This was my first Gan so I was a little frightened to do anything to the tensioning and such but I totally understand now, thank you! I also apparently overlooked the fact that I could change the corner magnets so that was good to know.
The 3 position switches on the corner pieces adjust how far out, or close, the triangle or hexagon internal magnets sit in relation to the core magnets. So essentially you have 6 settings for your turning magnet strength, how hard and sharp it snaps into position when completing a turn.
I tried the full range of limit and tension settings from the tightest to the loosest. It's still super stable at the loosest setting and not very squishy at all, though there will be an occasional floppy snap, which I decided I didn't need. The other end of the spectrum is also excellent. Despite the graph in the documentation, corner cutting doesn't get significantly reduced until a limit setting of one (at least for my tastes). Again it's super stable at the loosest setting, but it made perfect sense to go with the tightest limit setting that was comfortable on the corner cutting; and for me that was 2, though 3 is great too. From there, I adjusted tension to taste (second click/step three [however you prefer to count]). What a great cube.
Just what I wanted, the smallest commercially available flathead screwdriver! Thanks for the guide, SCS. I won this cube as my first GAN Cube besides the 354 v1 with no nuts (I wont the 11m Pro from a Cubicle giveaway XD)! But this is amazing, thank you and best wishes!)
My GAN 11 M Pro is coming for Christmas and i never owned a GAN cube before. Thanks for the video. It isn't that overwhelming anymore. Keep in mind, i said "that overwhelming anymore".
Hey Cameron, i was just wondering what lubes do you put in the 11 M Pro when you pay for the pro setup option? I bought one with that option and was just wanting to know what lubes to buy for it when i need it
When you're removing the numerical distancing nut, is it possible for the tension to get messed up? I turned mine from the default to 4 and it keeps popping. Please help
Really INFORMATIVE VIDEO; it was very helpful. I look forward to adjusting my coming GAN 11M PRO using the acquired knowledge from this video. Ans, I have on question. Is the DARK BLUE nut for a tighter tension or looser?
The Floral blue has 2 settings. 1 and 3 Setting 1- Tightest very stable Setting 3-Loose. Kinda unstable Dark blue also has 2 settings 2 and 4 2-Looser than 1 but tighter than 3 and 4 4- Loosest setting. Very unstable,could pop and will corner twit easily.
On my 11 pro wich nuts will make it tighter. I'm on dark blue and it's to loose. I am a hard snappy turner. If the dark blues are the tightest I guess I will Dig and gav the lube it
The magnet adjustment doesn't change the corner magnets under the plastic it only moves the corner stock magnets closer and Farther from the core magnets.
Geary video, really helpful :) Just a question though, are you sure that the triangular magnets are weaker? I tried them in my 11 M Pro and they seem stronger to be honest.
what about the extra set of magnets? not the triangle or hexagon ones, but some really tiny magnets that came in a plastic bag? do you replace them with the core ones or put them on top of the core ones?
I have a question. I have it on distancing setting 4 (most distance allowed, I assume), and it still cannot corner cut 45 degrees. Is there a way I can verify why this happens?
The corner mechanism: Does it control the center-corner magnets or the corner-edge magnets? Saw some reviewers saying the one and some the other and I'm confused 🥴
It moves rhe the corner core magents it moves the magents in the corners it will change the distance from the corner from the core magnets hope this helped
Watch Shawn from Speed Cube Review. In His Gan 11 video you can see the corner stock magnet move in and out of the corner piece when he moved the corner adjustment. Time Stamp: (4 : 10)
@@jacksoncuber8626 ok. The black internals might look better but the primary internals are better for speed solving. It reacts better to lube, gives a smoother feel and overall leads to less lockup’s and fluid solves. That’s why I think that. Saying because I have an 11m black,primary and an xs. Hope I help.
0:14 "168 customization possibilities". Apologies, but I'm cursed with a computer science degree--and therefor obsessed with the correct counting of things. Correct me if I get any of this wrong, because I'm not perfect and get hung up on things that aren't relevant. But assuming that you want a symmetrical setup, there are 3 corner magnet settings, 3 core-magnet settings (including removing the magnets that interacts with the core), 4 center-travel (center-spring) limit settings (combined across the two different nuts), and 7 spring tension settings. Funny that the product documentation says there's only 6 spring tension settings. I had to pop a cover to count it correctly myself. What you do is go around until it pops. That's one, not zero. It's a classic off-by-one error. We computer science people are so silly. Anyway, allowing for 3 core magnet settings: 3 * 3 * 4 * 7 = 252.
Idk why but my reply got deleted I said that SCS has 15$ shipping for Asia as well. And if u spend a certain amount u can get free expedited shipping. The current rate for free expedited shipping is to spend 14.5k inr.
@@sarikasawhney2278 yeah like everyone has 14.5 thousand rupees right in their pockets. My 6 month school fee itself is around 12k🙄😏 I can buy a brand new cycle with 14k I think you are quite rich Aap log kabhi middle class cuber ka dard nahi samjhoge Kisi ek jamane mein hame bhangar brand cube se cubing karni padti thi! And for your 15 dollar question, we have to face 15000 questions for so much money. some common lines from our mahan parampujya matashri and pitaji: Website safe hain kya? Scam to nahi? Apan paas wale dukan mein bhi milte hain.Kyu paise waste kar raha hai? Beta, padhai kar. Ye bohot mehenga hai.(Even though I get about 100% in every exam!) Kitne cubes hai re tere paas, aur kya chahiye! (Only 6 cubes hain!) Ye itna mehenga liquid kyu le raha hain? (lube) paani use kar na! In middle class families, and even 15rupees is " *too much* " for a child (Child aging from 0-16 years!) to give! He/she might lose it, or worse, overspend it! Sirf sabji/samaan lane ke liye paise milenge! Mujhe hi pata hain, mein cubes kaise liye hain! Jaane do, Gan user kya jane YLM wale ka dard!!
I don't understand how the center blue nut is supposed to adjust corner cutting as the only thing it seems to do is adjust the anchor point of the clear spring loaded nut. So it's just added or removing preload from the clear nut. In other words- adjusting which blue center nut you use, which setting its on, or which setting the clear spring loaded nut is on, are all doing the same thing- adjusting the tightness of the center piece.
Hey Speed Cube Shop, I have been trying to find a good setup for the Gan 356 air m, and I was wondering what SCS Lube you would recommend for that particular cube, if you have a suggestion please let know , that would definitely help me a lot 👍🏻👍🏻
![GAN 11 M PRO // IS THIS THE BEST SPEED CUBE ON THE MARKET? [GIVEAWAY]](http://i.ytimg.com/vi/S19LvZGFZa0/mqdefault.jpg)
![GAN 11 M PRO // IS THIS THE BEST SPEED CUBE ON THE MARKET? [GIVEAWAY]](/img/tr.png)
Great video, now all I need is a gan 11 m pro
Same man...
Same...
Ya same
Lmaoo
yeah same
The gan 11 m pro looks awesome with black internals
Agreed.
Yes
@Rafael Mendez nice
Mine is black internal too.
Mine is black internal to
One cube, four versions, insane customizability, great performance .... what could you ask for better than that.
Great price.....
Should've added except for that
Now 5 version, coz they added the sticker
less catching lol
gan 13
I can’t even pop out the Center without me thinking that my Gan 11 M pro is gonna break
Exactly I just opened mine today!
Same
@@thorbenmaas7848 same
I went to order it but when i used the discount code and payed i remembered i am broke
Me too
This was my first Gan so I was a little frightened to do anything to the tensioning and such but I totally understand now, thank you! I also apparently overlooked the fact that I could change the corner magnets so that was good to know.
hhhm funny this is also my first gan
Same too!
The 3 position switches on the corner pieces adjust how far out, or close, the triangle or hexagon internal magnets sit in relation to the core magnets. So essentially you have 6 settings for your turning magnet strength, how hard and sharp it snaps into position when completing a turn.
I tried the full range of limit and tension settings from the tightest to the loosest. It's still super stable at the loosest setting and not very squishy at all, though there will be an occasional floppy snap, which I decided I didn't need. The other end of the spectrum is also excellent. Despite the graph in the documentation, corner cutting doesn't get significantly reduced until a limit setting of one (at least for my tastes). Again it's super stable at the loosest setting, but it made perfect sense to go with the tightest limit setting that was comfortable on the corner cutting; and for me that was 2, though 3 is great too. From there, I adjusted tension to taste (second click/step three [however you prefer to count]). What a great cube.
I’ve had this cube for over a year now and only just learned how to properly customise it so thanks a lot!
I ordered mine yesterday this information goona be really helpful thanks!
Just what I wanted, the smallest commercially available flathead screwdriver! Thanks for the guide, SCS. I won this cube as my first GAN Cube besides the 354 v1 with no nuts (I wont the 11m Pro from a Cubicle giveaway XD)! But this is amazing, thank you and best wishes!)
My v1 was so bad the nut unscrewed itself
Thank you Cameron! This tutorial helped me a lot!
Great video Cameron keep up the great work!
Thank you for this video this is my first customizable cube and this video made it less depressing
Nice! I needed this
I was messing with it and turned the tension nut clockwise and it popped and a piece came out put it back in just fine but did I mess anything up?
I love the vid for the corner magnet strength thx
My GAN 11 M Pro is coming for Christmas and i never owned a GAN cube before. Thanks for the video. It isn't that overwhelming anymore. Keep in mind, i said "that overwhelming anymore".
thanks now i can easily customize this cube
keep it up
Hey Cameron, i was just wondering what lubes do you put in the 11 M Pro when you pay for the pro setup option? I bought one with that option and was just wanting to know what lubes to buy for it when i need it
3:58 isn't it 2 and 4 on the dark blue
Yes
Ahahahah
Awesome... so helpful from a newbie. Appreciated
Newbie? He better than u
thank you! i can now fully customize it!
Thanks it was very helpful!
What do you think is the best lube/ lube combo for this cube?
Worked very amazing
Where did the UV coated gan 11 m pro gone? I was planning to save up and buy it. Pls put it back.
gan stopped selling the us coated
uv*
Thanks! Learn cube off the net, you r a great help
Can you Lube it without breaking the adjustments that can change the corner magnet strength?
Great video...but what abou the nemebers on the corner's magnets please?
Hey SCS can you please tell me what are the default settings for the gan 11 m pro
what loosens it on the blue thing, is 1 loose or 4 loose?
I didn’t realise that I ordered mine a stickered cube until I got it. Is there any chance I could return it in exchange for a stickerless cube?
Thank you so much Cameron! I managed to fix my gan because it almost broke.
When you're removing the numerical distancing nut, is it possible for the tension to get messed up? I turned mine from the default to 4 and it keeps popping. Please help
you make popping out the center cap look easy
I ordered a cube from your website and I live in Sa. How long will it take to get here.
I like changing the mangnets and putting the hex magnets but I used tweezers instead of my fingers
Very very good cube
I am having a hard time removing the triangle magnets, any tips how to remove it. On the video , it looks so easy.
Nice! My GAN 11 M Pro (From SpeedCubeShop of course) will arive tomorrow, Can't wait to start customizing it!
SCS said that my uv coated version will be delayed
For the light blue nuts, if the number is high does it mean its tighter?
How do you deal with carpal tunnel?
The cube come with what number in the tensions?
Eeeeee idk y im saying this here but my valk 2 m and my timer is comin today so im suuuper excitedd
did you get them yet?
@@christhomas6063 lol yee
My cube has 2 customization. Lubed and unlubed :b
If it has screws, it's practically infinite
@@StaticNebula26 obviously you don’t know, what infinity is
@@lennygeee the planck length limits it to countable, so its practically infinite
yes
@@StaticNebula26 yes i noticed it
I have an issue during the solve the corner's magnets changes from 1 to 2 or 2 to 3
This is why tingman ranked your thumbnails as the best
Nice video!
U R’ the best man
Really INFORMATIVE VIDEO; it was very helpful. I look forward to adjusting my coming GAN 11M PRO using the acquired knowledge from this video.
Ans, I have on question.
Is the DARK BLUE nut for a tighter tension or looser?
The dark blue nut has settings number 2 and 4, so basically yes, it is.
The Floral blue has 2 settings.
1 and 3
Setting 1- Tightest very stable
Setting 3-Loose. Kinda unstable
Dark blue also has 2 settings
2 and 4
2-Looser than 1 but tighter than 3 and 4
4- Loosest setting. Very unstable,could pop and will corner twit easily.
@@sarikasawhney2278 Thank you so much for informing.
@@porglomber Thank you
so much for informing.
@@Sheikhm007 thx
Do you goes only have the frosted ones in stock/ when should we expect the soft variation to be shipped?
never now
@@Zyrilix lol I was able to get the soft variation and the uv one.
what is the deafult tension?
Great video
On my 11 pro wich nuts will make it tighter. I'm on dark blue and it's to loose. I am a hard snappy turner. If the dark blues are the tightest I guess I will Dig and gav the lube it
Is this frosted or soft?
The magnet adjustment doesn't change the corner magnets under the plastic it only moves the corner stock magnets closer and Farther from the core magnets.
Interesting video!
Geary video, really helpful :) Just a question though, are you sure that the triangular magnets are weaker? I tried them in my 11 M Pro and they seem stronger to be honest.
Same actually
@@timspencer520 they arent the same
@@purplespacesnail6836 he meant he thought the same, he didn't say they were the same.
Cameron please help I was doing the distancing but part and the hexagon thing and the plastic just popped out
what is the original tension
I'm getting this cube
bro, in gan 11 m pro which stronger magnet triangel or hexagonal?
Hexagonal
Can someone pls tell me how to tighten cube cuz every time I play with it it just pops
what about the extra set of magnets? not the triangle or hexagon ones, but some really tiny magnets that came in a plastic bag? do you replace them with the core ones or put them on top of the core ones?
well here goes nothing, i'm putting them on top of the original core magnets in hope for stronger overall magnets
well it didn't work, the extra magnets are obstructking the whole thing and it moves terrible
I have a question. I have it on distancing setting 4 (most distance allowed, I assume), and it still cannot corner cut 45 degrees. Is there a way I can verify why this happens?
Because the higher the number the tighter which makes it more pop resistant but less cornercutting
Thank you so much.
when I try, I can't get the center cap off :( and it a little too tight to :/
Uh i need help i turned the tensioning system thing clockwise and now my entire white layer came off and im panicking
AY CAMERAN MA FRWEND YAAAAAAAAA POG
4:08 How? 😯💨 By using the hextangle magnets?
What version of the Gan 11 pro is that?
Probably the frosted one with black internals
The corner mechanism:
Does it control the center-corner magnets or the corner-edge magnets?
Saw some reviewers saying the one and some the other and I'm confused 🥴
It moves rhe the corner core magents it moves the magents in the corners it will change the distance from the corner from the core magnets hope this helped
Watch Shawn from Speed Cube Review. In His Gan 11 video you can see the corner stock magnet move in and out of the corner piece when he moved the corner adjustment. Time Stamp: (4 : 10)
hex core magnets + setting 1 on corner magnets = ideal roux set up
Hey scs i want a cube be here in kenya africa can you supply one
What’s the song in the background?
I ordered mine 1 week ago, now I wont need to watch this with a meaning
Is there an SCS email list?
what song is this?
Hi speed cube shop and cameron
SCS intro is so nice...
Thanks cameron
i just got an XS like a week or 2 ago ;-;
i got one! this is AMASING
Difference between light blue nut and dark??
Different levels of elasticity
Would anyone exchange a 30-40$ cube for the gan 11m pro black internal/uv coated. I don’t like the 11m pro that much.
I’m thinking about buying the GAN 11 M Pro. Should I get black or primary internals? 🤔 what are your thoughts?
Primary
@@sarikasawhney2278 thank you for your opinion
@@jacksoncuber8626 do u want the reason for why I think that?
@@sarikasawhney2278 yes
@@jacksoncuber8626 ok. The black internals might look better but the primary internals are better for speed solving. It reacts better to lube, gives a smoother feel and overall leads to less lockup’s and fluid solves. That’s why I think that.
Saying because I have an 11m black,primary and an xs. Hope I help.
Do you ship in Pakistan
Even on the tightest tension setting my cube is still super loose. Anyone know what might be happening?
try out tightening elasticity dude
@@Usha_Prasanna I got it figured out. Just had to break it in more
1:04 Doesn't each corner piece have 3 adjustments (because it has 3 "inward"-surfaces), thus totalling 24?
No
thats not how it works
thanks cameron
The Gan 11 Pro with black internals looks the same as the stickerless Gan xs actually
Mee too I also want gan 11m pro
0:14 "168 customization possibilities". Apologies, but I'm cursed with a computer science degree--and therefor obsessed with the correct counting of things. Correct me if I get any of this wrong, because I'm not perfect and get hung up on things that aren't relevant. But assuming that you want a symmetrical setup, there are 3 corner magnet settings, 3 core-magnet settings (including removing the magnets that interacts with the core), 4 center-travel (center-spring) limit settings (combined across the two different nuts), and 7 spring tension settings. Funny that the product documentation says there's only 6 spring tension settings. I had to pop a cover to count it correctly myself. What you do is go around until it pops. That's one, not zero. It's a classic off-by-one error. We computer science people are so silly. Anyway, allowing for 3 core magnet settings: 3 * 3 * 4 * 7 = 252.
My 11 m pro popped into plastic pieces on my first day you saved my life
Alternate title : Making an unaffordable cube even more unaffordable
Oh yeah, and don't forget that extra 32 dollar shipping
Shipping is free for me. 🤷🏻
Idk why but my reply got deleted
I said that SCS has 15$ shipping for Asia as well. And if u spend a certain amount u can get free expedited shipping. The current rate for free expedited shipping is to spend 14.5k inr.
@Rayyan Humayun ya. In india the shipping cost is approx $14.98 for the standard shipping.
@@sarikasawhney2278 You can Buy your Cubes in Cubelelo which is an Indian Based Cube Store
And you can also use MACubing Discount Coupon
@@sarikasawhney2278 yeah like everyone has 14.5 thousand rupees right in their pockets. My 6 month school fee itself is around 12k🙄😏
I can buy a brand new cycle with 14k
I think you are quite rich
Aap log kabhi middle class cuber ka dard nahi samjhoge
Kisi ek jamane mein hame bhangar brand cube se cubing karni padti thi!
And for your 15 dollar question, we have to face 15000 questions for so much money.
some common lines from our mahan parampujya matashri and pitaji:
Website safe hain kya?
Scam to nahi?
Apan paas wale dukan mein bhi milte hain.Kyu paise waste kar raha hai?
Beta, padhai kar. Ye bohot mehenga hai.(Even though I get about 100% in every exam!)
Kitne cubes hai re tere paas, aur kya chahiye! (Only 6 cubes hain!)
Ye itna mehenga liquid kyu le raha hain? (lube) paani use kar na!
In middle class families, and even 15rupees is " *too much* " for a child (Child aging from 0-16 years!) to give! He/she might lose it, or worse, overspend it! Sirf sabji/samaan lane ke liye paise milenge!
Mujhe hi pata hain, mein cubes kaise liye hain!
Jaane do, Gan user kya jane YLM wale ka dard!!
What happens if you accidentally turn it clockwise?
I did that and for some reason my cube only has 4 tensioning settings now and pops up after
1% people using their imagination having a GAN 11 m pro😅
I gonna buy one it my 2nd 3x3
I don't understand how the center blue nut is supposed to adjust corner cutting as the only thing it seems to do is adjust the anchor point of the clear spring loaded nut. So it's just added or removing preload from the clear nut. In other words- adjusting which blue center nut you use, which setting its on, or which setting the clear spring loaded nut is on, are all doing the same thing- adjusting the tightness of the center piece.
Hey Speed Cube Shop, I have been trying to find a good setup for the Gan 356 air m, and I was wondering what SCS Lube you would recommend for that particular cube, if you have a suggestion please let know , that would definitely help me a lot 👍🏻👍🏻
Wish I had that cube.😔