesome tips
I think best was the multi tool square/jig. Angle grinder attachment seemed like I wouldn't use it too often if at all. Drill press slide block also seemed a bit of a hassle to go get to put on and keep that squared up piece with it.
Over all pretty neat ideas, just practically for myself I don't see myself utilizing all of them.
That tip for using epoxy putty to make a custom connection was my best takeaway.
This is incredible! I’ve always wanted to be able to do this kind of stuff (like a real life ’McGuyver’). Awesome!
Fantástico trabajos muchas gracias 🤩🤩
The sound of the crickets is so fitting
Top Tools danke da für Gruß aus Deutschland Thomas
Vielen Dank, dass Sie sich das Video angesehen haben.
so einen Aufwand ,um ein paar Löcher SENKRECHT in ein Brett zu bohren.Einen schönen Gruss noch an diese Theoretiker! 🏹🔧🔭🔬🛐
Very smart ideas! Thank you.
Круто использовать для разметки готовый угольник, а сам рез проводить по самодельному деревянному👏👏👏
I love people’s ingenuity
Absolutely mad! WOW
All three are excellent, but the 3-in-1 square is a thing of beauty 🤩
2M views in 1 month? Of course!!!
BIG brain )) thank you for sharing.
Like1,..,.
영상 잘 보았습니다! 또 오겠습니다!!,.,.
감사합니다.
Genial proyecto 👌 felicitaciones.
I admire your skills. Great video.
I just love geniuses and it will only take me 30 seconds to forget everything I saw here except the overall knowing that this person is a lot smarter than me and that's cool. Done went and lost my neuroplasticity a long time ago. Nothing left but brain sand, some good ideas, and some memories. :D
👍 I like videos in this style with no narcissism & no RUclips fluff! Hope all your videos are like this?
materialisation of beautiful thoughts. thank you for sharing
I am glad to hear you say so. Thank you for watching.
Liked the ideas presented here, very much. Will replicate the tools and apply in my future builds, tnx
So nice. THANKYOU!!!😀
It's Simple is best.👍
Great hacks as usual :) good job
Thank you so much!
Vous êtes un grand artiste 🎉
Cross-Jig is most effectively. Simple and useful.
Great video, well done Bro🙌🙂🤝🤝🤝
Thank you so much!🤝🙂
Very good. Outstanding!
all good ideas and well-executed
Спасибо за идеи, дружище!)
Спасибо за просмотр!
Que bien. 👍
Bravo 👏 👏 👏
J'ai aimé la troisième idée avec la défonceuse, supet 👍
Smart use of a spring
Great tools and hacks - Thank you for the video. (liked + subscribed)
Greetings from sw-germany (middle europe)
Thank you for watching the video. From Japan.
Muy buenas ideas 💯💪🇲🇽 pendiente de tus vídeos.
Super sympa merci pour les vidéos 📹
Merci !
Wow! Super very good! Sei bravissimo!
Thank you so much!
Блин, у тебя инструмента на миллион, ты с его помощью делаешь какой то колхоз, который даже потраченного времени не стоит.
Excelente video, pero debo decir que nunca supe que existiera la guía 3 en 1, me fascinó. Saludos desde Argentina!!!
電ドリはメーカーが上部が平らなデザインの物を出すべきだな
Как всегда на высоте 👍
Спасибо.
Ole.....sencillo y práctico al 100%
Толко чтобы заделать эти инструменты, нужны все инструменты))))
素晴らしい。マキタの製品開発の参考にして欲しい。
ありがとうございます。軸と平行のガイドをオプションでつけてほしいですね。
Lovely stuff
Gracias por su video
Very Good!
Thank you!
Very cool. Ever make with epoxy putty a 20v battery adapter to other 20v tool?
You know you’re dedicated to the jig when you make it out of figured walnut!
Probably scrap wood from another project. But it is fine as
Top demais Deus abençoe muito obrigado!
Obrigado!
Amazing!
Thank you!
スゴイ! グラインダーの治具を 0年始の時間使って作ってみたいです!
Impressive 👍
Hola. Gracias por el video y la escuadra de carpintero que modelo es ? Me gustó.
Bravo!
Good job.bro.
Thank you so much.
Curti os guias
Can u use other putty on tools too?nice videos .greetings from Greece
За уголок спасибо.
Спасибо за просмотр.
More efficient tools equals carpenters doing more work for the same money
A video about simple woodworking hacks, and the first one is about how to cut metal. You couldn't make it up.
I would not recommend removing the guard on the angle grinder. Those safety measures are there for a reason
So is the guard on every other tool, it still gets in the way sometimes.
Some types of wheels only fit with the guard off
The most important piece of safety equipment is your brain (not the guards). With enough brain power and care, you can perform certain tasks without the guard. If unsure, yes, keep the guard on!
Это реально круто. Сохраню в "избранном" и когда - нибудь повторю. Спасибо!
Totally amazing! Where do you have the plans? I would buy the plans.
Merci et aussi un grand merci pour la très belle qualitée de l'image 👍
Je suis heureux d'entendre ça. Merci !
I think they are all but what I want to know is what is that putty you use, I haven't seen anything like it here in Australia.
Chuẩn 👍
Your vice needs to be on something solid. The thin sheet metal bench top is sucking up half the impacts of your hammering doubling the work. The multipurpose cross shaped guide is interesting.
I once tried to drill a hole in one of those gear clamps and when the bit got caught up, the clamp spun quickly and just about removed my finger.
I now clamp them before drilling.
Thanks for those tools. What the sizes of the boards for the 3in1 ?
Looks like 10-12mm but anything a little stiff should work fine. (That's what she said)
Zoom in when he uses the calipers and the larger board is 3 inches wide; the smaller one is 2 inches wide. I would make the larger board 16-18 inches long, and the length of the shorter board is determined by the width of the larger board plus the width of the base of your circular saw.
cool
Gold hands! What is the thickness of the steel strip in the first part?
Thank you! The thickness of the steel is 4.5 mm.
that soft gray plasticine which then hardened what product would it be?
Круті поробки
Builds homemade drill press then proceeds to use actual drill press😅
What part of an angle grinder is a woodworking hack?
Genial
Are these the finger removers??
Иметь столько инсрумента, и делать вещи которые изредка понадобятся. Когда нечего делать, придумывать хрень. И про кота тоже.
Неужели в Японии так плохо с направляющими шинами? Могу дать ссылку на качественные российские .
Link?
№3 !
8:44 that drill spins so fast, that you can't even see it.
Same as the frame rate of the camera, or a multiple or even fraction thereof.
@@keithmillard2527 no I rather believe that drill is powered by black magic / dark energy.
Доктора Дью бы сюда... Он бы пояснил за самоделки
見た目はシンプル作りはコンプレックス
Чтобы сделать три простых инструмента, нужен автопарк инструмента.
Есть такое, но последняя идея супер, сделать легко и реально пригодится при постройке чего угодно
круто.
Спасибо.
Never wear gloves when working with an angle grinder.
Странно, что у него 10 пальцев) !
Збс. Благодарю. Усть Лабинск
👍👍
Видимо не говорили на уроках труда что загибать нужно в сторону неподвижной губы на тисах.
Тисы убьешь очень быстро.
Did anyone catch that he already has a drill press
skill
доктор дью признал эти самоделки полным гавном когда это ещё не было мэйнстримом... с подключением, о "великий" диайвайщик
Лобзик по направляющей это бред. Может какой дорогой обеспечивает более менее парналельность.
Болгарка на одном болле однозначно не будет иметь параллельности. Шуруповёрт интересная идея
🥰🥰🥰🥰👍
👍
How do you treat the cobalt drills 😭😭😂 boy, use cutting oil and wayyyy less speed. You will be much faster and your drill will last forever
🤝👍👌🖐️
Please, may I ask you to teach/Train Me, I have No One, friend.