Hey Tinman . . . here I am up here in Ontario and a bit snowed in so just kickin' back havin' a pretty quiet Friday nite and as I watch you, you mention that it's tonite and all of a sudden I feel like I have company and a buddy over . Pretty dang cool . I got a 266 for fifty bucks a coupla days ago so pretty chuffed to follow along. Really likin' yer vids bud !
That's a nice old saw tinman. So great you and ironhorse are collaborating with and for buckin Billy! Hes who got me into the 266xp originally. I've been running a stihl o44 since I started cuttin but since I got my rebuilt 266 I'm a husky convert. Cheers
Tinman's Lab is creating Monster Power Saws!!! You are so fantastic for sharing your wisdom with us and educating your viewers. We are Tinmanized and Loving It!!!
@@tinmanssaws the 268 is even ported it was when I got it and shes not an easy starter the 266 on the other hand has a ton of compression and starts on the 3rd pull
i’ve got two of these. my grandad give me them. he got them when he retired from the forestry. one runs. the other just needs exhaust and new fuel line.
@Tinman I've been using Three Bond 1184 for a couple years and it's a great adhesive and sealer compared to the one you are having trouble with in the cold. I'm in Calgary Alberta and my shop is about the same temp as yours!🥶 Hope that helps, good luck with your builds.😉👍
You’re an amazing guy tinman! Extremely knowledgeable and humble. I love watching your channel. And I can’t wait to see the echo turd saw put back together.
Fri nite in the shop! Something to look forward to! Thank you for that! Pretty cold there I can see your breath and you are still sharing keep those hands warm.❤️
This community is now its own living organism. 💪🏻⚡️🪓 It has been amazing to watch you go from 1500 subs till now. Keep spreading the knowledge my friend. Kindness and love
I absolutely love my Yugoslavia Tomos 266xp! I don't even have to brag about it being a badass, It speaks for itself! I had a neighbor walk by my house last week when I was cutting some big ol Douglas fir rounds an arborist dropped off in my driveway weighing around 600 pounds a piece! He said he could hear it barking two blocks away and no bogging down at all! So he told his wife that he was taking the dog for a walk and wanted to see what kind of saw he was hearing that sounded so good! So I started it up and handed it to him and told him to bark the throttle a few times to see how fast it RPMs. I could tell he was scared of the damn thing as soon as it torqued up in his hands and he immediately handed it back over to me and said, Oh wow! I have got to get me one of those! I informed him that the saw was 35 years old, And from Slovenia, And he would be about as successful as a one legged man in an ass kicking contest at finding one of these bad boys! And they just don't make them like they used too! I don't know if the saw was factory ported, Or if someone who new what he was doing with a rotary tool? But it sure is fun to get in the bite and watch the chips come out and bury your boots in seconds, Priceless!🤗
The first saw I ever turned a screw on was a 266SE. Your fireduppedness is contagious, brother! It took me a bit to build myself up to cutting the custom hood scoop you'll need for the big bore top end to fit. I looked and looked to try to find a 266 top cover and they are damn hard to come by!
Love your channel bud! I hear ya on being excited for warmer weather and slapping saws together. Got a 272 and 268 I’m working on at the moment. Keep up the great work!
i have a 266 that needs a new piston and jug and seen you post up this vid and cant wait to follow along. ironhorse and buckin are a couple of great guys
Wow, it looks like there are a lot of really cool builds about to happen. Can’t wait! And very cool of Harvey to send some parts! Have a great weekend Tinman.
The Buckin 266 build will be interesting. I will be watching the 10-10 build closely. I have a free 10-10A I just got running and made a vid about it. Thanks again Tinman.
Great to see you building buckin a saw.thanks to IRONHORSE got some nice parts to use.been missing Harvey lately. I'm an ironhorse type of guy..hes the best bullshitter...lol.
Where was the light coated piston sourced from, I'm also having hard time getting parts in Canada! Any suppliers advise to use or not to use would be appreciated thanks! Really enjoy your channel and the time u spend helping/entertaining/educating us is much appreciated!
Hey tinman! I've been working on a 268 for months, every time I put it together the saw fires up and races away! I've put new seals in it, new gaskets, etc! About ready to throw the thing out!
Of you can shoot some brake clean around the potential spots for air leaks while it's running you should find the leak, the brake clean lowers the RPM if it sucks it in. Walt at Afleetcommand has a couple videos on diagnosing leaks with it. Check the intake, I believe those ones use the plastic block, sometimes they crac from being over tightened. Best is using a pressure and vacuum tester like a mity-vac, about $80-$120, if you're doing many builds or much saw work, it's a good investment, good luck👍
@@jimssawsnstuff8903 Thanks Jim, yes I am a big fan of the Afleetcommand channel and recently used the brake clean trick to find a crack in a Jonsered 70E intake manifold(also plastic)... I really wonder if I have the crank seals in correctly. Will see if I can test it but the saw goes straight to practically max RPMs and I don't want to blow it up. Has a nice OEM gilardoni open port cylinder on it.
Hyway is very good stuff. I have been ordering direct from them, tends to be faster than ordering from the states. Weird part of being in Canada... Lol. I really need to start making more content, no shortage of 266's over here in NW Ontario. Just put together a very ugly 61/272 with a Hyway Nikasil popup top end, finger ports etc... Have a VI922 in pieces on the shelf, Looks promising with the wheel on it.
IS THAT PISTON FROM DOMINANT ,I KNOW WISECO MAKES THEM ,LOOKING FORWARD TO THE BUILD I LOVE THE COMODARY BETWEEN ALL THE CHANNELS HELPING EACH OTHER OUT ,BUCKIN ,TINMAN,NICK PIXEL,IRONHORSE, BELLHOPPER ,TAZMAN, ONE BIG FAMILY 😁😁😁👍🏽👍🏽👍🏽 BE SAFE AND HAVE A GREAT WEEKEND
@@tinmanssaws Howdy, this is Dave from CCC Racing, we design a good number of pistons that Wiseco builds for us. If you need any help. parts, etc. just let me know. 365 special, 372xp, 372xpw, 372 big bore 52mm, OE346xp pop-up, NE346xp, NE346xp pop-up, NE346 big bore pop up 45mm, 181/281, 288xp, 066/660 pop-up, 066/660 big bore pop up, MS661, MS661 big bore, 394/395, 394/395 big bore, 272, 3120xp/084/088/ms880 big bore and many more :)
Some of those products get frozen or too cold once it ruins them for good. It can make it separate and won't ever set up correctly but some don't really matter I guess. I found some paint doesn't do well if frozen one year I worked refurbishing homes with no heat at night in the winter. oops.
Holy s***...tinman your going to be busy ...ive never held a wisco piston , you mentioned windows . the cut away sides would feed the transfers sufficiently yes/no...
922 ported vs pro mac 800 ported showdown?!?!?! Those Hyway parts are very nice. I've got a muffler that's my take on the Ironhorse style muffler for a 272. It's a little crazy looking. I will email you about it.
That little shiny spot on the bottom of the intake side is normal for even a brand new saw. it happens during test run start up on all saws. That piston you're looking at would be considered nearly new without the little scuff on the exhaust side. It clearly has all the machining lines indicating zero wear and no rocking whatsoever. If you're going to give lessons then please don't mislead people with bad info.
Hi Tinman Tim Staff here I have a pro Mac 1010 A I was wondering if you would like to work on Her really go through it port it and replace every thing it needs
Came her first from Steve, then Billy. Wish we had guys like you around here who actually knew this stuff and kept basic parts on hand.
So awesome to see Harvey and Buckin showing the love to the Tinman!! Can't wait to watch the builds and watch them run!
Its good to have friends!!
Hey Tinman . . . here I am up here in Ontario and a bit snowed in so just kickin' back havin' a pretty quiet Friday nite and as I watch you, you mention that it's tonite and all of a sudden I feel like I have company and a buddy over . Pretty dang cool . I got a 266 for fifty bucks a coupla days ago so pretty chuffed to follow along. Really likin' yer vids bud !
Nothin better then a 266 for $50!!!
We're all fired up! Let's do this. Hope Ironhorse is doing well!
Thanks to you ....found another passion ..being in production never worked on them ...HELPPPP
That’s gonna be a bonafide screamer! Nice looking parts!👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
Teasing me with that Johnny hanging from the shelf. Good stuff. Thanks Tinman!
I hung it up there just for you!!!
Ryan is awesome! Very helpful and very fast with gettn orders out.
I am assembling a 923 Homelite right now lol! Ported but nothing near the level you do. Can't wait to see it!
U definitely got my interest on the 923 .
Smittys channel👍 great fella, loves his old saws...
Seen buckins saw shop other day and WPW WOW. I
Sounds like we are going to have a bunch of awesome builds to watch this summer
That's a nice old saw tinman. So great you and ironhorse are collaborating with and for buckin Billy! Hes who got me into the 266xp originally. I've been running a stihl o44 since I started cuttin but since I got my rebuilt 266 I'm a husky convert. Cheers
A dirty old 266 was what made me a hunsky man!!
Happy Friday!!! Thanks Tinman for staying open late just for us!!!! Be safe...
Happy friday Chuck!!
Tinman's Lab is creating Monster Power Saws!!!
You are so fantastic for sharing your wisdom with us and educating your viewers.
We are Tinmanized and Loving It!!!
I enjoy working on 61, 266, 272. I'm going enjoy see what you do to Buckin chainsaw Haven't seen Ironhorse in a while good Friday night Tinman Thanks.
I have a 266 and a 268 and in all honesty I like running the 266 more its just a perfect saw so I understand the love for the 266
I've owned both, I found my 266s run better then the mint 268 I had.
@@tinmanssaws the 268 is even ported it was when I got it and shes not an easy starter the 266 on the other hand has a ton of compression and starts on the 3rd pull
i’ve got two of these. my grandad give me them. he got them when he retired from the forestry. one runs. the other just needs exhaust and new fuel line.
I'm going to throw the kitchen sink at a Homelite oh my Lord I lost it
@Tinman I've been using Three Bond 1184 for a couple years and it's a great adhesive and sealer compared to the one you are having trouble with in the cold. I'm in Calgary Alberta and my shop is about the same temp as yours!🥶 Hope that helps, good luck with your builds.😉👍
You’re an amazing guy tinman! Extremely knowledgeable and humble. I love watching your channel. And I can’t wait to see the echo turd saw put back together.
Myself and a ton of others would love to see you do a piped 750. I know risky cause of parts would be awesome!!
Thanks for the video Tinman! Take care buddy! 👍
Fri nite in the shop! Something to look forward to! Thank you for that! Pretty cold there I can see your breath and you are still sharing keep those hands warm.❤️
This community is now its own living organism. 💪🏻⚡️🪓 It has been amazing to watch you go from 1500 subs till now.
Keep spreading the knowledge my friend.
Kindness and love
You got some good stuff coming. The big Homelite will be interesting.
I absolutely love my Yugoslavia Tomos 266xp! I don't even have to brag about it being a badass, It speaks for itself! I had a neighbor walk by my house last week when I was cutting some big ol Douglas fir rounds an arborist dropped off in my driveway weighing around 600 pounds a piece! He said he could hear it barking two blocks away and no bogging down at all! So he told his wife that he was taking the dog for a walk and wanted to see what kind of saw he was hearing that sounded so good! So I started it up and handed it to him and told him to bark the throttle a few times to see how fast it RPMs. I could tell he was scared of the damn thing as soon as it torqued up in his hands and he immediately handed it back over to me and said, Oh wow! I have got to get me one of those! I informed him that the saw was 35 years old, And from Slovenia, And he would be about as successful as a one legged man in an ass kicking contest at finding one of these bad boys! And they just don't make them like they used too! I don't know if the saw was factory ported, Or if someone who new what he was doing with a rotary tool? But it sure is fun to get in the bite and watch the chips come out and bury your boots in seconds, Priceless!🤗
The first saw I ever turned a screw on was a 266SE. Your fireduppedness is contagious, brother! It took me a bit to build myself up to cutting the custom hood scoop you'll need for the big bore top end to fit. I looked and looked to try to find a 266 top cover and they are damn hard to come by!
Can’t wait for the homelite build!!!!
It should be interesting.
Love your channel bud! I hear ya on being excited for warmer weather and slapping saws together. Got a 272 and 268 I’m working on at the moment. Keep up the great work!
💪💪 I am running a 266se stock.
I think i will change the muffler a bit to see how it run.
Nice video😎
Love it Tinman thanks uncle Harv for the parts this is gonna get even more awesome brother. Thank you sir for the updates. 🌲❤🌲✊🪓
Sweet care package Ironhorse sent. Looks like the summer is going to be exciting with all these builds coming! Thanks TINMAN
My dad has a 266 parts saw I think I am gonna try to piece something together . Can't wait for your 266 build
Good saw good parts good for you tinmam
super excited for all these upcoming projects here thanks for everything you do brother! fingers crossed for some nicer weather up yonder.
i have a 266 that needs a new piston and jug and seen you post up this vid and cant wait to follow along. ironhorse and buckin are a couple of great guys
I watch all three of you. You are my favorite. Can’t wait to see the up coming content.
Your enthusiasm is infectious! Now you got me all fired up!
Now that’s a line up of saws!! Looking forward to all of these!
Have a good weekend bud!
Tinman’s Saws quote of the video “I’m the Mechanic and Not the Driver” great way to put it into perspective
i realize I'm pretty randomly asking but do anybody know of a good place to watch newly released movies online ?
@Misael Danny I watch on FlixZone. You can find it on google :)
@Jack Maxwell Yea, been using Flixzone for since march myself :)
@Jack Maxwell thanks, I signed up and it seems like a nice service :D Appreciate it!
@Misael Danny no problem :)
How was my week? Winter figured out it was winter here, dumped over a foot of snow, snow blower went TU... Great week 🤣😂🤣
Friggn rights boys! You guys are just freakn sending er!!! 🔥 really fun to watch 😎
I’m so excited for that big homelite
Wow, it looks like there are a lot of really cool builds about to happen. Can’t wait! And very cool of Harvey to send some parts! Have a great weekend Tinman.
Have a great weekend Lumberjack, always appreciate your comments.
I just put a wrap around handle on my Husky 61. Looks pretty good. I think the handle is from 395 or something like that.
The Buckin 266 build will be interesting.
I will be watching the 10-10 build closely. I have a free 10-10A I just got running and made a vid about it.
Thanks again Tinman.
Great to see you building buckin a saw.thanks to IRONHORSE got some nice parts to use.been missing Harvey lately. I'm an ironhorse type of guy..hes the best bullshitter...lol.
Where was the light coated piston sourced from, I'm also having hard time getting parts in Canada! Any suppliers advise to use or not to use would be appreciated thanks! Really enjoy your channel and the time u spend helping/entertaining/educating us is much appreciated!
I've been getting my stuff from HLSupply in the states. They've been reliable with a good selection.
Sounds like I have something to look forward to this summer!
Transfer duct hitting the flywheel is not unheard of on aftermarket cylinders, I have personally had one and heard of others. Have a good one.
Hey tinman! I've been working on a 268 for months, every time I put it together the saw fires up and races away! I've put new seals in it, new gaskets, etc! About ready to throw the thing out!
Of you can shoot some brake clean around the potential spots for air leaks while it's running you should find the leak, the brake clean lowers the RPM if it sucks it in. Walt at Afleetcommand has a couple videos on diagnosing leaks with it.
Check the intake, I believe those ones use the plastic block, sometimes they crac from being over tightened.
Best is using a pressure and vacuum tester like a mity-vac, about $80-$120, if you're doing many builds or much saw work, it's a good investment, good luck👍
@@jimssawsnstuff8903 Thanks Jim, yes I am a big fan of the Afleetcommand channel and recently used the brake clean trick to find a crack in a Jonsered 70E intake manifold(also plastic)... I really wonder if I have the crank seals in correctly. Will see if I can test it but the saw goes straight to practically max RPMs and I don't want to blow it up. Has a nice OEM gilardoni open port cylinder on it.
I’d really suggest the mitt-vac, I’ve got some stuff on it on my Instagram Jiminthemountains as well as a few other tips there
Hyway is very good stuff. I have been ordering direct from them, tends to be faster than ordering from the states. Weird part of being in Canada... Lol.
I really need to start making more content, no shortage of 266's over here in NW Ontario.
Just put together a very ugly 61/272 with a Hyway Nikasil popup top end, finger ports etc...
Have a VI922 in pieces on the shelf, Looks promising with the wheel on it.
IS THAT PISTON FROM DOMINANT ,I KNOW WISECO MAKES THEM ,LOOKING FORWARD TO THE BUILD I LOVE THE COMODARY BETWEEN ALL THE CHANNELS HELPING EACH OTHER OUT ,BUCKIN ,TINMAN,NICK PIXEL,IRONHORSE, BELLHOPPER ,TAZMAN, ONE BIG FAMILY 😁😁😁👍🏽👍🏽👍🏽 BE SAFE AND HAVE A GREAT WEEKEND
Not sure where that piston came from. You may be right..
It’s not a dominant, they have a .010 taper on the dome on the exhaust side................
Those pistons come from Definitive Dave at Chainsaw Conservation Componants. Tinman that piston would be good to put in that 52mm 372bb
@@tinmanssaws Howdy, this is Dave from CCC Racing, we design a good number of pistons that Wiseco builds for us. If you need any help. parts, etc. just let me know. 365 special, 372xp, 372xpw, 372 big bore 52mm, OE346xp pop-up, NE346xp, NE346xp pop-up, NE346 big bore pop up 45mm, 181/281, 288xp, 066/660 pop-up, 066/660 big bore pop up, MS661, MS661 big bore, 394/395, 394/395 big bore, 272, 3120xp/084/088/ms880 big bore and many more :)
@@JoviParagon hey Dave, if this is indicative of the quality of your pistons I'm super impressed. Quality 100%, thankyou sir.
Some of those products get frozen or too cold once it ruins them for good. It can make it separate and won't ever set up correctly but some don't really matter I guess. I found some paint doesn't do well if frozen one year I worked refurbishing homes with no heat at night in the winter. oops.
Hello tinman from Ireland, have 8 various 266s here including my father's who passed away back in 1992
266s are some of my favorites!!
Tinman, Ironhorse and Buckin. The Holly Trinity. I write this on bended knee.
The three guys walk in to a bar. It must have a saw bar!!!!!!!
Keep it up.
big block lombard 52 mm bore std so 80 or 85 cc in same size as xl 12 that be a good build
BILL BLOCK
I have 2-266’s an SE an a XP I’d love for a hot saw (for work as well longevity) but wit ball when can I send it lol... I’d love a saw from ya!
Great stuff tinman!! Parts have been very difficult. Harvey rules
Hey Erik, good to see ya here buddy!!
TURNIN SAWS WAAAAYYY UP! Can't wait!
Holy s***...tinman your going to be busy ...ive never held a wisco piston , you mentioned windows . the cut away sides would feed the transfers sufficiently yes/no...
I'm not sure thats the fun of it
I would assume those marks on the handle are from cork boots
Tim man almost at 10k! Wow just wow this is just crazy
Nah, that’s from a guy wearing caulks and stepping on the handle to start it.
I think you're right.
922 ported vs pro mac 800 ported showdown?!?!?! Those Hyway parts are very nice. I've got a muffler that's my take on the Ironhorse style muffler for a 272. It's a little crazy looking. I will email you about it.
That could be interesting!!look forward to your email buddy!!
Ironhorse is a good dude....
GONNA BE A GREAT BUILD
If I could subscribe again I would.I have a shop in New Brunswick,this stuff is super interesting
Go iron horse . Go tinman
U guys are champs
Damn, now you’re going to make me drive to KC and get a minty 266.................
👍👍👍
I'm putting a dominant in a 371xpg with full porting
Man I'm bummed buddy I jst gave a good 372 oe carcass to a buddy or ida sent her up to ya
looks like my husky 380 piston after it swallowed the screw from choke butterfly.
If you ever need a hard to find part. My buddy has 200 Husky saws for sale. Ont.
Iron horse is awesome
That little shiny spot on the bottom of the intake side is normal for even a brand new saw. it happens during test run start up on all saws.
That piston you're looking at would be considered nearly new without the little scuff on the exhaust side. It clearly has all the machining lines indicating zero wear and no rocking whatsoever. If you're going to give lessons then please don't mislead people with bad info.
😎Super
Almost looks like the piston was reused and the ring was changed.
Hey Tinman!
I have a 1989 Husqvarna 66. Whats the difference from my 66 to the 266? Thanks
Hi Tinman Tim Staff here I have a pro Mac 1010 A I was wondering if you would like to work on Her really go through it port it and replace every thing it needs
Can we get a parts list
Were is the follow up vid?
I have a 262 XP that I need to fix some fuel lines on. Can the cylinder/piston be changed out for a 266 or 272? Thanks
The 266 and 272 are built around a larger chassis then the 262 so unfortunatly no they don't fit.
If you cant find 372 i can send you one i think i have one
Someone is trying to sell me a poulan 361 and a 3450. Are these good saws
I could send u a 372xp as well if your wanting to do one I’ll pay for the work and parts
Half thank you hi Mama I’m at
Tôi thích nhưng video này tiếc là không có tiếng VIỆT NAM