Thank you so much for this! I had hyperflashing on the right hand side, all bulbs OK and hazards were normal so I ruled out the relay. I took a chance and replaced the stalk - problem solved instantly! Your video ensured I could do it myself and avoid costly garages. I thank you.
Good video - currently looking to change my indicator stalk to solve a fast flashing issue. Seems pretty straightforward. Just wondering, did you disconnect the negative battery terminal before doing this? Or would you advise doing so? Bit paranoid about accidentally triggering the airbag haha.
Don't use a screwdriver on the soft plastic, man. Use a plastic tool, a credit card, whatever. You made scratches right before our very eyes, and you were close to snap that little clip thing with a Philips head screw driver. I bought some very cheap, low quality orange prying tools. Work fine. Ten times better than attacking the poor interiour with steel screw drivers.
Thank you so much for this! I had hyperflashing on the right hand side, all bulbs OK and hazards were normal so I ruled out the relay. I took a chance and replaced the stalk - problem solved instantly! Your video ensured I could do it myself and avoid costly garages. I thank you.
I literally have the same problem on the same car. Thanks your video helped me! Buying parts right now to change it
Can I also change my indicator switch because my car doesn't indicate on the right but only on the left
Thank you, great vid and instructions.
Thanks!! Just what I needed!
Good video - currently looking to change my indicator stalk to solve a fast flashing issue. Seems pretty straightforward. Just wondering, did you disconnect the negative battery terminal before doing this? Or would you advise doing so? Bit paranoid about accidentally triggering the airbag haha.
A fast flash is usually an indicator that one of the blinker bulbs is burned out. Check to make sure they all work. If they do, its a bad relay.
thank you for this could you please tell me what the buttons do that are on the steering wheel itself there are 3 either side thanks
Those are your radio controls, unfortunately mine don’t do anything because I’ve got aftermarket radio installed, they only work with original radios
@@thecarstuff869 in that case i have the same problem many thanks
I have an Opel Corsa C with cruise-control. Is the installation method the same?
Tbh I'm not sure but from looking at the part online it looks very similar so I think it should be the same method as the one I've installed
@@thecarstuff869 thank you for your quick reply! I will try to replace the indicator switch tomorrow. Hopefully it will be easy :)
@@thecarstuff869 replacement for an indicator with cruise-control is exactly the same!
Thank buddy!
Thought it would be a nightmare 😆
Thank you!
Great Video mate and thanks for the help! ;)
Will this be similar to changing corsa b indicator stalk?
I’m not 100% sure, but I think it is as indicator stalk look similar in both corsa’s C and B.
Great thanks .Well done .
Thanks pal 😊
Dont need to remove any screws
i have litteraly the same problem
Don't use a screwdriver on the soft plastic, man. Use a plastic tool, a credit card, whatever. You made scratches right before our very eyes, and you were close to snap that little clip thing with a Philips head screw driver. I bought some very cheap, low quality orange prying tools. Work fine. Ten times better than attacking the poor interiour with steel screw drivers.