I'm enjoying these tutorials. I've been taking tutorials from a few different channels. I definitely appreciate having different designers offering up these quick tutorials that simply show us concepts, and then turn us loose to be creative with our new skills. Definitely looking forward to more tutorials from you!
You are unbeliveable fantastic clean brainy help. God bless you from my heart. I am satisfied the first time with you. And continue we will ollow you sir.
Super helpful! My woodshop teacher asked me to learn this program so we can use it on my school’s larger CNC and asked me to teach my class how to use the program, these videos are really helping me learn it!
@ Gamergirl89, isn't that called child labour or exploitation? Shouldn't he at least be paying you some of his wages for doing his job? Next he'll be wanting sexual favours! (Trust me ;-). "Good morning class. It's lovely to see you all here again. Especially (insert your real name here unless you have really weird parents!)". A little while later once everyone else is busy pretend sword fighting each other with blunt chisels and screwdrivers and seeing how tightly they can G clamp their nipples, "I say, that's a very nice deep plunge blouse you have on young lady. Be careful you don't get any shavings down there or I'll have to put my hands in and scoop them out for you! Speaking of shavings, look at all that dust down the back of the CNC bed. Be a darling and bend over and sweep them out for me?" Oh, sorry, your teacher is female!! In that case.... wow, it's getting hot in here.... I need to open a window! OMG, you're actually male pretending to be female as a research project! In that case.... you have bigger issues than I do!
SupraSmart68 what?? Dude, it was part of the curriculum. I was the only one in the class with any sort of computer know-how plus this was a year ago, chill out. And please don’t make those weird comments. (I’m a minor)
SupraSmart68 You are not “supra smart”...you are a SUPER CREEP. Do you always tell stories of your sexual fantasies to underaged teenagers? Bc you just did. Just...gross. Consider yourself reported you disgusting excuse for a human being, and get a life.
30 year mold designer here. Looking at different softwares to evaluate. Got any mold design tutorials? The 2 Iv'e seen so far were very informative. Thank you!
Hi Richard, wonderful start to the series, looking forward to the next one. Videos are so much faster to learn from than the SolidWorks books or forums. The other day I was trying to figure out to create a belt mate, struggling with the forum suggestions, but after one quick video, I was done.
Once i have made a drawing with the 3 holes how do i make it bigger not in scale, so same scale but now I want a part like that, but say 12 feet long with holes in exact same scale still apart and in size?
I'm a self taught engineer running and working in my own machine shop. I'd like to move into CAD/CAM to take my business forward but so far I can't afford to just buy something like SOLIDWORKS on the off chance that I might be able to use it in real life. Unfory the UK's vocational education system is broken. Is there any way that I can get to practice on the software without having to pay £2000 to lean the basics?
Oh man... at 6:30 you have to keep going back to the rotate button to move the part around before you select each corner for the fillet? I wonder why they do it like that. Seems like Rhinoceros is a little more efficient at most things. Either way, totally wanna learn SW.
Thank you for the helpful video. I'm new to SolidWorks and trying to figure out the best way to efficiently learn the software. Besides watching online videos, what do you recommend? I'm thinking about becoming certified...What first step would you recommend? Your guidance is greatly appreciated.
The way I learned was to find a real project to do. Something simple to moderate that you can design. Having a project to do forces you to learn on your own. Personally, I pick the most difficult challenges and break them down to simpler tasks but it depends on how you like to learn.
@@InventionTherapy Thank for your advice. I do have a project in mind that I can start with. Is there a third party company (online) that you like to use, for machining your parts?
great tutorials !, im just wondering, would student solid works or an older less expensive SW software do the same thing or are you using the latest and greatest of SW 2018 ? again Thank you and keep making this great videos please
Onshape is the older, online version o Fusion 360, no? Not really a good choice for an inventor at this point. We prefer Fusion 360, Autocad Inventor or Solidworks.
The cheapest way to get this program would be to participate in some competition like SAE Baja and asking for sponsorship form Dassault system. And the other way is very well known and I don't really need to tell you.😎
Sometimes one loses track of the white mouse cursor/pointer in the white background. Could you add a yellow shadow, circle, around the mouse cursor/pointer? ruclips.net/video/IOHBX23sMZw/видео.html
Your videos are straight to the point and easy to follow. I use them as a guide for every part I make.
I'm enjoying these tutorials. I've been taking tutorials from a few different channels. I definitely appreciate having different designers offering up these quick tutorials that simply show us concepts, and then turn us loose to be creative with our new skills.
Definitely looking forward to more tutorials from you!
You are unbeliveable fantastic clean brainy help. God bless you from my heart. I am satisfied the first time with you. And continue we will ollow you sir.
You are really helping me brush these skills up in quarantine ready to impress my teacher when I get back to school. Thanks!
Thank you for posting your videos! I'm trying to learn on my own before my yearly review at work. Getting this knowledge can open up so many doors!
Super helpful! My woodshop teacher asked me to learn this program so we can use it on my school’s larger CNC and asked me to teach my class how to use the program, these videos are really helping me learn it!
@ Gamergirl89, isn't that called child labour or exploitation? Shouldn't he at least be paying you some of his wages for doing his job? Next he'll be wanting sexual favours! (Trust me ;-).
"Good morning class. It's lovely to see you all here again. Especially (insert your real name here unless you have really weird parents!)".
A little while later once everyone else is busy pretend sword fighting each other with blunt chisels and screwdrivers and seeing how tightly they can G clamp their nipples, "I say, that's a very nice deep plunge blouse you have on young lady. Be careful you don't get any shavings down there or I'll have to put my hands in and scoop them out for you! Speaking of shavings, look at all that dust down the back of the CNC bed. Be a darling and bend over and sweep them out for me?"
Oh, sorry, your teacher is female!!
In that case.... wow, it's getting hot in here.... I need to open a window!
OMG, you're actually male pretending to be female as a research project!
In that case.... you have bigger issues than I do!
SupraSmart68 what?? Dude, it was part of the curriculum. I was the only one in the class with any sort of computer know-how plus this was a year ago, chill out. And please don’t make those weird comments. (I’m a minor)
SupraSmart68 You are not “supra smart”...you are a SUPER CREEP. Do you always tell stories of your sexual fantasies to underaged teenagers? Bc you just did. Just...gross. Consider yourself reported you disgusting excuse for a human being, and get a life.
Your tutorials are perfect. Thanks for your work!
Excelent Tutorials!! Thank very much for your support!!!
Spot on buddy, nice and clear, simple and no messing around blundering!
I am new to All This.
Your video is easy to understand and I hope I will learn a lot of you.
Thanks.
Best tutorials and teacher on the internet!
Hands down the best tutorials on RUclips
30 year mold designer here. Looking at different softwares to evaluate. Got any mold design tutorials? The 2 Iv'e seen so far were very informative. Thank you!
Hi Richard, wonderful start to the series, looking forward to the next one. Videos are so much faster to learn from than the SolidWorks books or forums. The other day I was trying to figure out to create a belt mate, struggling with the forum suggestions, but after one quick video, I was done.
More videos to come.
Very good tutorials. I've always been a little hesitant about software such as this, and you are helping to make it easier. Kudos!
Smart, easy, awesome... thank you ☺
now im interested in solidworks...thank you
Your tutorials are extremely helpful. Please keep up the good work and upload some more. Thanks.
Are you guys not being notified? I just did an hour live class that ended five minutes ago. ruclips.net/video/dXfZMz9YNFk/видео.html
Thank you so much for your tutorials
More to come
thanks for the free tutorials!
Great work. Thank you.
What a great tutorial, thanks!
Thank you Sharon
Thank you very much .
Again... Thank You very much!
THANK YOU
Great this is really what I needed keep it on thanks.
Once i have made a drawing with the 3 holes how do i make it bigger not in scale, so same scale but now I want a part like that, but say 12 feet long with holes in exact same scale still apart and in size?
Thank you really helps me out
Glad you liked it.
Thanks !
step by step, easy to learn, it work good!
I'm a self taught engineer running and working in my own machine shop. I'd like to move into CAD/CAM to take my business forward but so far I can't afford to just buy something like SOLIDWORKS on the off chance that I might be able to use it in real life. Unfory the UK's vocational education system is broken. Is there any way that I can get to practice on the software without having to pay £2000 to lean the basics?
How did you become a self taught engineer I want to be one
Oh man... at 6:30 you have to keep going back to the rotate button to move the part around before you select each corner for the fillet? I wonder why they do it like that. Seems like Rhinoceros is a little more efficient at most things. Either way, totally wanna learn SW.
Did you just compare Rino to Solidworks? That's like comparing Ferrari to Kia.
Good video, thank you
Thank you for the helpful video. I'm new to SolidWorks and trying to figure out the best way to efficiently learn the software. Besides watching online videos, what do you recommend? I'm thinking about becoming certified...What first step would you recommend? Your guidance is greatly appreciated.
The way I learned was to find a real project to do. Something simple to moderate that you can design. Having a project to do forces you to learn on your own. Personally, I pick the most difficult challenges and break them down to simpler tasks but it depends on how you like to learn.
@@InventionTherapy Thank for your advice. I do have a project in mind that I can start with. Is there a third party company (online) that you like to use, for machining your parts?
I have used a few companies in California and China. Here is one I currently use: queentaprecision.com
Thank you
That was helpful I learn a new trick.
My offset entries was greyed out when doing the loop, sw 18
First select the top face and click "sketch"
Nice video and very helpful. I am wating to the next video in this series 😀🖒
i love solid works
Great tutorials thanks!
You are welcome
great tutorials !, im just wondering, would student solid works or an older less expensive SW software do the same thing or are you using the latest and greatest of SW 2018 ?
again Thank you and keep making this great videos please
All versions from SW 2011 on are basically the same.
Very useful!!!!!!!
Thank you. I try.
Can you do: "How to use AutoCAD on a Chromebook" ? It's hard to use without all the PC sub menus
I use a MAC with Windows.
you can try onshape
Onshape is the older, online version o Fusion 360, no? Not really a good choice for an inventor at this point. We prefer Fusion 360, Autocad Inventor or Solidworks.
can someone send me the link to the finished objective please and thank you i’m just trying to pass my engineering class
Erased it a long time ago. Follow the video and you can make it yourself in a few minutes.
you are awesome
What’s the cheapest way to get this program?
Solidworks is not exactly cheap in any version: www.solidworks.com/sw/purchase/solidworks-trial.htm
The cheapest way to get this program would be to participate in some competition like SAE Baja and asking for sponsorship form Dassault system.
And the other way is very well known and I don't really need to tell you.😎
I felt cheated, I just kept learning 5 more mins about SW :P 😂
Sometimes one loses track of the white mouse cursor/pointer in the white background. Could you add a yellow shadow, circle, around the mouse cursor/pointer?
ruclips.net/video/IOHBX23sMZw/видео.html
Ugh... ALL my lines and circles are blue..
Why is it called a top plane? It should be Z zero. The base plane.
BRUH
Click Bait
Bcz its not 5 min, rather 8!!! OMG THE SCAM :D