My Haswell i7-5930K went funny on me for years. First I tought it was windows itself because I got all the blue screens of death I knew, 6 or 7? But with a fortunate glance at HW monitor I saw my CPU dived to down 225 Mhz sometimes all of a sudden. So I patched it by leaving it in a permanent overclock for years on. Than beginning this year a Windows update seemed to fixed the problem. Wierd stuff. I think it the cache of the CPU was corrupted? (And the temperatures were fine under the Noctua cooler all the time)
Brian - your LGA socket has Pin Misalignment problems. Check your video at timestamp: ruclips.net/video/_W0r95MNOow/видео.html I have had this problem before. Sometimes re-seating the CPU works, sometimes it does not. Tweaking the pin alignment solved the problems for me.
No way. I've been dealing with this problem for months. None of the possible fixes from the internet works. I did clean clean windows install so many times. My laptop was still freezing completely randomly multiple times a day every day. But I replaced paste and now my laptop didn't freeze for week. Thank you so much. You are lifesaver.
I picked up a 3770K and was having similar problems that went away when I swapped to a 2500k. I’ve been puzzled as to what the problem could have been so now I’m definitely going to give delidding and reapplying thermal paste a try! Always love how you fix real world problems and not just slapping new parts together! Enjoy Japan and seeing your son! Well deserved.
Do you think it's possible that it could have been fixed by the fact that the CPU was re-seated and made better contacts with the pins on the motherboard?
@@techyescity People need to look back over you videos, they would know you'd already have administered Tech yes Lovin to the board and so it had to be something more unusual.
@@techyescity Ah ok. That is one bizarre issue then. I'm glad that you were able to figure it out. Thank you very much for your reply! Keep up the great work!
I've had an intersting issue with an HD 7870 lately; it was crashing and artifacting at stock settings. But when I bumped the power limit to the maximum, it was completely stable.
Ive had 2 gpus a r9 290 and a gtx 780 ti where the middle powerstates became unstable Fortunately that generation of gpus can be biosmoded and i was able to raise the voltage for those middle core states. You can probably do the same with yours. I believe there are also boost and non boost bioses for the 7xxx series. My 7950s where alot more stabe on a overclocked non boost bios. Look for gpus without the ghz edtion moniker and then look for those bioses on tech power up. As allways your milage may vary
Had similar problems, cleaned the whole pc removing dust and then spraying the wd-40 multi purpose spray then reinstalling Windows got the work done. I think the cpu and motherboard were overheating, the north bridge radiator had one screw unscrewed and the cpu thermal paste was pretty dried out. Thanks Bryan for that great content full of good IT knowledge. You make the unrepairable possible to repair :)
I've been having random bsod's for a year now, mostly after starting up and reaching my desktop, never while gaming or having my pc on for long. First video that gave me some real insight, gonna try this out and hope I finally fix this mystery. Thanks!
A part of the CPU die was overheating where the temperature sensor wasn't present. Maybe a cache or something and since it was overheating it would throw out errors when accessing it
was having the same issues (was getting Event ID 18 WHEA logger errors) with Ryzen 5 3600 setup; randomly restarting on game launch and the CPU is fairly new. so far what has 'fixed' it was setting the BIOS to default, reflashing the BIOS firmware starting from 3 back then one at a time til up to date. also had to rollback the graphic driver to an earlier one. stopped using DOCP RAM settings and just set it to Auto in BIOS. to me it seemed like Asus BIOS updates wasn't playing nice with AMD graphic drivers and any kind of OC tweaking only made it worse as far as RAM goes. like you say temps were normal.
It's probably a good thing that if anyone got a problem that's rare that it's someone who can actually make it aware to more people just in case someone else has the same issue. I know that I am nowhere near advanced enough to delid a CPU. My last pc that worked until February this year (the parts still work but I basically built a new computer and I'm currently using the GPU that was in it as a placeholder) was experiencing random shutoffs under normal temperatures (although my CPU had idle 78C before I cleaned my pc out and fixed some of the fan orientations but it didn't help). Before I replaced the HDD with a SATA SDD (one of the two parts that survived into the new build) I kept getting blue screened when I'd try to run a particular game. That didn't happen after I installed the new SDD but I would still get random shutoffs even under normal temps and one happened to be when I was restoring my image to the new drive. I ended up chalking it to aging hardware and just building a new budget PC. Of course I ended up kind of overspending (while at the same time not because of a gift card) on a new PSU thinking that was the issue at first but at least the PSU and drive found their way into the new build.
I had a troubleshooting nightmare recently. My fiance's i5 8400 rig started crashing all the time. Figured out that the CPU wasn't stable at stock voltage anymore. First time I've ever had a degraded CPU. I'm just hoping it works for a good while with the adaptive voltage bump I gave it.
I had my system, a Dell Desktop XPS 8940, 32 Ram, 8 Gig NVidia 3060 RTX Ti, for over a year without any problems. I always did my updates from Dell. My last update from Dell included at least 15 various upgrades. The update went smoothly, then a week later the system would shut down randomly without warning, I could be logged in for a minute, 15 minutes, or an hour, then crash. I resolved the issue by running sfc / scannow at a command prompt while logged into Windows, then chkdsk /f /r via a command prompt in windows, the next time you reboot the computer, chkdsk will run a repair the system. this worked for me, good luck.
I have a i7 2600k with 32 Gb Ram with a Intel Extreme Dp67BG Motherboard and a rm1000x corsair psu and I've ran into random shutdowns recently. I have ran multitude of tests , first memtest64 , then cinebench r23 as well has hwinfo checkup on cpu , gpu and motherboard temps ... with a mix of gpu cpu loads . The conclusion - I have two Gtx 1070's and sometimes they cause a random shutdown ( though separately they work 100% and all slots also work fine ) I have found that If I use the second and first gpu at the same time it gives problems and shut down but if I only use one at a time it still works fine - I still cant find a solution to this but I manage to work around it ( also SLI works fine with no crashes weirdly enough but separately working has random shut downs) and I have used 4 gpu's off the 1000 Watt psu before with no Problems so its not the power supply . Recently I had some random shutdown for a different reason popping up and it was one of my ssd sata data cables causing the trouble.
I upgraded from an i7 3770 PC about a month ago. I've been running my socket 1155 computer since I bought it new as a prebuilt in 2012. I'd upgraded it a lot over the years but realised that sooner or later it would fail me and probably at the worst possible time. So I bought a new AM4 motherboard, Ryzen 1700, 16gb of ram along with a new case and put my GPU, PSU, fans and SSDs into the case. After watching this video I'm really glad I made the upgrade.
Oh my gosh, I didn't know there was thermal paste also inside the CPU, so, replacing only the paste ON the CPU each year has no so sense if we don't replace it also IN the cpu
I just ran into this issue on my AMD Ryzen 5700G 32GB DDR4 system. It is a MinisForum mini PC, that packs some punch. It was working fine, then moving into a new office, it all seemed good... until gaming. Standard operations worked fine, movies, browsing, office work, even simple 2D games... it was just 3D gaming where I would get an unexpected reboot, error 41. I reinstalled my OS and some games, and of course, ensured that the OS and Device Drivers were current. Same issue, reliably. When the 3D kicks in, it reboots. Temperatures are all good 50-60C. Well, long-story short (too late), I found out that I just had too many devices plugged in to my power connections. It wasn't an issue with my PC at all, not with the hardware, not with the software. The PC was unable to pull the power it needed for that type of processing, so it rebooted. I plugged in just the necessities into the surge protectors and it is all 100%. Thanks for your thought process here. It got me on the right track, though it was a different cause than yours. Have a good one!
This been pretty interesting. I got a simular problem with an Amd A8 a while ago. The PC kept shutting off and rebooting randomly. Already cleaned everything up (mobo ram and cpu) but the problems stayed. I might try delithing the cpu and see if I can replace the paste on the die itself. Thanks for the vid Bryan, and enjoy your stay in Nippon ;)
I have that same problem at present. It's an HP Pavillion 510-P127C with the AMD A12-9800 that I'm trying to fix and flip and I've checked the ram and took the CPU out and put it under magnification to check for bad pins and cleaned and repasted it. It still crashes with BSOD cycling on Windows startup, while using Heirens recuse USB and even in the BIOS screen. My next step will be to replace the PSU with a known good one and see it that's the trick.
My PC keeps crashing on me when i play a game. I don't know what is really causing it. Even though I updated my PC as well as my NVIDIA graphics driver, the problem still lingers. Is there a way to fix this?
This informative video is why I subscribed to this channel. I have that same problem at present. It's an HP Pavillion 510-P127C with the AMD A12-9800 that I'm trying to fix and flip and I've checked the ram and took the CPU out and put it under magnification to check for bad pins and cleaned and repasted it. It still crashes with BSOD cycling on Windows startup, while using Heirens recuse USB and even in the BIOS screen. My next step will be to replace the PSU with a known good one and see it that's the trick.
12:01 so I had a weird thing happen just upgraded my pc and it was working good for a week but then got a new ram stick to help it’s fully compatible with my pc but playing world of Warcraft for a couple hours the pc would randomly shut down fully and I would have to manually turn it back on and it would work for a hour again then shut down again any ideas??
Really strange issue for me (i'm a 25+ year tech to boot) SUPER intermittent my display would go black , system would be running and I could shut down and recover. I could go MONTHS with no issues. Then I would get the same issue but when I rebooted I would get no video at all. system would boot and I could shut it down fine. Again weeks or months between issues. Then about a year into this it started to get much worse. I really thought it was my 3070 (hence why I was babying it so long) but after some real troubleshooting and a new motherboard, it turned out to be the power supply. New 750w 80+ Gold and no issues since. I was going to get a new Card when I decided to try the PSU (had an old psu) Never would have though.
Yes, be careful of assumptions. As a computer techie you at least have components to swap out. I had terrible problems with my first PC and sent it back to Viglen who said they'd fixed it and sent it back to me. In the end it was a loose molex connector pin on the main hard drive. Simply squeezing the sockets with some pliers to tighten them up sorted it out.
Similar issue - after many many tries it got fixed after updating the SSD firmware. I had no idea that this was even a thing. A friend of mine still doesn't believe me and taunts me to this day.
I remember getting so frustrated trying to solve this in my pc for days I ended up changing the power supply swapped the GPU and then I realized the tv had something wrong with the hdmis never in my life did I expect those symptoms from a bad tv 🤦♂️
I can't tell from the video, did you replace the adhesive on the cpu or did you leave it like that? Also off topic, since you dabble so much into second hand markets, how do you select reliable PSUs to put into builds for PC's that you are going to flip, so that you have peace of mind that it won't explode the second it goes into the customer's hands
i got my first pc 4 month's ago and i have not had 1 solid session with it. it will give me this weird crackling audio(which i cannot find another video that talks and give an example of) at the same time will make my game stutter hard, fps drops and eventually it will just restart itself. weird thing is is that i took it back where i got it built and it worked fine? passed all the tests and didnt shut off or stutter 1 time?? then the next day i plugged it in and it worked for like 5 hours then it started the whole bs again?? im sick of pc already
My Haswell i7-5930K went funny on me for years. First I tought it was windows itself because I got all the blue screens of death I knew, 6 or 7? But with a fortunate glance at HW monitor I saw my CPU dived down to 225 Mhz sometimes all of a sudden. So I patched it by leaving it in a permanent overclock for years on. Than beginning this year a Windows update seemed to fixed the problem. Wierd stuff. I think it the cache of the CPU was corrupted? (And the temperatures were fine under the Noctua cooler all the time)
Would you have any idea what a critical kernel power error is shows up in event viewer after my pc reboots just sitting at desk too had a pc store stress test and it passed everything get it home it sits for 2 hour and does it please help
when I was fine tuning the overclock on my X58 X5675 @4.53Ghz, DDR3 @1969, North Bridge Clock 3740.9 MHz it would BSOD and rightfully so, but it got to the point where everything was working great except Fortnite would crash and BSOD, so I used DDU and clean installed the Nvidia driver and that fixed the problem
Had a similar issue with my pc crashing、but it started crashing so frequently that it would turn the pc off instantly after loading Windows。Turns out the gpu was the issue。Every pc I put the gpu into、 would get it's drive corrupted to a point were I would have to re-install Windows、since Windows repair wouldn't work。I wasn't able to resolve the issue because I couldn't go into Windows recovery mode and all hardware fixes failed。I tried cleaning it、new thermalpaste ect and the gpu was visually in good condition but in the end I had no idea what the issue was。The gpu was a gtx 970 from EVGA。
Whenever i turn on my PC, my file explorer keeps on launching for no reason at start up. Till this day i don't know how to fix this, can you please give me advise on how to fix this issues
My laptop giving BSOD when I playing game for around 5 to 15 min, i use heaven benchmark i notice that when cpu hit 85c° it's giving bsod but i tried to stress cpu it didn't give blue screen so there's anything that can fix it ?
Dang I had the same critical process issue too but I believe it was the alien ware software but maybe the heat spreader paste is mucked too so worth a shot for future issues lol.
I have a very similar issue with a computer I built myself. It works great and goes days without issues sometimes even weeks but randomly the screen will go black and the computer crashes. The only thing is the tower is still running as if nothing happened. If I power off the computer and boot it back up then it works perfectly fine until the next random crash which could be a few hours or again weeks. Besides trying to replace parts are there any tips on where I could start troubleshooting this issue. I never get the Blue screen of death. No other issues with the computer. No specific activity causes the crash. Sometimes happens while watching youtube or even just typing on a google document.
@@jonationnougat9785 Not yet, still need to take my cpu out and reseat it, but I keep worrying Ill destroy my computer. Rather just deal with the random crashes since they really don't happen that often.
Thank you so much for this video, my pc would for some reason crash when playing fortnite and other games, and thanks to you, i finally fixed it and it doesn't happen anymore!!
Re. SSD's - if you're someone who does a lot of video and/or audio editing you can wear out them out in months. Perhaps surprisingly, audio in particular - 24 bit, high sampling rate files can be huge and editing software will often create multiple undo copies. I'm not a pro but I do a lot of work meticulously digitising and restoring analogue audio, and a few years ago saw a new 500GB drive drop to 98% *in less then a month* (using a small temp/scratch disc of two older, 90GB SSDs in RAID 0 and an HDD as the destination for the completed projects). Until then I had no idea that write endurance was so much lower than older generations of SSD. People used to fret about it 10 years ago when NAND had 3000 writes-per-cell endurance (like the two I just mentioned - both 10 years old, my system drive for nearly 8 years but still at 98%), yet consumer drives are now *a tenth* of that (but certainly aren't usually typically 10 times the size). I now use three SSD's (two 500's a 1TB) which I bounce data between when editing (along with several offline HDD's for archiving) and keep a wary eye on usage.
I've had exactly this problem with my Thinkpad T430s (with I7-3320M), ever since I bought it in 2012. I never found out what the problem was. Same thing with a second-hand Ivy Bridge HP Desktop, which I tried to use as a media center PC with Ubuntu. They just gave me a nasty look when I complained that it sometimes reboots itself and told me they can't reproduce the issue. I also had similar issues with an Ivy Bridge HP laptop. My two Haswell desktops never had this issue.
I was so excited with my new build and I’ve tried everything I can think of, including turning off all the ASUS and Intel “tuning features” ….. unbelievably depressing… can’t afford to buy new parts to swap…. Really shitty… …and this de-lidding thing… unfamiliar and uncomfortable with trying and ruining my chip and board if they aren’t already somehow.. yea, this is my worst nightmare… no clue what to do… My parts are new gen, too… not even remotely replaceable
I think it was the reseating issue only, I had a FX 6300 that somehow managed to bend a pin (later it broke while trying to straighten it but it was not an important pin luckily), this bent pin put a scratch between 2 cpu socket pin holes and I started getting weird BSODs esp. regarding RAM which were otherwise working fine, figured that due to the scratch maybe the other CPU socket pin hole was getting short, just carefully reseating the CPU would stop the problem
i have a pc that has completely new everything, except the gpu. the pc will run completely fine all day, i can remote stream my xbox through it, no issues. if i try to play any game on it, even some not so graphically intense, it completely shuts off as if i hit the power button. temps are not above 75c on cpu and around 80 on gpu. i have a Radeon RX 480 8gb, 750w psu, intel i7-11700kf, 64gb ddr4 ram and windows 10 64x. All drivers and system are updated. im thinking its in the gpu because its the only used part but i do not have a new one to test with? any ideas?
I've had the strangest problems occur recently.. my pc has been running great for about a year and a half, I upgraded my gpu about 3 months ago.. I had a windows update that caused my pc to crash when playing games and one of the crashes was so bad that it corrupted my user profile.. I fixed well thought I fixed it finally after wiping all the graphics drivers and starting fresh it ran great for another week and now it's doing the same thing again.. im almost wondering if it's cpu related I have a ID liquid aio and i always felt the the cpu temp was a little higher than it should be.. I appreciate this video cause it's got me thinking maybe I have worn out the cpu with bad cooling over the corse of a year and some change
Windows Memory Diagnostic Tool did not find any problems with my brother's 16gb ddr4 kit, he continued using the machine with all kinds of problems for months, got so bad he just couldn't use the machine for more than 5 minutes without a bluescreen. He gave the machine to me, I ran the same test, no problems, then I did a memtest86, and ERROR ERROR after less than a minute into the test. The memory was faulty, replaced under warranty, system worked fine after that. Do NOT trust Windows' memory test if it says your memory is okay.
I had the same thing happen and, at first, even memtest86 didn't detect the fault in my RAM. But I suspect it was a batch of faulty controllers the mfg used on the modules and would occasionally just stop working. If the controller stops working then Windows can't even give you a BSOD like it does when the memory gets corrupted. The screen just goes blank. it is as though you simply reached in and pulled out the RAM while it was running. Yours probably had bad memory chips.
omg. I am having random crashes in my games. Sometimes I spent 2 days without issues and then the whole PC freezes, it disconnects all my peripherals and then the freezing comes. Then I have to hard reset the PC. Sometimes it happens 3 times in a row and then again at the next day. I ran every test, updated all my drivers. But I have been scared of checking the CPU. This is a new pre-built PC with a Ryzen 5700X and I don't want to return the machine.
I have a weird problem in my Xeon system, that suddenly it freezes then starts moving very very slowly than crash, it’s not the psu or the ram it’s either the cpu or the motherboard, ah how should I delid it or that’s not advisable on xeons?
Pc crashing randomly while playing valorant. Sometimes bluecreen, sometimes hang even while using ms word. All parts replaced but that didn't fix. I fixed it by changing the motherboard bios settings IDE to AHCI then save, then formated it with a new windows 10.
I have issue with System with Cpu I try install Windows freezing I try three different motherboards all do the same thing Cpu I have on the motherboard is Intel i7 1000KA any advise welcome
My pc is kinda doing the same thing. Sometimes it handles 3 hours of GTA V and sometimes crashes on youtube. Not driver problem , already installef everything again. Maybe its the same problem ? I changed the thermal paste...
My PChas been doing weird things when my dad just Flipped the cpu and check something but I dont think he moved anything inside. After that my pc started having glitch screens then crashing my pc(no blue screen of death just straight out turns off my pc) but sometimes I have the blue screen of death. Then next thing my monotor cant connect to the pc at times when I open it. Im pretty scared that some of my files might be corrupted if this happens for a while.
My computer was giving BSOD crashes a whole lot about a month ago. Especially when installing games or transfering files to an external SSD. So I reseated my ram first which didn't fix the problem , then reseated my NVME drive. I haven't had any crashes since ten
I keep getting this error after my PC crashes while gaming -amdryzenmasterdriverv27 the system cannot find the file specified-i think this is the reason why it crashes but idk how to fix this
Q- my Pc wont boot to my windows boot hd and when i do it myself its has no name listed on it so i click it and it boots fine but when i restart it does it all over again???
i had similar problems with my old i7 3820. I went into bios and disabled anything referring to "spread spectrum" (whatever that was) and it solved the issue, at least for a while The old Corsair 750w PSU I had apparently was having issues (it's so old it doesn't have a 80+ rating). Swapping the PSU with a new one solved everything, but I still have the old Cosair PSU and it still works, and it seems to work fine on lower-end builds, but I try not to use it for anything long term.
The strangest problem I have seen recently is a Ryzen 7 3700X with a dead memory channel. Dual channel memory installed correctly and the system did not post. Single stick installed and it booted. dual stick installed incorrectly booted but with bios warning of memory installed correctly. Determined it was a bad memory channel on the CPU when I swapped the CPU to a board where memory channels were swapped positions and the problem followed.
Having issues with 10850k 3090. 32gb ddr4. Tried new ram, gpu, and windows. sometimes blue screen, sometimes games just tabout and close. Thought win 11 would fix this along with the alternative gpu, and, ram.
damn i have never ever heard that deliding might fix instability issues on stock setup, probably not many people tried fixing it that way either, but it feels like it fixed a symptom and not the root cause, but again im probably wrong but thats a super weird fix, enjoyed the content as always :)
For my personal stuff I only use Samsung M.2's or 2.5" SSD drives.. The Magian software is great and cloning is so easy too. It's worth the extra $20 bucks $50 even on more storage. I was on Samsung on my last PC and that 2.5" 850 EVO and it is still being used for gaming storage in that PC, I am about to sell.. People go on about PSU's n they will buy the cheapest M.2 they can find though and go with what ever that is for a gaming build.. Also I found out with crucial a long time ago that a warranty is only as good as the company it's self.. This was back when SATA SSD's had first came out. I think this was their MX250 or something like that.. Well it went bad and I think back then you only got like a 3 year warranty, on SSD drives. Now a day's it's more like 5 to 10 years.. But anyway it was a 3 year and it had only been out like 10 months, it was their drive clearly from the MX250 on it, and it went bad after like 9 months.. Crucial shipped it back too me in a box dead! Since then, I have only used Samsung Drives and haven't had any issues with any builds since then.. I am just 1 person who made sure at least 10 other people knew not to buy Crucial drives or memory, And that still didn't hurt them.. People out there swear by them..
I have a very weird problem for almost a year now. My pc crashes and boots right back up but the catch is it only does that while on low usage like watching a movie, using just chrome things like that or when idle. Iv tried so many things i cant even recall all of them so damn frustrating...
this same issue is with my oc from past 5 months when i try to watch RUclips or play some light game like c.s 1.6 system restart its self or just it show shutting down and it does not turn on then i press the power button it works just fine it sometimes happen in 1 hour sometimes in half an hour i tried changing thermal paste and when i swap my cpu i saw corossion in the pin not the pin its the intel cpu that golden small holes i tried to clean as much has possible with alcohol pads it works fne till 1 month still same issue please help me i haved tried different rams and i only have a basic Nvidia Quadro nsv 300 card and its new its not the issue rams are good so what is the problem then temps are fine to tired to heat it with prime95
I had a similar problem last year, it turned out to be the cpu cooler mounting pressure was too tight and caused instability or something idk, just loosened the screws a bit and it was fine from then on
That's the risk you run if you try to budget on a cooler. There is something called a plastigage you can use to verify you have the correct mounting headroom on your cooler. It is also possible you didn't install the bracket correctly, or you put gorilla torque on the screws. This is why I have a Wraith Max on my 2600 and a Wraith Prism on my 5600X. Since I undervolt for longevity, they provide plenty of cooling and I don't have to wonder if they fit properly, unlike so many of the aftermarket coolers on the market. They also have a copper thermal interface. It is really just better to fork out the money for a D15 or Arctic AIO if you are going to overclock and stick with OEM coolers if not. Although annoying to install, the spring loaded stirrup clasp on the Ryzen coolers I have is the safe way to go because the spring is designed to provide just enough pressure. At least you know they won't crack the die from too much mounting pressure. And a good thermal compound makes anything more than "enough to be secure" pointless.
I was planning to upgrade my LGA1155 motherboard from a Sandy Bridge processor to Ivy Bridge but after watching this video I will stick with Sandy Bridge.
I had a bunch of crashing a few days ago. First games, then black screen with cursor, then full BSODs. Turned out system was unstable with my memory clocked too high. 11400F with 3200MHz just didn’t work. I put in a 11700 and it worked fine with the XMP profile.
Our issues for our PC are similar. My PC would freeze and when I would press the restart button it would just shutdown instead and then turn on by itself, then sometimes the blue screen of death would pop up. I never tried checking the thermal paste and I think it might be the problem.
Did that fix it my pc would be good for 30 min to an hour then it would freeze say it found an issue restart and then go into a black screen don’t know what to do
@@Hector-st3sh it might have something to do with your ram sticks. If the issue still persists like it going blue screen of death then your best chances are to check your CPU for sure.
@@RM22201 yo so I ended up getting a test cpu from best buy it wasn’t the issue tested the ram again dead stick for some reason the first time I tried it each stick worked in each slot but this time one leads to automatic blue screens hoped that helped
i had this same issue with a 6700k. im gessing the stress from moving the pc or something else like vibration from you car caused the thermal paste to crack up or something making air pockets. use liquid metal and glue it back on cause its a bitch when cleaning
I have been having something familiar with my pc i7 3820. If i left the computer without touchinh it for some time thr image freezes and i have to restart the computer. Make a full clean, changed the thermal paste, put a new cpu cooler and once in a while it freezes if i dont touch it!
Good video....sister has terrible problems atm with her 2 year old build but yesterday we used windows own diagnostics tool for ram and straight away errors were found so its off to the store to buy new memory...disappointed because the memory is corsair vengence ddr4 and being a decent make i really think that it lasting only 2 years is a bit crap
I'd recommend cleaning the RAM properly first and installing them back into the motherboard when her memory sticks are dry. Errors usually happen because of that.
When this happened to me cleaning ram fixed it for me (it also passed the memory check test) and reinstalling windows will make it do away for few months
I've been having a similar conundrum with my PC shutting off/crashing but it only happens with Star Citizen and not any other game, if I try to relaunch the game after the first crash I get the blue screen.
Hi Brian, a question from someone that has never de-lidded a cpu before, normally shy away from something like this as if the pc works fine, then basically never tamper with it. well now in a situation whereby got 2 fairly modern pc's, plus enough parts to rebuild my I5-3570k. so if I do something for the first time then now would be the perfect time without totally destroying a pc that I would need to use, and the i5-3570k is still a great pc, but thing that mainly stopped me from keeping it as a main pc was the fact I would get micro-stutters in games. so would you reccomend delidding to someone for the first time?
Hey man, appreciate the tech yes troubleshooting ❤️ have you seen bsod's with memory management? Ryzen 3700x, trident z neo 32gb 3600mhz set at 3600mhz, gigabyte aorus 2070super, msi x570 gaming pro carbon wifi, windows 11 but have had windows 10 and 11 in fresh installs and still had the random bsod's. Ut happens randomly in games, but its more persistent watching videos or a like just general browsing on opera. Where do you think I should start with this? It doesn't happen every day and can be really inconsistent.
Just mentioned this above...sister has been having memory management problems...unable to read memory etc...windows own ram diagnostics tool told us that we have a memory hardware problem...hopefully after buying new ram in the week,this will sort the problem...run the tool and see what happens...good luck
Not sure if this helps but I had my Ryzen 2700x on an msi b550 pro-vdh wifi with T-Force Dark Z 32GB 3200 mhz having BSOD on one of the xmp profiles on my motherboard. I had to run my RAM at 2933 mhz so I could use my pc.
Brian had the same problem for several weeks now, I also thought the psu then one day I swapped out the cooler then it stopped then I swapped back to my cooler than the issue appeared again. so I repasted the CPU and works better and my i7 2600 is running at 4ghz so i dint think the heat would be that back
I had a similar problem with a Dell optiplex I had for a while. I checked everything I could, I tried all the solutions, but still got BSODs. I think it was the same exact issue!
CPU reseating as mentioned in the comments is definitely something to try before hand, but this was definitely the CPU - IHS paste!
Very weird problem indeed, Did you not substitute the glue ? Or that's something that you don't do when reseating a cpu? Thanks Brian
My Haswell i7-5930K went funny on me for years. First I tought it was windows itself because I got all the blue screens of death I knew, 6 or 7? But with a fortunate glance at HW monitor I saw my CPU dived to down 225 Mhz sometimes all of a sudden. So I patched it by leaving it in a permanent overclock for years on. Than beginning this year a Windows update seemed to fixed the problem. Wierd stuff. I think it the cache of the CPU was corrupted? (And the temperatures were fine under the Noctua cooler all the time)
Can you also do tutorial to delid and relid the CPU safely and precautions everyone should take bro.
Brian - your LGA socket has Pin Misalignment problems. Check your video at timestamp:
ruclips.net/video/_W0r95MNOow/видео.html
I have had this problem before. Sometimes re-seating the CPU works, sometimes it does not. Tweaking the pin alignment solved the problems for me.
It fixed playing for me but when I dowoad something it keeps crashing
No way. I've been dealing with this problem for months. None of the possible fixes from the internet works. I did clean clean windows install so many times. My laptop was still freezing completely randomly multiple times a day every day. But I replaced paste and now my laptop didn't freeze for week. Thank you so much. You are lifesaver.
same i do everytime eeryday
I picked up a 3770K and was having similar problems that went away when I swapped to a 2500k. I’ve been puzzled as to what the problem could have been so now I’m definitely going to give delidding and reapplying thermal paste a try!
Always love how you fix real world problems and not just slapping new parts together!
Enjoy Japan and seeing your son! Well deserved.
@Thomas Cotton already did that multiple times. Even tried the 3770 on a different mobo.
Hi did the delidding work and solve the random crashes?
Do you think it's possible that it could have been fixed by the fact that the CPU was re-seated and made better contacts with the pins on the motherboard?
I think so. It's a lot more common issue. I have even seen oxidation on socket pins.
at 6:54 you can also see that some pins aren't perfect
Nah definintely not tried it quite a few times, it was definitely the paste.
@@techyescity People need to look back over you videos, they would know you'd already have administered Tech yes Lovin to the board and so it had to be something more unusual.
@@techyescity Ah ok. That is one bizarre issue then. I'm glad that you were able to figure it out. Thank you very much for your reply! Keep up the great work!
Wow!!! That’s a great catch B-Ry!!! I’m about to de-solder and solder on a new BIOS on my X79 and X99. It’s an SOP-8 chip. Praying this works!!!
I've had an intersting issue with an HD 7870 lately; it was crashing and artifacting at stock settings. But when I bumped the power limit to the maximum, it was completely stable.
Ive had 2 gpus a r9 290 and a gtx 780 ti where the middle powerstates became unstable
Fortunately that generation of gpus can be biosmoded and i was able to raise the voltage for those middle core states. You can probably do the same with yours.
I believe there are also boost and non boost bioses for the 7xxx series.
My 7950s where alot more stabe on a overclocked non boost bios.
Look for gpus without the ghz edtion moniker and then look for those bioses on tech power up. As allways your milage may vary
Had similar problems, cleaned the whole pc removing dust and then spraying the wd-40 multi purpose spray then reinstalling Windows got the work done. I think the cpu and motherboard were overheating, the north bridge radiator had one screw unscrewed and the cpu thermal paste was pretty dried out. Thanks Bryan for that great content full of good IT knowledge. You make the unrepairable possible to repair :)
What did you spray with the WD40? The motherboard? Do you have to avoid any areas like connectors?
I've been having random bsod's for a year now, mostly after starting up and reaching my desktop, never while gaming or having my pc on for long. First video that gave me some real insight, gonna try this out and hope I finally fix this mystery. Thanks!
A part of the CPU die was overheating where the temperature sensor wasn't present. Maybe a cache or something and since it was overheating it would throw out errors when accessing it
was having the same issues (was getting Event ID 18 WHEA logger errors) with Ryzen 5 3600 setup; randomly restarting on game launch and the CPU is fairly new. so far what has 'fixed' it was setting the BIOS to default, reflashing the BIOS firmware starting from 3 back then one at a time til up to date. also had to rollback the graphic driver to an earlier one. stopped using DOCP RAM settings and just set it to Auto in BIOS.
to me it seemed like Asus BIOS updates wasn't playing nice with AMD graphic drivers and any kind of OC tweaking only made it worse as far as RAM goes.
like you say temps were normal.
Loved it when you danced in front of the screen.
delidding with a tripod is the kind of content you can only get here
amazing MacGyvering bryan
Re-seating the CPU also could very well fixed it.
It's probably a good thing that if anyone got a problem that's rare that it's someone who can actually make it aware to more people just in case someone else has the same issue. I know that I am nowhere near advanced enough to delid a CPU. My last pc that worked until February this year (the parts still work but I basically built a new computer and I'm currently using the GPU that was in it as a placeholder) was experiencing random shutoffs under normal temperatures (although my CPU had idle 78C before I cleaned my pc out and fixed some of the fan orientations but it didn't help).
Before I replaced the HDD with a SATA SDD (one of the two parts that survived into the new build) I kept getting blue screened when I'd try to run a particular game. That didn't happen after I installed the new SDD but I would still get random shutoffs even under normal temps and one happened to be when I was restoring my image to the new drive. I ended up chalking it to aging hardware and just building a new budget PC. Of course I ended up kind of overspending (while at the same time not because of a gift card) on a new PSU thinking that was the issue at first but at least the PSU and drive found their way into the new build.
Huh, didn't know cpu's themselves had thermal paste inside the lid. Good to know for the future. Thanx for the informative video again Brian. :)
Most of the cpus nowadays use microsaldering, do not try to open your processor of you are not sure you can de lid it
as Bryan suggested, most CPUs are now soldered. But if you're interested you can look into delidding kits and delid CPUs.
Having the same issue with mine at present - an old xeon E5450 chip, so definitely going to give this a try many thanks for your knowledge 🤓
That’s a great catch. I never would have thought about delidding as a fix.
I had a troubleshooting nightmare recently. My fiance's i5 8400 rig started crashing all the time. Figured out that the CPU wasn't stable at stock voltage anymore. First time I've ever had a degraded CPU. I'm just hoping it works for a good while with the adaptive voltage bump I gave it.
It sounds more like your VRM´s are degrading.
I had my system, a Dell Desktop XPS 8940, 32 Ram, 8 Gig NVidia 3060 RTX Ti, for over a year without any problems. I always did my updates from Dell. My last update from Dell included at least 15 various upgrades. The update went smoothly, then a week later the system would shut down randomly without warning, I could be logged in for a minute, 15 minutes, or an hour, then crash. I resolved the issue by running sfc / scannow at a command prompt while logged into Windows, then chkdsk /f /r via a command prompt in windows, the next time you reboot the computer, chkdsk will run a repair the system. this worked for me, good luck.
I have a i7 2600k with 32 Gb Ram with a Intel Extreme Dp67BG Motherboard and a rm1000x corsair psu and I've ran into random shutdowns recently. I have ran multitude of tests , first memtest64 , then cinebench r23 as well has hwinfo checkup on cpu , gpu and motherboard temps ... with a mix of gpu cpu loads . The conclusion - I have two Gtx 1070's and sometimes they cause a random shutdown ( though separately they work 100% and all slots also work fine ) I have found that If I use the second and first gpu at the same time it gives problems and shut down but if I only use one at a time it still works fine - I still cant find a solution to this but I manage to work around it ( also SLI works fine with no crashes weirdly enough but separately working has random shut downs) and I have used 4 gpu's off the 1000 Watt psu before with no Problems so its not the power supply . Recently I had some random shutdown for a different reason popping up and it was one of my ssd sata data cables causing the trouble.
Great job finding that, I would have never thought to delid
I had to fix my PC today. Just over a year old EVGA 850 Watt gold blew a transistor. Glad nothing else went with it.
I upgraded from an i7 3770 PC about a month ago. I've been running my socket 1155 computer since I bought it new as a prebuilt in 2012. I'd upgraded it a lot over the years but realised that sooner or later it would fail me and probably at the worst possible time. So I bought a new AM4 motherboard, Ryzen 1700, 16gb of ram along with a new case and put my GPU, PSU, fans and SSDs into the case. After watching this video I'm really glad I made the upgrade.
Oh my gosh, I didn't know there was thermal paste also inside the CPU, so, replacing only the paste ON the CPU each year has no so sense if we don't replace it also IN the cpu
I'm glad you made this video. Someone could have this problem and don't even know it.
I just ran into this issue on my AMD Ryzen 5700G 32GB DDR4 system. It is a MinisForum mini PC, that packs some punch. It was working fine, then moving into a new office, it all seemed good... until gaming. Standard operations worked fine, movies, browsing, office work, even simple 2D games... it was just 3D gaming where I would get an unexpected reboot, error 41. I reinstalled my OS and some games, and of course, ensured that the OS and Device Drivers were current. Same issue, reliably. When the 3D kicks in, it reboots. Temperatures are all good 50-60C. Well, long-story short (too late), I found out that I just had too many devices plugged in to my power connections. It wasn't an issue with my PC at all, not with the hardware, not with the software. The PC was unable to pull the power it needed for that type of processing, so it rebooted. I plugged in just the necessities into the surge protectors and it is all 100%. Thanks for your thought process here. It got me on the right track, though it was a different cause than yours. Have a good one!
This been pretty interesting. I got a simular problem with an Amd A8 a while ago. The PC kept shutting off and rebooting randomly. Already cleaned everything up (mobo ram and cpu) but the problems stayed. I might try delithing the cpu and see if I can replace the paste on the die itself. Thanks for the vid Bryan, and enjoy your stay in Nippon ;)
I have that same problem at present. It's an HP Pavillion 510-P127C with the AMD A12-9800 that I'm trying to fix and flip and I've checked the ram and took the CPU out and put it under magnification to check for bad pins and cleaned and repasted it. It still crashes with BSOD cycling on Windows startup, while using Heirens recuse USB and even in the BIOS screen. My next step will be to replace the PSU with a known good one and see it that's the trick.
My PC keeps crashing on me when i play a game. I don't know what is really causing it. Even though I updated my PC as well as my NVIDIA graphics driver, the problem still lingers. Is there a way to fix this?
This informative video is why I subscribed to this channel. I have that same problem at present. It's an HP Pavillion 510-P127C with the AMD A12-9800 that I'm trying to fix and flip and I've checked the ram and took the CPU out and put it under magnification to check for bad pins and cleaned and repasted it. It still crashes with BSOD cycling on Windows startup, while using Heirens recuse USB and even in the BIOS screen. My next step will be to replace the PSU with a known good one and see it that's the trick.
12:01 so I had a weird thing happen just upgraded my pc and it was working good for a week but then got a new ram stick to help it’s fully compatible with my pc but playing world of Warcraft for a couple hours the pc would randomly shut down fully and I would have to manually turn it back on and it would work for a hour again then shut down again any ideas??
Really strange issue for me (i'm a 25+ year tech to boot) SUPER intermittent my display would go black , system would be running and I could shut down and recover. I could go MONTHS with no issues. Then I would get the same issue but when I rebooted I would get no video at all. system would boot and I could shut it down fine. Again weeks or months between issues. Then about a year into this it started to get much worse. I really thought it was my 3070 (hence why I was babying it so long) but after some real troubleshooting and a new motherboard, it turned out to be the power supply. New 750w 80+ Gold and no issues since. I was going to get a new Card when I decided to try the PSU (had an old psu) Never would have though.
Yes, be careful of assumptions. As a computer techie you at least have components to swap out. I had terrible problems with my first PC and sent it back to Viglen who said they'd fixed it and sent it back to me. In the end it was a loose molex connector pin on the main hard drive. Simply squeezing the sockets with some pliers to tighten them up sorted it out.
Thanks. I would have never thought the paste behind the lid would be the solution. The next PC I build, I'll delid the cpu and take a peek.
I'm more impressed you delided with an arca Swiss tripod head. As for the fix, doubtful. More likely needed reseating
Similar issue - after many many tries it got fixed after updating the SSD firmware. I had no idea that this was even a thing. A friend of mine still doesn't believe me and taunts me to this day.
i confirm, it worked for me too. 3 years of crashes and i wouldn't even think this would be the issue. Thank you for that comment
I remember getting so frustrated trying to solve this in my pc for days I ended up changing the power supply swapped the GPU and then I realized the tv had something wrong with the hdmis never in my life did I expect those symptoms from a bad tv 🤦♂️
omg was it actually the tv? i am using one rn and it randomly freezes and turnes green
I can't tell from the video, did you replace the adhesive on the cpu or did you leave it like that?
Also off topic, since you dabble so much into second hand markets, how do you select reliable PSUs to put into builds for PC's that you are going to flip, so that you have peace of mind that it won't explode the second it goes into the customer's hands
Looks like he did not replace the adhesive. The thermal paste made it stick, and wasn't necessary I'm assuming.
@@jjglistens5312 I know it's 2 months old lol, but the socket cover holds the IHS in place
Nice little disco dance @ 3.12. 🤣
Great diagnostics, wouldn't have called that one myself especially given normal recorded temps.
i have this cpu i7 3770 and its stuck at 1.6ghz i try everything in youtube but its faild could help me please
i got my first pc 4 month's ago and i have not had 1 solid session with it. it will give me this weird crackling audio(which i cannot find another video that talks and give an example of) at the same time will make my game stutter hard, fps drops and eventually it will just restart itself. weird thing is is that i took it back where i got it built and it worked fine? passed all the tests and didnt shut off or stutter 1 time?? then the next day i plugged it in and it worked for like 5 hours then it started the whole bs again?? im sick of pc already
My Haswell i7-5930K went funny on me for years. First I tought it was windows itself because I got all the blue screens of death I knew, 6 or 7? But with a fortunate glance at HW monitor I saw my CPU dived down to 225 Mhz sometimes all of a sudden. So I patched it by leaving it in a permanent overclock for years on. Than beginning this year a Windows update seemed to fixed the problem. Wierd stuff. I think it the cache of the CPU was corrupted? (And the temperatures were fine under the Noctua cooler all the time)
Would you have any idea what a critical kernel power error is shows up in event viewer after my pc reboots just sitting at desk too had a pc store stress test and it passed everything get it home it sits for 2 hour and does it please help
when I was fine tuning the overclock on my X58 X5675 @4.53Ghz, DDR3 @1969, North Bridge Clock 3740.9 MHz it would BSOD and rightfully so, but it got to the point where everything was working great except Fortnite would crash and BSOD, so I used DDU and clean installed the Nvidia driver and that fixed the problem
Had a similar issue with my pc crashing、but it started crashing so frequently that it would turn the pc off instantly after loading Windows。Turns out the gpu was the issue。Every pc I put the gpu into、 would get it's drive corrupted to a point were I would have to re-install Windows、since Windows repair wouldn't work。I wasn't able to resolve the issue because I couldn't go into Windows recovery mode and all hardware fixes failed。I tried cleaning it、new thermalpaste ect and the gpu was visually in good condition but in the end I had no idea what the issue was。The gpu was a gtx 970 from EVGA。
Probably bad memory on the GPU.
Im facing the exact same issue.. even have a evga 970 that looks fine visually
Whenever i turn on my PC, my file explorer keeps on launching for no reason at start up.
Till this day i don't know how to fix this, can you please give me advise on how to fix this issues
De-lidded the cpu with a camera tripod clamp... BRAVO!!!
My laptop giving BSOD when I playing game for around 5 to 15 min, i use heaven benchmark i notice that when cpu hit 85c° it's giving bsod but i tried to stress cpu it didn't give blue screen so there's anything that can fix it ?
Dang I had the same critical process issue too but I believe it was the alien ware software but maybe the heat spreader paste is mucked too so worth a shot for future issues lol.
I have a very similar issue with a computer I built myself. It works great and goes days without issues sometimes even weeks but randomly the screen will go black and the computer crashes. The only thing is the tower is still running as if nothing happened. If I power off the computer and boot it back up then it works perfectly fine until the next random crash which could be a few hours or again weeks. Besides trying to replace parts are there any tips on where I could start troubleshooting this issue.
I never get the Blue screen of death. No other issues with the computer. No specific activity causes the crash. Sometimes happens while watching youtube or even just typing on a google document.
did you solve the issue? I have the same problem, please let me know!!!
@@jonationnougat9785 Not yet, still need to take my cpu out and reseat it, but I keep worrying Ill destroy my computer. Rather just deal with the random crashes since they really don't happen that often.
Thank you so much for this video, my pc would for some reason crash when playing fortnite and other games, and thanks to you, i finally fixed it and it doesn't happen anymore!!
Re. SSD's - if you're someone who does a lot of video and/or audio editing you can wear out them out in months. Perhaps surprisingly, audio in particular - 24 bit, high sampling rate files can be huge and editing software will often create multiple undo copies. I'm not a pro but I do a lot of work meticulously digitising and restoring analogue audio, and a few years ago saw a new 500GB drive drop to 98% *in less then a month* (using a small temp/scratch disc of two older, 90GB SSDs in RAID 0 and an HDD as the destination for the completed projects). Until then I had no idea that write endurance was so much lower than older generations of SSD. People used to fret about it 10 years ago when NAND had 3000 writes-per-cell endurance (like the two I just mentioned - both 10 years old, my system drive for nearly 8 years but still at 98%), yet consumer drives are now *a tenth* of that (but certainly aren't usually typically 10 times the size). I now use three SSD's (two 500's a 1TB) which I bounce data between when editing (along with several offline HDD's for archiving) and keep a wary eye on usage.
I have come across this in the past and just reseating the CPU has fixed it 👍
I've had exactly this problem with my Thinkpad T430s (with I7-3320M), ever since I bought it in 2012. I never found out what the problem was. Same thing with a second-hand Ivy Bridge HP Desktop, which I tried to use as a media center PC with Ubuntu. They just gave me a nasty look when I complained that it sometimes reboots itself and told me they can't reproduce the issue. I also had similar issues with an Ivy Bridge HP laptop. My two Haswell desktops never had this issue.
I was so excited with my new build and I’ve tried everything I can think of, including turning off all the ASUS and Intel “tuning features” ….. unbelievably depressing… can’t afford to buy new parts to swap…. Really shitty…
…and this de-lidding thing… unfamiliar and uncomfortable with trying and ruining my chip and board if they aren’t already somehow.. yea, this is my worst nightmare… no clue what to do…
My parts are new gen, too… not even remotely replaceable
I think it was the reseating issue only, I had a FX 6300 that somehow managed to bend a pin (later it broke while trying to straighten it but it was not an important pin luckily), this bent pin put a scratch between 2 cpu socket pin holes and I started getting weird BSODs esp. regarding RAM which were otherwise working fine, figured that due to the scratch maybe the other CPU socket pin hole was getting short, just carefully reseating the CPU would stop the problem
i have a pc that has completely new everything, except the gpu. the pc will run completely fine all day, i can remote stream my xbox through it, no issues. if i try to play any game on it, even some not so graphically intense, it completely shuts off as if i hit the power button. temps are not above 75c on cpu and around 80 on gpu. i have a Radeon RX 480 8gb, 750w psu, intel i7-11700kf, 64gb ddr4 ram and windows 10 64x. All drivers and system are updated. im thinking its in the gpu because its the only used part but i do not have a new one to test with? any ideas?
I've had the strangest problems occur recently.. my pc has been running great for about a year and a half, I upgraded my gpu about 3 months ago.. I had a windows update that caused my pc to crash when playing games and one of the crashes was so bad that it corrupted my user profile.. I fixed well thought I fixed it finally after wiping all the graphics drivers and starting fresh it ran great for another week and now it's doing the same thing again.. im almost wondering if it's cpu related I have a ID liquid aio and i always felt the the cpu temp was a little higher than it should be.. I appreciate this video cause it's got me thinking maybe I have worn out the cpu with bad cooling over the corse of a year and some change
Didint saw termals on stress test . Latest i saw this , with boost processors that cache is a problem . When boosting on max core frequences
thanks alot.im strugle for years.i change pasta like you and for now it seems ok.AMD A10
Windows Memory Diagnostic Tool did not find any problems with my brother's 16gb ddr4 kit, he continued using the machine with all kinds of problems for months, got so bad he just couldn't use the machine for more than 5 minutes without a bluescreen. He gave the machine to me, I ran the same test, no problems, then I did a memtest86, and ERROR ERROR after less than a minute into the test. The memory was faulty, replaced under warranty, system worked fine after that.
Do NOT trust Windows' memory test if it says your memory is okay.
I had the same thing happen and, at first, even memtest86 didn't detect the fault in my RAM. But I suspect it was a batch of faulty controllers the mfg used on the modules and would occasionally just stop working. If the controller stops working then Windows can't even give you a BSOD like it does when the memory gets corrupted. The screen just goes blank. it is as though you simply reached in and pulled out the RAM while it was running. Yours probably had bad memory chips.
i'll admit delidding is way out of my comfort zone, but thanks for showing it can be a problem
omg. I am having random crashes in my games. Sometimes I spent 2 days without issues and then the whole PC freezes, it disconnects all my peripherals and then the freezing comes. Then I have to hard reset the PC. Sometimes it happens 3 times in a row and then again at the next day.
I ran every test, updated all my drivers. But I have been scared of checking the CPU. This is a new pre-built PC with a Ryzen 5700X and I don't want to return the machine.
Same exact thing here
I have a weird problem in my Xeon system, that suddenly it freezes then starts moving very very slowly than crash, it’s not the psu or the ram it’s either the cpu or the motherboard, ah how should I delid it or that’s not advisable on xeons?
Pc crashing randomly while playing valorant. Sometimes bluecreen, sometimes hang even while using ms word. All parts replaced but that didn't fix.
I fixed it by changing the motherboard bios settings IDE to AHCI then save, then formated it with a new windows 10.
I have issue with System with Cpu I try install Windows freezing I try three different motherboards all do the same thing Cpu I have on the motherboard is Intel i7 1000KA any advise welcome
My pc is kinda doing the same thing.
Sometimes it handles 3 hours of GTA V and sometimes crashes on youtube. Not driver problem , already installef everything again.
Maybe its the same problem ? I changed the thermal paste...
My PChas been doing weird things when my dad just Flipped the cpu and check something but I dont think he moved anything inside.
After that my pc started having glitch screens then crashing my pc(no blue screen of death just straight out turns off my pc) but sometimes I have the blue screen of death. Then next thing my monotor cant connect to the pc at times when I open it. Im pretty scared that some of my files might be corrupted if this happens for a while.
My computer was giving BSOD crashes a whole lot about a month ago. Especially when installing games or transfering files to an external SSD.
So I reseated my ram first which didn't fix the problem , then reseated my NVME drive. I haven't had any crashes since ten
I keep getting this error after my PC crashes while gaming -amdryzenmasterdriverv27 the system cannot find the file specified-i think this is the reason why it crashes but idk how to fix this
Q- my Pc wont boot to my windows boot hd and when i do it myself its has no name listed on it so i click it and it boots fine but when i restart it does it all over again???
i had similar problems with my old i7 3820. I went into bios and disabled anything referring to "spread spectrum" (whatever that was) and it solved the issue, at least for a while The old Corsair 750w PSU I had apparently was having issues (it's so old it doesn't have a 80+ rating). Swapping the PSU with a new one solved everything, but I still have the old Cosair PSU and it still works, and it seems to work fine on lower-end builds, but I try not to use it for anything long term.
Does anyone know a fix my pc keeps crashing/freezing whip I’m playing a game the whole screen freezes and I am forced to turn of the pc and restart.
The strangest problem I have seen recently is a Ryzen 7 3700X with a dead memory channel.
Dual channel memory installed correctly and the system did not post. Single stick installed and it booted. dual stick installed incorrectly booted but with bios warning of memory installed correctly. Determined it was a bad memory channel on the CPU when I swapped the CPU to a board where memory channels were swapped positions and the problem followed.
What speed ram were you using?
@@farasty7371 cannot remember. I was working at a shop and we ended up swapping the CPU to a 5800X.
Having issues with 10850k 3090. 32gb ddr4. Tried new ram, gpu, and windows. sometimes blue screen, sometimes games just tabout and close. Thought win 11 would fix this along with the alternative gpu, and, ram.
damn i have never ever heard that deliding might fix instability issues on stock setup, probably not many people tried fixing it that way either, but it feels like it fixed a symptom and not the root cause, but again im probably wrong but thats a super weird fix, enjoyed the content as always :)
For my personal stuff I only use Samsung M.2's or 2.5" SSD drives.. The Magian software is great and cloning is so easy too. It's worth the extra $20 bucks $50 even on more storage. I was on Samsung on my last PC and that 2.5" 850 EVO and it is still being used for gaming storage in that PC, I am about to sell.. People go on about PSU's n they will buy the cheapest M.2 they can find though and go with what ever that is for a gaming build.. Also I found out with crucial a long time ago that a warranty is only as good as the company it's self.. This was back when SATA SSD's had first came out. I think this was their MX250 or something like that.. Well it went bad and I think back then you only got like a 3 year warranty, on SSD drives. Now a day's it's more like 5 to 10 years.. But anyway it was a 3 year and it had only been out like 10 months, it was their drive clearly from the MX250 on it, and it went bad after like 9 months.. Crucial shipped it back too me in a box dead! Since then, I have only used Samsung Drives and haven't had any issues with any builds since then.. I am just 1 person who made sure at least 10 other people knew not to buy Crucial drives or memory, And that still didn't hurt them.. People out there swear by them..
Do any of you have any suggestions I just got a new pc and I can’t even log in because it freezes and goes to the blue screen with the frowning face
I have a very weird problem for almost a year now. My pc crashes and boots right back up but the catch is it only does that while on low usage like watching a movie, using just chrome things like that or when idle. Iv tried so many things i cant even recall all of them so damn frustrating...
CPU overclock not stable.
this same issue is with my oc from past 5 months when i try to watch RUclips or play some light game like c.s 1.6 system restart its self or just it show shutting down and it does not turn on then i press the power button it works just fine it sometimes happen in 1 hour sometimes in half an hour i tried changing thermal paste and when i swap my cpu i saw corossion in the pin not the pin its the intel cpu that golden small holes i tried to clean as much has possible with alcohol pads it works fne till 1 month still same issue please help me i haved tried different rams and i only have a basic Nvidia Quadro nsv 300 card and its new its not the issue rams are good so what is the problem then temps are fine to tired to heat it with prime95
i don't have deliding tool and good thermal paste i use Corsair tm30 paste so is the issue same with ours
one time i was playing a badly optimised game while having 2 gb ram and my pc just randomly crashed and the blue screen was having glitched text
Can u fix my pc? it constantly crashesh 15-20times a day.. showing video tdr failure
I had a similar problem last year, it turned out to be the cpu cooler mounting pressure was too tight and caused instability or something idk, just loosened the screws a bit and it was fine from then on
yeah i thought so, and ram connectors could cause similar problems, i would just reseat cpu and rams :P
That's the risk you run if you try to budget on a cooler. There is something called a plastigage you can use to verify you have the correct mounting headroom on your cooler. It is also possible you didn't install the bracket correctly, or you put gorilla torque on the screws. This is why I have a Wraith Max on my 2600 and a Wraith Prism on my 5600X. Since I undervolt for longevity, they provide plenty of cooling and I don't have to wonder if they fit properly, unlike so many of the aftermarket coolers on the market. They also have a copper thermal interface. It is really just better to fork out the money for a D15 or Arctic AIO if you are going to overclock and stick with OEM coolers if not. Although annoying to install, the spring loaded stirrup clasp on the Ryzen coolers I have is the safe way to go because the spring is designed to provide just enough pressure. At least you know they won't crack the die from too much mounting pressure. And a good thermal compound makes anything more than "enough to be secure" pointless.
I was planning to upgrade my LGA1155 motherboard from a Sandy Bridge processor to Ivy Bridge but after watching this video I will stick with Sandy Bridge.
I had a bunch of crashing a few days ago. First games, then black screen with cursor, then full BSODs. Turned out system was unstable with my memory clocked too high. 11400F with 3200MHz just didn’t work. I put in a 11700 and it worked fine with the XMP profile.
Our issues for our PC are similar. My PC would freeze and when I would press the restart button it would just shutdown instead and then turn on by itself, then sometimes the blue screen of death would pop up. I never tried checking the thermal paste and I think it might be the problem.
Did that fix it my pc would be good for 30 min to an hour then it would freeze say it found an issue restart and then go into a black screen don’t know what to do
@@Hector-st3sh did u fix it same thing happening with me
@@RM22201 nah I contacted ryzen for a replacement cpu I’ll let you know when I get it
@@Hector-st3sh it might have something to do with your ram sticks. If the issue still persists like it going blue screen of death then your best chances are to check your CPU for sure.
@@RM22201 yo so I ended up getting a test cpu from best buy it wasn’t the issue tested the ram again dead stick for some reason the first time I tried it each stick worked in each slot but this time one leads to automatic blue screens hoped that helped
i had this same issue with a 6700k. im gessing the stress from moving the pc or something else like vibration from you car caused the thermal paste to crack up or something making air pockets. use liquid metal and glue it back on cause its a bitch when cleaning
I have been having something familiar with my pc i7 3820. If i left the computer without touchinh it for some time thr image freezes and i have to restart the computer. Make a full clean, changed the thermal paste, put a new cpu cooler and once in a while it freezes if i dont touch it!
Good video....sister has terrible problems atm with her 2 year old build but yesterday we used windows own diagnostics tool for ram and straight away errors were found so its off to the store to buy new memory...disappointed because the memory is corsair vengence ddr4 and being a decent make i really think that it lasting only 2 years is a bit crap
I'd recommend cleaning the RAM properly first and installing them back into the motherboard when her memory sticks are dry. Errors usually happen because of that.
Hey is your custom windows 10 lite iso still available and is it with the latest windows 10 version? Thanks ☺️
When this happened to me cleaning ram fixed it for me (it also passed the memory check test) and reinstalling windows will make it do away for few months
I've been having a similar conundrum with my PC shutting off/crashing but it only happens with Star Citizen and not any other game, if I try to relaunch the game after the first crash I get the blue screen.
Start by looking in to what the blue screen error is it can usally begin to point you at something.
Hi Brian, a question from someone that has never de-lidded a cpu before, normally shy away from something like this as if the pc works fine, then basically never tamper with it. well now in a situation whereby got 2 fairly modern pc's, plus enough parts to rebuild my I5-3570k. so if I do something for the first time then now would be the perfect time without totally destroying a pc that I would need to use, and the i5-3570k is still a great pc, but thing that mainly stopped me from keeping it as a main pc was the fact I would get micro-stutters in games. so would you reccomend delidding to someone for the first time?
I would recommend getting a proper delid tool, not much can go wrong with using them, just take your time and don't rush it.
Great stuff as always! Something I definitely wouldn’t have considered straight away!
Which version of windows memory diagnostic test do you run? Standard or Extended?
So, should I be worried about my 10900K having the same issue?
I just upgraded 2 and reseated and new fresh windows.Just random stuff then good for hours.Sometimes not at all.And this is 2 new fresh install
Hey man, appreciate the tech yes troubleshooting ❤️ have you seen bsod's with memory management? Ryzen 3700x, trident z neo 32gb 3600mhz set at 3600mhz, gigabyte aorus 2070super, msi x570 gaming pro carbon wifi, windows 11 but have had windows 10 and 11 in fresh installs and still had the random bsod's. Ut happens randomly in games, but its more persistent watching videos or a like just general browsing on opera. Where do you think I should start with this? It doesn't happen every day and can be really inconsistent.
Just mentioned this above...sister has been having memory management problems...unable to read memory etc...windows own ram diagnostics tool told us that we have a memory hardware problem...hopefully after buying new ram in the week,this will sort the problem...run the tool and see what happens...good luck
@@slob12 keep me posted dude, wonder if this would sort my issue. Thank you ❤️
Not sure if this helps but I had my Ryzen 2700x on an msi b550 pro-vdh wifi with T-Force Dark Z 32GB 3200 mhz having BSOD on one of the xmp profiles on my motherboard. I had to run my RAM at 2933 mhz so I could use my pc.
Tried the gocard on any local transport brother?
Brian had the same problem for several weeks now, I also thought the psu then one day I swapped out the cooler then it stopped then I swapped back to my cooler than the issue appeared again. so I repasted the CPU and works better and my i7 2600 is running at 4ghz so i dint think the heat would be that back
I had a similar problem with a Dell optiplex I had for a while. I checked everything I could, I tried all the solutions, but still got BSODs. I think it was the same exact issue!