I have to Say Yasusiro, you sir are awesome not just on this video but all i have watched so far the craftmanship is awe inspiring and the tips as well. you have helped me get back into wood turning and crafting again cheers from Australia.
Although I've come to expect a certain level of ingenuity and ingenious design from Japanese craftsmanship, the creations born from your hand never ceases to amaze me. Greetings once again from Anchorage, Alaska!
Que envidia. Un video muy elegante paso a paso. Queda uno enamorado de toda esa maquinaria. Un taller completo hecho con inteligencia. Saludos a todos desde Cali, Colombia.
Everything about this video is inspiring. Beautiful work. Beautiful ideas. Beautiful collection of fabrication techniques. Learning so much. Great video. Great production. Thank you for your generosity in sharing. Thank you for your hard work in doing so. Much respect.
AS ALWAYS: Very useful ideas and excellent execution sir! Showing your need for adjustment (like the undesirable freeplay of the drawer slides, and how you had to correct it) really says very good things about you, being humble and honest. Keep up the good work and please continue to give us your great inspiration, good ideas and your excellent approach on how to make your own precise, less expensive and practical bench tools from common electric hand tools! A big reverence from Mexico!
I am glad you put it that way. I would like to produce more videos that are easier for viewers to understand. I will continue to do my best. Thank you from Japan!
Great project, I love it and I like the one setup for different machines. A quick release would help some time. Put on the bottom an aluminium u rail so all of the mounting plates will hook in. ( opening to the top) and one wooden knob with thread on the top to secure the plate to the base. This will skip (the where is my Allen key.) A little screw on the back could be your adjustment. But man what a clever idea. Thanks for sharing from Mexico.
I'm a new subscriber. Love your channel. Your commitment to great workmanship is truly inspiring. QUESTION... How many requests would it take for you to carve out time to draft blueprints for this one?
Замечательная идея Универсальная подставка под любой ручной инструмент Таким макаром можно ешё болгарку установить и поставить на неё шлифовальный круг
I'm a mechanical engineer from Spain, and I'm starting learning woodworking. I can see you acuracy, and as a profesional in the mechanical field, I really admire It. First of all, I want yo thank you for the very detailed videos. They are really good to learn diferents process with diferent tools, and always with an objetive! Where have you learnt this skills?? Greetings! Alejandro
I am glad to hear you say so. I was inspired by studying architecture in college and watching various videos on Facebook and RUclips to actually try it out myself.
Hey Alejandro! Resulta que yo también soy un ingeniero, Ingeniero Químico para ser preciso, pero con gran inclinación hacia lo mecánico, y también admiro a este magnífico artesano Japonés y sigo sus videos, y coincido con vos en que su ingenio está muy presente. Te comento que ya quisiera yo tener personas tan ingeniosas entre mis compañeros! Saludos desde México!
A very nice work. Thanks you. My case: I used those telescopic guides for a saw already... they move laterally so much, and they don't hold much force. I decided to change it for a linear bearing.
As always love your work. I'm still trying to get my head around the second adjustment with the angle bar, is there play in the connection between the board connecting the drill to the back plate?
Thank you!!! I don't know if I can answer your question well since I am still learning English, but I have a slightly larger screw hole in the board that connects to the drill. By fixing the edge closely to the angle bar adjusted to the correct angle, it is always installed at the correct angle.
Thanks for watching the video. My table saw is very simple, just a cheap circular saw plate with holes drilled and screwed in place. The fabrication process can be found in my previous videos on the 10-in-1 workbench or the 7 table saw guide.
In my opinion, if we start with the basics such a DIY Drill Press, then the level of construction should not involve multiple tools. The whole point is to be as simple as possible and then build up on that.
@@Sportyg1960 Not sure if this fully answers your question, but he has set it up to use 3 different tools here: 1) Drill (actual drill press); 2) Multi function Tool (a variety of blades for it); 3) An angle grinder (also with various blades that can be swapped out); 4) A router. When he is using the router he has a milling vise under it to allow for very specific tooling of a part. And what it is sitting on, I believe, is just his work bench.
Hello! I bought it from Amazon.com in Japan. The details of the tools and other information are given in the subtitle or description. Micro Compound Table Brand: PROXON Model Number: 27100
I love every one of your videos, hope to make it, but no size shown. For other people, the video can provide detailed size information, I think you can do it, thank you
Sorry, I used to draw plans, but it is time consuming and I only draw rough plans for myself these days. I will only write plans for videos that have a lot of requests.
I have to Say Yasusiro, you sir are awesome not just on this video but all i have watched so far the craftmanship is awe inspiring and the tips as well. you have helped me get back into wood turning and crafting again cheers from Australia.
Almost a year I'm not watching a woodcraft d.i.y video on RUclips. Thanks for this video. Done.. Subscribed you
Although I've come to expect a certain level of ingenuity and ingenious design from Japanese craftsmanship, the creations born from your hand never ceases to amaze me.
Greetings once again from Anchorage, Alaska!
私も似たようなドリルプレスを作りましたが、スライドレールの遊びによるブレが出てくるので、根本的に構造を変えて作り直そうかと考えていました。でも、このビデオを観てそういう解決方法があるのかと感心しました。素晴らしい。是非応用させていただきます。
他の作品例も含め、知恵と工夫で問題を解決するというのは貴方のような方の為にある言葉ですね。素晴らしいの一言に尽きます。
次のビデオも大いに期待しています。ありがとうございました。
そのように言っていただけると嬉しいです。
とても励みになります。
どんどんアップロードするのでまた見に来てください。
ありがとうございました。
I am so happy I have found you! Thank you so much for the wonderful video and brilliant work!
Que envidia.
Un video muy elegante paso a paso.
Queda uno enamorado de toda esa maquinaria.
Un taller completo hecho con inteligencia.
Saludos a todos desde Cali, Colombia.
Everything about this video is inspiring. Beautiful work. Beautiful ideas. Beautiful collection of fabrication techniques. Learning so much.
Great video. Great production.
Thank you for your generosity in sharing. Thank you for your hard work in doing so.
Much respect.
The way you do it is very good, very creative,
AS ALWAYS: Very useful ideas and excellent execution sir! Showing your need for adjustment (like the undesirable freeplay of the drawer slides, and how you had to correct it) really says very good things about you, being humble and honest. Keep up the good work and please continue to give us your great inspiration, good ideas and your excellent approach on how to make your own precise, less expensive and practical bench tools from common electric hand tools!
A big reverence from Mexico!
I am glad you put it that way. I would like to produce more videos that are easier for viewers to understand. I will continue to do my best.
Thank you from Japan!
Excelente idea, tendremos q repetirla todos los interesados, muchas gracias.
Great project, I love it and I like the one setup for different machines. A quick release would help some time. Put on the bottom an aluminium u rail so all of the mounting plates will hook in. ( opening to the top) and one wooden knob with thread on the top to secure the plate to the base. This will skip (the where is my Allen key.) A little screw on the back could be your adjustment. But man what a clever idea. Thanks for sharing from Mexico.
Woooow amazing dude. Congratulations. God bless you always.
Thank you so much!
Your channel is a work of art, it's a beauty to watch and inspire myself, thank you and God bless you.
Hhgh PP
muchas gracias por enseñarnos tan detalladamente, la construcción de todo estos accesorios.
Absolutely fantastic work well done.good luck from Ireland ❤
I don't know why, but it's amazing! We support you in the future! Yasuhiro TV!
I am grateful for your support!
very carefully planned and executed, nice work
Thank you very much.
I'm a new subscriber. Love your channel. Your commitment to great workmanship is truly inspiring. QUESTION... How many requests would it take for you to carve out time to draft blueprints for this one?
また一つ最強アイテム増えましたね🎵
完成度抜群👍
まだあまり試してないですが、便利な最強アイテムかもしれません😁
コメントありがとうございます
なんだ、ボール盤か。
そんな30分前の失礼な自分を張り倒してやりたい。
マルチツールやトリマーをボール盤になんて
まったく考えたことがなかった！
しかも凄い精度！ハンドル製作時のホゾ穴の隔ての薄さにゾクゾクしました。ツールの刃って結構硬いとはいえ
全然逃げないのには感服です。
他にもボール盤に装着できる工具はないものかと
フワフワと考えてみたのですが、何故かハツリ機が
頭に浮かんでしまった自分の阿呆さ加減が
今回の作品の素晴らしさをより痛感させてくれました。
あと、マルチツールの刃って動画だとあんな風な
蜃気楼みたいに映るんですねー。おもしろい。
動画を見ていただきありがとうございます。
精度が予想以上で私も驚きました。
振動でブレる可能性があると思いながら製作しました。もしブレた場合には緩衝材や伸縮性のバンドなども用意していましたがその必要がありませんでした。
くねくねしておもしろいと思いながら撮影しました。
Amazing design, and build!
Well done!
Замечательная идея Универсальная подставка под любой ручной инструмент Таким макаром можно ешё болгарку установить и поставить на неё шлифовальный круг
با سلام وعرض ادب احترام بسیار عالی وحرفه ای بدون نقص سپاسگزارم
Mesmerizing design and assembly!!!
I congratulate your for this beautiful work.
I deeply respect and admire this project,
Hello
That encourages me a lot.
Thank you, too, for your creativity!
Nice work yet again. We shared this video on our homemade tools forum this week 😎
I'm a mechanical engineer from Spain, and I'm starting learning woodworking. I can see you acuracy, and as a profesional in the mechanical field, I really admire It. First of all, I want yo thank you for the very detailed videos. They are really good to learn diferents process with diferent tools, and always with an objetive!
Where have you learnt this skills??
Greetings! Alejandro
I am glad to hear you say so.
I was inspired by studying architecture in college and watching various videos on Facebook and RUclips to actually try it out myself.
Hey Alejandro! Resulta que yo también soy un ingeniero, Ingeniero Químico para ser preciso, pero con gran inclinación hacia lo mecánico, y también admiro a este magnífico artesano Japonés y sigo sus videos, y coincido con vos en que su ingenio está muy presente. Te comento que ya quisiera yo tener personas tan ingeniosas entre mis compañeros! Saludos desde México!
Absolutely love what you are doing ❤️
A very nice work. Thanks you. My case: I used those telescopic guides for a saw already... they move laterally so much, and they don't hold much force. I decided to change it for a linear bearing.
Amazing work 🤩👍
Yasuhiro büyük saygı duydum. Bana da ögret bu işi usta🙏.
Muy Buen Video ------ *¡¡¡ BUEN TRABAJO !!!*
Real life MacGyver!
Real project,, idea brilliant
Thank you!
This is the BEST. Thanks
another amazing project, chances to have the plans published?
Мастер от Бога!
Hello Yasuhiro, I'm amazed by your work and would like to build this tool for myself. Would you mind sharing the plan please? Thanks.
Dude sweet! That's totally gonna be a thing now.
Thank you so much!
Brilliant use of oscillator
Brilliant! I wish I had the necessary experience/nerve to try these, but I am not ready yet, not by a long shot. Great builds though.
Please do you know what the tool is under the drill press
Excellent 👍👍👍👍👍👍
Love your work!!
4:02 The rail was playing because 3-piece drawer slides have the leeway to pull the entire drawer box out. 4:38 And it's still playing.
Great Work!
Is there any chance to get the plans?
A very nice idea i like
What was the device used to move the work piece around under the router? Thank you for another excellent video!
very talented
Excelente trabajo, se puede ver los planos o medidas d los materiales? 👍👍
you are an excellent woodworker ......can you help me to get an original of ryobi saws ?
As always love your work.
I'm still trying to get my head around the second adjustment with the angle bar, is there play in the connection between the board connecting the drill to the back plate?
Thank you!!!
I don't know if I can answer your question well since I am still learning English, but I have a slightly larger screw hole in the board that connects to the drill. By fixing the edge closely to the angle bar adjusted to the correct angle, it is always installed at the correct angle.
@@YASUHIROTV that makes complete sense. I’m itching to try this build
excellent dear❤
Thank you so much!
좋은 하루되세요 또올께요~
Brilliant!!
Gracias por compartir conocimiento, es bueno, no logré entender cómo lo ajustó para que diera escuadra el taladro.
Outstanding!
i like four videos you frend thanks tutorialnya kren salam satu hobi
Hi there, you are using a very unique diy table saw. Would you share the way you built it?
Thanks for watching the video.
My table saw is very simple, just a cheap circular saw plate with holes drilled and screwed in place. The fabrication process can be found in my previous videos on the 10-in-1 workbench or the 7 table saw guide.
Забавная какая розетка с bluetooth.. Респект из России !
26:48 Another youtuber JSK Koubou had put on a bicycle handle and with the brake lever and wire operated the drill
Класс. У вас есть чертежи . Хочу сделать из дрели сверлильный станок.👍
Super Ideen!
Cool 👍
bhai fbr tex kesy pay kren or kesy pta chly ga k hamra Kitna tex hai
In my opinion, if we start with the basics such a DIY Drill Press, then the level of construction should not involve multiple tools. The whole point is to be as simple as possible and then build up on that.
Merci beaucoup pour la vidéo
Merci pour votre commentaire.
Perfect!
Thank you!
Hello! Interesting ideas and videos! Tell me what is model of your end saw please? (модель торцовочной пилы Макита)
Здравствуйте! Большое спасибо.
(Я немного не уверен в правильности своего ответа...)
Митерсальная пила LS0612FL
Hello! This is what I asked, thanks!
Hello. I really liked your video, please attach the file with the drawing blueprints
Great Video! Would it be possible to make a holding bracket to use this with an angle grinder?
What is the tool used under the drill press PLEASE ANYONE HELP
@@Sportyg1960 Not sure if this fully answers your question, but he has set it up to use 3 different tools here: 1) Drill (actual drill press); 2) Multi function Tool (a variety of blades for it); 3) An angle grinder (also with various blades that can be swapped out); 4) A router. When he is using the router he has a milling vise under it to allow for very specific tooling of a part. And what it is sitting on, I believe, is just his work bench.
I am wondering what is the use of Mobile phone on table ?
21:36 ooh , ok got that 😅
فديوهاتك روعة لكن بالرغم من أنني مبتدئ احتاج المقاييس بالسنتيم وتشكر
Hello sir.
Ibwould like to know where I can buy a tool/guide like thebone you use at minute 23.50
Thank you and great job
It's a PROXXON precision machine vise I think
Hello!
I bought it from Amazon.com in Japan. The details of the tools and other information are given in the subtitle or description.
Micro Compound Table
Brand: PROXON
Model Number: 27100
Do you have a pdf plan with dimensions?
I love every one of your videos, hope to make it, but no size shown. For other people, the video can provide detailed size information, I think you can do it, thank you
Great...
Big question is... can we get plans for this?
Sorry, I used to draw plans, but it is time consuming and I only draw rough plans for myself these days. I will only write plans for videos that have a lot of requests.
This plan is necessary for me, too😊
Please PLEASE TELL ME THE TOOL YOU’RE USING UNDER THE DRILL PRESS IT’S GOING BACK AND FORTH SIDE TO SIDE WITH THE HANDLE PLEASE ANYONE TELL ME
2 axis vice
Pourquoi pas de detail de mesure et autres?
xem cách bạn làm hay đó
🙏🙏🙏
10/10
Como fazer um slide
今じゃ木材の方が価値が高いまである。
緑色の中国製のドリルスタンドが安くて良い。
👍👍👍💯💪🤝
Minuto 14. la cinta velcro para sujeción, no me convence nada...
Muy interesante y bueno,pero el idioma no ayudó.
쓰바라시~!
Applausi!!!!
Söze gerek yok!
👍🇵🇱
👍jp
Hi OK
👍Jos...
ini gais ada video pemasangan tulang kapal kayu berat 👉ruclips.net/video/Rxu2mpK7yfQ/видео.html
Включение конечно не очень надежно и безопасно
Розетка с bluetooth впечатлила
Look to Matias Wandel channel. Pantorouter
looked a bit cheap.............🤨🤨
Why a mask?
sawdust?
A very nice idea i like