Seadoo Spark manual reverse kit install

[@ronzstudio1981]

Man oh man , that cleared up alot of frustration ! My kit was missing some bolts, talk about confusion. Picked some up at the local hardware store , finally got er done!

[@rohmmie]

Thank you for those tips

[@Fikus555]

Hi. Thank you for the video.Just got the kit and Im missing P36 x 3 bushings, mine didnt come with a manual, try to see how it looks, may be if you still have the manual you can take a pic of that page? thank you!

[@MartyBergeron]

Where do u buy the kit at

[@dougscott1023]

Thanks John. It appears that you just loosened off the top counsole when installing the hand lever mechanism and drilling the hole for the reverse cable. The BRP instructions actually recommend removing the console entirely to do this.

[@MrJohnMclendon]

I removed the entire top cowling.

[@davidmarques3964]

Just bought one no instructions. Does anyone have one they can take pictures or scan over

[@alexxxela11]

Did you need to remove the handle bar top cowling from the top deck completely to drill the 3 holes or just removing the 2 screws from the top storage compartment did the trick? If so, how difficult was it to remove the cowling from the top deck

[@MrJohnMclendon]

I remove the entire top cowling for the whole process

[@BillMyers-i2y]

Once you remove the two bolts in the storage pocket, there's only two more screws in the front from the top side and pulling the wiring harness and large rubber wire grommet from the main body to remove the whole console for drilling and part installation.

[@adamhill2721]

was this done on a 2up or 3up?

[@brianrodriguez3921]

I Believe all 3 ups have IBR standard

[@MrJohnMclendon]

This was on a 2 up

[@BillMyers-i2y]

@@brianrodriguez3921 FYI My 2017 3up did not have IBR