I was quoted £200 to get this fixed. I saw this video and ordered the parts for £14 on Amazon. I fixed it today and everything works fine thanks to you! You’re a god send! Thank you so much!
Thank you very much, i broke the axis of the barrel, and then i soldered it with nural21. At the box of the left side, also weakened the spring that revs back from ignition to avoid it breaks again. . I hope it last long time. A beer for you from Spain
Dude this vid has just totally saved me hundreds and hundreds of pounds with a knackered and broken ignition barrel resulting in the ignition being permanently on in my combo van. Power to you and many thanks for posting. Perhaps consider wearing trousers in the future!? Only joking once again cool stuff.!
Hi Christopher I think I have the same problem as you did my ignition barrell is turning all the way around but its not starting the engine do I just need to replace the barrel or the plastic ignition on the left side? My ignition lights are also on permanently vauxhall combo TIA
@@lpatterson5005 Jeez sorry not to have seen this before. I would think that the long pin on the barrel has sheared that was the problem with mine. I thought it was a huge huge problem but turned out to be a 40 quid fix from Amazon with the obvious need to love that transponder in your key. Hope you got it sorted as easily. Take care.
I've got a Corsa C, SXI 1200, year 2001. Think my spindle broke today. Couldn't get the engine to switch off! I was low on petrol and it stopped eventually. Breakdown guy came out and said the coil pack was very hot so hoping that hasn't burnt out because we couldn't get the engine to stop. Even tried disconnecting the battery - the engine still kept running. Now trying to source a barrel and possibly switch and coil pack. Your video is very good. Thank you. This lady driver is grateful for it :)
You're welcome.... I hope you get it sorted ... To stop the engine you could have put it in gear, put your foot on the brake and slowly let out the clutch,. This would have stalled the engine. Then disconnect the battery until the switch was sorted. No harm done......Of course hind sight is wonderful. Let us know how you get on. Good luck with the repair.
Son just got the barrel out. It was broken about 1/4 down the spring so a bit of improvisation, much wiggling and cursing, we got the broken part out of the switch :) Now need to get a new barrel and hopefully car will be back on the road in a few days :) Son says thank you for the very informative video. We had it on my mobile phone and followed your instructions step by step :)
Followed your instructions. New barrel now fitted. Only problem is now passenger door and fuel cap won't open. Took transponder out of old key and put it in new key. Car starts and runs fine. Any idea why I can't open the passenger door and fuel cap? Always had to open the doors manually as the buttons on the old key didn't work.
A rare video, showing how it's really done. Not just how I (mostly wrongly ) did it. For those driving on the right side of the road (and not on the wrong, left, side), the right-side stick, wipers, must be taken off, to have access to the hole withing which must the lever be pushed. Also, the key must be in a certain middle position for the lock to come out. And later also for it to come in. Thanks, I would never have found the hole and know I must push the lever inside it.
thanks...i too broke the ignition cylinder tip....following ur instruction I could remove the ignition cylinder. In my meriva, I need to replace the key groove too from old to new once because old key has paired immobiliser chip in it.
The rod that turns the ignition switch on the back of the lock, snapped. Its common. Went to a breakers yard picked up a Barrel and the key. (you need the key as well, and it has to be the same type of key as the one you have) Withdrew the lock from the barrel and swapped the pins from my old lock into the one I had just got. No need to have anything programmed. Disconnect your battery first.
Hi....Thanks....It was very HELPFUL.... Thank you very much.....(With your post, it was done less than 7 minutes). NB : We have spent 2h 39m without any headway....
Thans for the video my mom has a Opel Tigra twin top and if you put it op 3 it stay there and if you take the key out the dash is still on is this the same problem as u
Hi Sheller, please, when the mine of barrel is broken, and rotate the key in the second position, turn it self back in first position ? And, in first position, do the lights work ?
I have a CDTi 1.7,car not starting, tested the starter, the starter is still good but my radio keeps turning on and off by itself. What could be the problem?
Hi Sheller, I write again. What problem had the plastic part you changed ? (min 3.15) I have this problem : When I rotate key in 2 position to start engine, the starter doesn't receive power. No sounds, nothing happens. Maybe is this part defective ?
Afternoon. Could this part cause my astravan not to start? All I get is 1 click when I turn the ignition?! It is not the battery and I doubt the starter motor as when that goes it is multiple clicks when turning over the ignition?! Please help
I can’t see the brass piece that needs to be pushed to reset it! I’m so close to fixing it I just can’t seem to find anything to push down, please help!!
+James Ward sorry James, I see what you mean. it was an intermittent fault which I could not track down to any other component, ( Starter motor, earth, live switch wire, battery connections, etc.) and so it was logical to just replace the switch, which was an easy cheap fix. it cost e5.50 on ebay. It sorted out the problem.
Very useful video. My only problem is that I can't disconnect the barrel. When I insert the small screw driver, nothing gives way. I live on the coast so I'm not sure if it is corrosion. Should I drill it out or what are my other options?
Del mismo modo, introducir el destornillador, simplemente no se ajusta a mucha presión, y por lo tanto no salga del barril. Una persona con un caso tal, podría solucionarlo?
I have a corsa sxi 2003 I went to put my key in the ignition and nothing all the lights and radio and Heater work and it also starts fine on a bump start. I've charged the battery that's fine. Can anyone recommend what the issue is before I think about undertaking this task? Just want advice please. Thanks when I turn the key there's no click there's literally nothing
hey guys i have a 2006 vauxhall corsa 1.2. when the ignition is off the radio and mfd randomly turn on. what could be the cause of this problem. should i goahead and replace the ignition switch? please help?
Usman Rabbani The radio is supplied by a constant live, regardless of the ignition switch. If the radio turns on while the key is not in the ignition, this would point to a problem with the radio itself.
hi guys I need help here ave got a Carsa 1.4 utility when I switch da key on noting Hpns bt da bettry is fyn lyts wrkg radio bt it not switching on on da Dash nd not starting
Just followed your instructions to repair a switch that was giving power to the radio at all times. Thanks for sharing!
I was quoted £200 to get this fixed. I saw this video and ordered the parts for £14 on Amazon. I fixed it today and everything works fine thanks to you! You’re a god send! Thank you so much!
Thank you very much, i broke the axis of the barrel, and then i soldered it with nural21. At the box of the left side, also weakened the spring that revs back from ignition to avoid it breaks again. . I hope it last long time.
A beer for you from Spain
+pepe cual Thank you my friend ....If only I had the Sun over here in Ireland to go with that Beer !!! : 0 )
Thanks for sahring, friend;
Just today I had that same trouble and could fix it with the help of this video.
Warm regards from Mexico.
Dude this vid has just totally saved me hundreds and hundreds of pounds with a knackered and broken ignition barrel resulting in the ignition being permanently on in my combo van. Power to you and many thanks for posting. Perhaps consider wearing trousers in the future!? Only joking once again cool stuff.!
How dare you......
I have lovely legs....
Hi Christopher I think I have the same problem as you did my ignition barrell is turning all the way around but its not starting the engine do I just need to replace the barrel or the plastic ignition on the left side? My ignition lights are also on permanently vauxhall combo
TIA
@@lpatterson5005 Jeez sorry not to have seen this before. I would think that the long pin on the barrel has sheared that was the problem with mine. I thought it was a huge huge problem but turned out to be a 40 quid fix from Amazon with the obvious need to love that transponder in your key. Hope you got it sorted as easily. Take care.
I've got a Corsa C, SXI 1200, year 2001. Think my spindle broke today. Couldn't get the engine to switch off! I was low on petrol and it stopped eventually. Breakdown guy came out and said the coil pack was very hot so hoping that hasn't burnt out because we couldn't get the engine to stop. Even tried disconnecting the battery - the engine still kept running. Now trying to source a barrel and possibly switch and coil pack. Your video is very good. Thank you. This lady driver is grateful for it :)
You're welcome.... I hope you get it sorted ...
To stop the engine you could have put it in gear, put your foot on the brake and slowly let out the clutch,. This would have stalled the engine. Then disconnect the battery until the switch was sorted. No harm done......Of course hind sight is wonderful. Let us know how you get on.
Good luck with the repair.
Son just got the barrel out. It was broken about 1/4 down the spring so a bit of improvisation, much wiggling and cursing, we got the broken part out of the switch :) Now need to get a new barrel and hopefully car will be back on the road in a few days :) Son says thank you for the very informative video. We had it on my mobile phone and followed your instructions step by step :)
Thats great news.... I tend to use a lot of cursing and swearing myself... I get it from Halfords Autoparts when I run low !!!
Followed your instructions. New barrel now fitted. Only problem is now passenger door and fuel cap won't open. Took transponder out of old key and put it in new key. Car starts and runs fine. Any idea why I can't open the passenger door and fuel cap? Always had to open the doors manually as the buttons on the old key didn't work.
Still helping people in 2020 ,thanks for the video
Glad to hear it .....
A rare video, showing how it's really done. Not just how I (mostly wrongly ) did it. For those driving on the right side of the road (and not on the wrong, left, side), the right-side stick, wipers, must be taken off, to have access to the hole withing which must the lever be pushed. Also, the key must be in a certain middle position for the lock to come out. And later also for it to come in. Thanks, I would never have found the hole and know I must push the lever inside it.
thanks...i too broke the ignition cylinder tip....following ur instruction I could remove the ignition cylinder. In my meriva, I need to replace the key groove too from old to new once because old key has paired immobiliser chip in it.
Thank you very much! You helped me a lot and saved me a lot of money! Very useful and helpful video!
Very good video, thanks for the extra detailed instructions
What was the issue you had
What if the original key can not turn this new barrel? I don't what to do next..
Thanks for the video
Saved me £200. Thank you very much indeed.
The rod that turns the ignition switch on the back of the lock, snapped. Its common. Went to a breakers yard picked up a Barrel and the key. (you need the key as well, and it has to be the same type of key as the one you have) Withdrew the lock from the barrel and swapped the pins from my old lock into the one I had just got. No need to have anything programmed. Disconnect your battery first.
Hi....Thanks....It was very HELPFUL.... Thank you very much.....(With your post, it was done less than 7 minutes).
NB : We have spent 2h 39m without any headway....
+Dream Studios TV ....You welcome Dream, Glad it helped and thank you for the kind comments.
Thans for the video my mom has a Opel Tigra twin top and if you put it op 3 it stay there and if you take the key out the dash is still on is this the same problem as u
Muchas gracias por el vídeo!!! Saludos desde Patagonia Argentina.
I've changed the barrel thanks to your video much appreciated,,now my steering lock keeps coming on any ideas thanks in advance
Hi Sheller, please, when the mine of barrel is broken, and rotate the key in the second position, turn it self back in first position ?
And, in first position, do the lights work ?
I have a CDTi 1.7,car not starting, tested the starter, the starter is still good but my radio keeps turning on and off by itself. What could be the problem?
sehr hilfreich . danke 👍
what if your steeringlock is on and you can't turn the key to position l or ll or lll...
Hi Sheller, I write again. What problem had the plastic part you changed ? (min 3.15) I have this problem : When I rotate key in 2 position to start engine, the starter doesn't receive power. No sounds, nothing happens. Maybe is this part defective ?
Me salvo la vida😊
It was done on OPEL Zafira 2001........ Thanks again....
Chev Corsa 2010 UTE ,The ignition is not working anymore the key just turns without anything happening, Any Solution for this ?
What were your symptoms? Thanks for the video btw
Is this same ignition as for Chevrolet bakkie?
Thanks m8 video was very helpful 👍
Exelente video muchas gracias
Very usefull, thank you sir!
What position must be key be for it to release
Great video, very helpful!!!!
Great work I will be on this tomorrow
Hi just one quick question can I use a immobiliser unit from a scrap yard to start my car , lost my keys last week
Thanks! 👍🏾
Hi, could you tell me what was your symptoms?
Afternoon. Could this part cause my astravan not to start? All I get is 1 click when I turn the ignition?! It is not the battery and I doubt the starter motor as when that goes it is multiple clicks when turning over the ignition?! Please help
Thank you Brother!
I can’t see the brass piece that needs to be pushed to reset it! I’m so close to fixing it I just can’t seem to find anything to push down, please help!!
hi i lost my keys of an opel corsa c and i want to change the ignation barrel is possible without a key
Hi..
I have a opel 200ie.. the keys got stolen.. but I made new keys without the sensor.. is there a way of starting the car
Cómo puedo.desblokear el switch de encendido de mi carro.coesa 2006 se quedó prendido tuve que descontar la pila
I appreciate that it was faulty. Was there intermittent or complete non function when the key was turned?
+James Ward sorry James, I see what you mean. it was an intermittent fault which I could not track down to any other component, ( Starter motor, earth, live switch wire, battery connections, etc.) and so it was logical to just replace the switch, which was an easy cheap fix. it cost e5.50 on ebay.
It sorted out the problem.
thanks for the effort
Where can fix mine in Johannesburg
Very helpful. Solved thanks
Thanks very HELPFULL.. Thank you very very much
can one take a chip out of a key and insert it into another key and different barrel?
Yeah you can
What if we don't have a key...?
Excellent..great video
What part was ordered for this
hey where would I find the connect for the ignition switch? I know it is a Delphi connector but cannot find it anywhere!! thanks
Thanks it was very useful,to me i will do it just like u..thank u very very much..good work :)
+Christian McPerkins you are welcome Christian, good luck with your repair. and thank you for your support.
Very useful video. My only problem is that I can't disconnect the barrel. When I insert the small screw driver, nothing gives way. I live on the coast so I'm not sure if it is corrosion. Should I drill it out or what are my other options?
Del mismo modo, introducir el destornillador, simplemente no se ajusta a mucha presión, y por lo tanto no salga del barril. Una persona con un caso tal, podría solucionarlo?
I think the key has to be in position 2 when u insert the small screw driver.
Mine the key just rotate free I need help its Opel astra
what did you eventually do about this simon?
Excellent. ! Thanks
Moi problem auto corsa c ne pas affichees check engine non repond le motor
Pourquoi defeault ?????
My Dash lights stay on after the headlights and key are removed could it be the ignition switch
+James Penny Sorry James, i dont know ....
your ignition barrel (spindle) rod is broken, you need to change barrel. The broken part is still inside ignition switch in (ON) mode
Ajuda o buraco do canhao foi danificado como nao segura o canhao como reparar
Great
Very good video thanks
I have a corsa sxi 2003 I went to put my key in the ignition and nothing all the lights and radio and Heater work and it also starts fine on a bump start. I've charged the battery that's fine. Can anyone recommend what the issue is before I think about undertaking this task? Just want advice please. Thanks when I turn the key there's no click there's literally nothing
I just had my 2002 sxi in garage with identical issue and it was this part that had failed
Why did the switch need to be replaced?
+James Ward because the switch was faulty, James.
hey guys
i have a 2006 vauxhall corsa 1.2. when the ignition is off the radio and mfd randomly turn on. what could be the cause of this problem. should i goahead and replace the ignition switch? please help?
Usman Rabbani The radio is supplied by a constant live, regardless of the ignition switch.
If the radio turns on while the key is not in the ignition, this would point to a problem with the radio itself.
thnks for ur message.
the multi function display also turns on.
Usman Rabbani will
hi guys I need help here ave got a Carsa 1.4 utility when I switch da key on noting Hpns bt da bettry is fyn lyts wrkg radio bt it not switching on on da Dash nd not starting
your ignition barrel (spindle) rod is broken, you need to change barrel. The broken part is still inside ignition switch in (ON) mode
dziękuję bardzo
Hellw guy l
Hie
My light dashboard is not coming on
Thank you. Cheers