How to assign address to mcp, detectors? I need your all video links related to GST200 FACP. your videos are very helpful and informative, please help me
Hi. So i was witching your clip on programming GST200n-2 single loop panel. I’m having some difficulties with programming the Gst200n-2, please can you help??.. Thanks a lot
First, we need to check the voltage on all the boards like main board and terminal board. In the main board session is having 24V DC and 5 V DC input port. Sometimes, this 5V may not come and so the display will not work. If so, we need to buy a seperate 5V dc power supply and connect on these terminals and check. And still if it is not working, remove the main board and display board and reconnect properly. Again if it is not working, need to replace the main board and check.
First, we need to check whether these MCP's are detected or added in the panel by pressing browse button - press 1 for loop devices - select the rqd loop number and check these MCP's address are showing and it is assigned as MCP through the software. And also check these MCP's and SD are in the same zone. If so, it should alarm when we activate the MCP.
We can address the detectors using the hand held programmer. The model number is P9910B. Connect the leads of the programing tool on the pin number 1 & 3 on the detector and then press clear button on the programmer - enter the address number which we need to program on the programming tool and then press program. If it got programmed, the display will show as P.
Sir I have facing problem with this pannel. Alarm is coming but the keypad is not working. No button is working but the display is showing. What can be the reason and how can I fix it please tell me
Need to check whether the problem is from panel side or loop side. For this, first we need to remove the loop cable from the panel and then connect only one MCP and one Sounder and then do the autolearn. Now we need to activate the MCP and check whether we can do the silence and reset from the panel keypad.
Very very useful , thanks for this videos
Very nice video
If there is a piece that is damaged and I want to replace it do you need to program the address or program automaticly???
Best supporting video
sir do you have vedios hw to add loop card in this panel sir?
How to assign address to mcp, detectors? I need your all video links related to GST200 FACP. your videos are very helpful and informative, please help me
ruclips.net/video/kDW91qDAwVU/видео.html
Below is fire video folder link ruclips.net/p/PLTrd_jMBwxRpr-N-4bz53bHwRX4kunpkk
sir i have 8 panel how fiber cable is run with panel for network work station
Is it possible to connect GST200N panel id with 11 Number (Two Digit) ?
Because I faced issue like TimeOut.
Hi.
So i was witching your clip on programming GST200n-2 single loop panel. I’m having some difficulties with programming the Gst200n-2, please can you help??.. Thanks a lot
Please check out another video of Gst200 panel ruclips.net/video/kDW91qDAwVU/видео.html
Great
I have a question how to fix the 'display not showing " in the panel imean it is need to be program?
First, we need to check the voltage on all the boards like main board and terminal board. In the main board session is having 24V DC and 5 V DC input port. Sometimes, this 5V may not come and so the display will not work. If so, we need to buy a seperate 5V dc power supply and connect on these terminals and check. And still if it is not working, remove the main board and display board and reconnect properly. Again if it is not working, need to replace the main board and check.
Brother autolearn panna existing program erase aaiduma ??
No. It won't erase the existing program.
Iyya neenga Tamila????😊
manual addressing kr skte h kya sir isme
No
@@Lowvoltage other fire alarm panel maari GST la location manual ahh entry panna mudiyaatha bro???😮
Boss you know password to remove dongle lock in gst200
Hola cómo estás .tendrías un correo electrónico para comunicarme con Tigo .saludos de Uruguay
Smoke divace se fire horha hai par mcp se fire nahi horha hai kiya problem hosakta hai voltage aaraha hai mcp me
First, we need to check whether these MCP's are detected or added in the panel by pressing browse button - press 1 for loop devices - select the rqd loop number and check these MCP's address are showing and it is assigned as MCP through the software. And also check these MCP's and SD are in the same zone. If so, it should alarm when we activate the MCP.
How do you address optical detectors?
We can address the detectors using the hand held programmer. The model number is P9910B. Connect the leads of the programing tool on the pin number 1 & 3 on the detector and then press clear button on the programmer - enter the address number which we need to program on the programming tool and then press program. If it got programmed, the display will show as P.
Brother how to recover erased date from panel?. Can you tell me any possibility.
Sir I have facing problem with this pannel. Alarm is coming but the keypad is not working. No button is working but the display is showing. What can be the reason and how can I fix it please tell me
Please share your company name and location.
Need to check whether the problem is from panel side or loop side. For this, first we need to remove the loop cable from the panel and then connect only one MCP and one Sounder and then do the autolearn. Now we need to activate the MCP and check whether we can do the silence and reset from the panel keypad.
CRT card fault how to clear
Hi brother unga assistance thevai I'm from Qatar
Cable name which connect panel to laptop
P9930 - cable required
It's communication card, Cable name Please, which connect to laptop.
@@bihari_dhamaka106 along with this card 2 cables comes, 1. USB to printer port
2. RS232 TO RS232
P9930 is the card need to purchase which comes with the cable
How to change the language to english?
Loop One Device how to Disable & Enable
how to add location of devices
Please ref. my another video ruclips.net/video/kDW91qDAwVU/видео.html
I want to support plz if you time
Please share your company name and location.
Please also mention issue where you need support.
Hi brother I want to learn gst system may I have your contact??
hello sir- thanks for u vidoes-- please help me to contact u- my company is shyam surveillance and security and location -kolkata-
Charger faults how to clear