I totally disagree with him cuz no one uses that corner cutting , if u think he used that well that means hes sucks. Im 11-12 seconds i never have that problem and i Will never use that corner cutting
That's horrible to get something so cheap and be forced to pay so much more. In California is just a simple 3$shipping charge for a normal purchase. About-give or take- some money. That could force someone not cube for prices that high...
In malaysia,we actually have to multiply us currency with 4.6,so then a Gan356 X will cost 276 malaysian currency and tht costs alot. Im actually bummed by this.
I know that this video is old now but I was just doing some testing about what you were saying about the reverse cutting. What I've decided is that it's the ridge on the center piece. The ridge will stop the edge from twisting as much as on other cubes. The reason why some cubes (like the tengyun) are worse is that there is not flush contact between the center and the edge, allowing more room for twisting. Although what you are saying is correct, that alone isn't enough to make any of them actually work.
I tested some more cubes and I was wrong, you might be on to something, I think it's not the room inside though it might be the fins on the edges, the tengyun has fins but they're tiny compared to the gts3's.
So, I ordered this cube up based on this video showing how quiet it is. I do a lot of night solves in bed next to my wife while she is falling asleep and was looking for something quiet as to not disturb her. Moving from a GTS 2 M. Really hope there is a noticeable difference.
@@tennismaster6640 if you're averaging 1-2 minutes you should go for the rs3m 2020. amazing cube, low price, amazing for begginers (also amazing for intermediate and advanced solvers but u get my point)
If you are averaging 1 to 2 minutes get faster learn cfop then get rs3m 2020 but clean it and lube it trsut me I dditn clean it nor lube it and it couldn't even corner cut 15 degrees and now that I did I can corner cut 50 degrees it's really stable with extra magnets and quite fast
I picked up one and lent it to Coach Tabe Cubing for an unboxing and review. I'm nowhere near sub 15, so this might be the cube for me. I was impressed with the Zhanchi from DaYan -- as it was such a leap of improvement over what was available then. So I'd like to see DaYan get back into the game.
It’s my main, but the issues you have are the exact issues I have. I don’t like any other cube that I own (including the gan air um and the cubicle pro shop Valk power m) due to the magnet strength/speed. I’m thinking of getting the gts3m but I’m happy with this cube for now
@@tennismaster6640 since you are only a beginner, you don't need any fancy cubes, once you get more experienced you will be able to tell which cube you like so it isn't necessary to spend a lot of money for such a cube at an early stage.
This cube is my main, I do see that corner cutting issue, but it hasn't caused any real problems for me when I solve on it. I don't really know if all TengYuns are like that, or if I just have a really good one, I have no idea, but it is my main, and that will probably not change for a very, very long time.
Im looking for a new main bc my rs3m has started slowing down but i also wanted something relatively quiet. Im not the fastest turner so this cube looks perfect for me. Thanks for the brilliant review :)
Hey J Perm! Love your videos so much but I have a question. Should I get the Dayan Tengyun M, or the Yuxin Huanlong M? I'm pretty torn between the two and I just need a professional to tell me which one is a better puzzle! Thanks!
the reason you don't feel that it cornercuts that well is probably that in comparison to its super fast and smooth normal turning, cornercutting requires more effort. maybe try slowing it down with some heavier lube and then it should feel much better.
I just learned intuitive F2L from one of your tutorials. Atm my execution itself is alright but it takes quite a while for me to see the pieces I need to make the pairs. Does this just take practice or is there a better way to learn to see the pieces quicker?
Great review :) I'll have to give it a try. It would be nice if you would include where each of the magnet sets on the 356X fall in your Strength vs Speed graph though.
It's very refreshing to actually hear new stuff in reviews. :) 10/10 for the corner cutting Explanation.👌👍
This
I like your logo . its gohan
I like anime
What da fuck I was Just watching you ahh. Never knew you cubed until I found this 1 year old comment
I totally disagree with him cuz no one uses that corner cutting , if u think he used that well that means hes sucks. Im 11-12 seconds i never have that problem and i Will never use that corner cutting
I watched a 2 min ad for you.
Love from New Zealand, where cubes cost a crap ton, quite rare, and where shipping also costsssss alooooot.
poshua piiim I bought a 12 dollar “cube”, and it cost around $30 with shipping.
Use cubezz. It’s always free shipping.
Aidanplays22 is it a discount code
That's horrible to get something so cheap and be forced to pay so much more. In California is just a simple 3$shipping charge for a normal purchase. About-give or take- some money.
That could force someone not cube for prices that high...
@@IllShivyou r u feeling good? YeS iTs A dIsCoUnT cOdE.
Of course not. Its a cubing website. Free shipping and cheap cubes.
It’s because there’s more space in the middle area between the pieces of the tengyun. This lets the pieces move more relative to each other
That could be right but the gan x had the same problem and that has almost no gaps
1:30 They also revolutionized stability in 2011 with torpedoes on the LunHui, ZhanChi, and then GuHong V2 and LingYun V2 in 2012.
"Do you want the 60$ Gan356 X for half the price? Well you're not getting it" 😂😂😂
Lol
In malaysia,we actually have to multiply us currency with 4.6,so then a Gan356 X will cost 276 malaysian currency and tht costs alot. Im actually bummed by this.
TSM_Myth I’m Malaysian a chinese website sales the gan x for rm189
sean cuber yea
@@tanyile4270 in my country you multiply it by 50 then its 3000 but I saw a site that sells it for half the price
ShengShou Aurora + modern hardware + stick of butter = DaYan Tengyun
Twistii Cuber hi
not quite
+magnets
The Cubing Cuber magnets=modern hardware
Hi
7:45 “Oops. That worked for some reason”
Pretty much sums up my mood when I get (what I consider as) a pretty decent solve with the MGC V2.
At 6:31 and 7:02 he explained how moment of inertia and friction works on corner and edge piece ....
AWESOME!!!!!
"Do you want the $60 GAN 356X for half the price? Well you're not getting it."
GAN 356M: allow me to introduce myself
EpicNinja46 😂😂😂
Tengyun v2 to gan 356m: oh hi, little brother.
Right though
y u copy
Dayan Tengyun v2 is better lol
I know that this video is old now but I was just doing some testing about what you were saying about the reverse cutting. What I've decided is that it's the ridge on the center piece. The ridge will stop the edge from twisting as much as on other cubes. The reason why some cubes (like the tengyun) are worse is that there is not flush contact between the center and the edge, allowing more room for twisting. Although what you are saying is correct, that alone isn't enough to make any of them actually work.
I tried this experiment on a little magic which doesn't have ridges and it worked mostly good, so I don't think that's the reason
I tested some more cubes and I was wrong, you might be on to something, I think it's not the room inside though it might be the fins on the edges, the tengyun has fins but they're tiny compared to the gts3's.
I've been waiting for so long for this
Like 1 week?
Me too
Best cubing channel!
ezcubing: no i am!
@@charon116 no u! Oh wait..
shengshou: we are coming back!
witeden: hold my beer
alpha: beer my hold
dayan: hold my beer my hold
EDIT: Woaj likes
I'd love to see a modern Alpha
Hey Bruce
@@MCubes hello
BSK Cuber why hello
@john tan wut
I just bought mine today. I'm really excited. It will be my first magnetic cube
Is it good?
J perm:This is why the GTS 3 is my main
Gan:heres the gan xs
J perm:Scratch that
Lol
6:22 it’s just a theory. A CUBE THEORY
It is 24:00 now in my country, you uploaded this video right at 12pm that insane :)
Similar with me
He can schedule the video lol
@@JIAYANG its 19:30 in my country xdd
Wait are you from Vietnan
@@brandodio5910 You can see from her/his name :p
You're one of the best youtubers on earth!
"Do you want the 60$ Gan356 X for half the price? Well you're not getting it"
Gan - Hold my 356M
FINALLY dayan returned
DAYAN IS BACK...
?
yes
LOVE the beginning
Dayan is back !!
this video is the first video that inspired me to get into cubing i was like WHATTTTT when u turn fast thank you Jperm
Every cube companies' target:
Make a cube as good as gan x but the price is half of gan x's price
Gan cube companies' target:
Make a cube as good as gan x but the price is twice of gan x's price
other account *better than the Gan X
A half gan x
Gan cube company's target:
Make a cube that is half as good as Gan X but the same price
and also fail
great review! i have already ordered the dayan tengyun and waiting for it to arrive! glad you to take the time and effort to make this video!
Is it good? Stable?
im not even gonna lie i really like the inside and outside look of the tengyun
3:08 I don't know about anyone else, but I have never in my entire life done this kind of a move.
So, I ordered this cube up based on this video showing how quiet it is. I do a lot of night solves in bed next to my wife while she is falling asleep and was looking for something quiet as to not disturb her. Moving from a GTS 2 M. Really hope there is a noticeable difference.
Lol update?
and what happened? 👀 i have the same problem, I want to do night solves too
Considering that I love over turning cubes, this is my best cube yet.
2:32 Your speed is INSANE!!!!!!!!!
Yes
3:15 if you loosen the cube, it works
I love this cube. I've been using dayan cubes since the guhong, it's crazy how far they've come
How much smototh is it
@@mearttofan2572 what do you mean?
@@chimchu3232 I heard this cube has great slices, is it true?
I want to get this so I can practice in the mornings
I am beginner, I mean I know to solve it in 1-2 minutes with original rubics cube, should I buy this?? If no which one?? PLEASE HELP
@@tennismaster6640 if you're averaging 1-2 minutes you should go for the rs3m 2020. amazing cube, low price, amazing for begginers (also amazing for intermediate and advanced solvers but u get my point)
@@caioellery9117 I ordered this one already... thanks
If you are averaging 1 to 2 minutes get faster learn cfop then get rs3m 2020 but clean it and lube it trsut me I dditn clean it nor lube it and it couldn't even corner cut 15 degrees and now that I did I can corner cut 50 degrees it's really stable with extra magnets and quite fast
@@tln_greks2896 thanks man
The quality of your videos have improved really very much. Keep improving.
Good job
Told you I’d say good job on every video from now on
I will be the judge of that.
Steve Henderson thanks man
I won it for free on the speedsolving discord and thought it was the quiètes cube I’ve ever had
At last!! Waiting for it so long!! You r the best j perm!! Thx a lot for this review!!
How Many Other J Perms Are There?
Wow there are sooo many cubes in the market. I'm still buying Moyu Gts3m
This cube sounds perfect for me
I picked up one and lent it to Coach Tabe Cubing for an unboxing and review. I'm nowhere near sub 15, so this might be the cube for me. I was impressed with the Zhanchi from DaYan -- as it was such a leap of improvement over what was available then. So I'd like to see DaYan get back into the game.
Everyone else: Dayan Tengyun M
Me: Dylan Tengyun M
I have never seen a cubing video so informative before
2:32 that was smooth
Yeah the cube looks amazing.
Dude is this better then the Valk power
N.P. Cubing I doubt it
physics with Jperm
top cubers i think you are one of the top cubers
Can you make a video or unboxings or tutorials about non - WCA puzzles? It'll be really fun to see you doin' those stuff.
Finally someone that’s subscribed to pewdiepie
The best review i seen ever 😮😮
Nice analysis of the mechanics!!!
I didn't know there was still active Speedcuber channels!
BTW love the video!
Whoa he is improving
It’s my main, but the issues you have are the exact issues I have. I don’t like any other cube that I own (including the gan air um and the cubicle pro shop Valk power m) due to the magnet strength/speed. I’m thinking of getting the gts3m but I’m happy with this cube for now
"Do you want the $60 Gan X for half the price?"
Gan 356m
lmao
I am beginner, I mean I know to solve it in 1-2 minutes with original rubics cube, should I buy this?? If no which one?? PLEASE HELP
@@tennismaster6640 I would recommend the RS3M2020.
It is an amazing cube and it is extremely cheap at only $10.
@@dpage446 and why not this one, is it too fast for beginners? THANKS SO MUCH FOR ANSWER
@@tennismaster6640 since you are only a beginner, you don't need any fancy cubes, once you get more experienced you will be able to tell which cube you like so it isn't necessary to spend a lot of money for such a cube at an early stage.
I was half expecting the last solve to be an outtake where the cube popped or something.
This cube is my main, I do see that corner cutting issue, but it hasn't caused any real problems for me when I solve on it. I don't really know if all TengYuns are like that, or if I just have a really good one, I have no idea, but it is my main, and that will probably not change for a very, very long time.
Im looking for a new main bc my rs3m has started slowing down but i also wanted something relatively quiet. Im not the fastest turner so this cube looks perfect for me. Thanks for the brilliant review :)
Wait if you mean like the turning starts slowing then just clean it out and then add lube adding lube first is not a good idea
2022 and this cube is still amazing
My main cube 😎
That turn speed at 2:32!!!
Wow
This Cube Very Smooth
Well played J Perm, now I want this cube.
I Already have a 356 xs and bought that bad boy to not annoy classmates and my family while driving
Dylan Tenyung is so good
Jperm have you tried out the different springs? when I did that it helped a bunch
6:44
hMMM...
*Moyu GTS3M TengYun in 2050?*
Too bad the world ends in 2020
@@joobin814 too bad its 2021 now
@@3_peri790 I'm just dead
@@joobin814 nope
my new main its rly good
2:23 rip cube (and laptop)
2:23 nice +2 bro
Your reviews are really cool,J Perm!
now its time for dayan tengyun v2 m
True. It's amazing and is my main
Ur so close to 300 k subs
My boi verified okaay okaaay
Wow nice bro 👍👊👌👋👏
The only thing left is what’s inside the center caps. So far no youcubers have talked about it
I'm going to buy the cube
Lucas etter won his second comp after a year !! Yay
Thanks for the review again
Do fmc next
Dude your theory is great wnd I think its right on point. Keep up the great work!
Well that start crushed my dreams fast
Hey J Perm! Love your videos so much but I have a question. Should I get the Dayan Tengyun M, or the Yuxin Huanlong M? I'm pretty torn between the two and I just need a professional to tell me which one is a better puzzle! Thanks!
I think the huanglong is a little better but the tengyun is very quiet
@@JPerm thanks?!
Oops didn't mean to add that question mark
@@reptotties7410 just edit it
When describing ideas, the phrase is either, "hold a ton of water" or "carry a ton of weight". You said "hold a ton of weight" 7:12
This is very useful for roux users like me because it has a good m slices
Can you make a video on sponsorship and how you got sponsored and also how you grew your channel?
the reason you don't feel that it cornercuts that well is probably that in comparison to its super fast and smooth normal turning, cornercutting requires more effort. maybe try slowing it down with some heavier lube and then it should feel much better.
I just learned intuitive F2L from one of your tutorials. Atm my execution itself is alright but it takes quite a while for me to see the pieces I need to make the pairs. Does this just take practice or is there a better way to learn to see the pieces quicker?
just takes practice
Okay
6:30 (that's called torque)
I clicked on this vid thinking it was a vid about the newest dayan tengen
Tengyun
The gts3 can do that because the corners don't have those small spikes that stop it from corner twisting, instead it is round
gts3m is also my main because of cornercutting and ridges and stickerless
Nice video!
thank u j perm
Bruh never in my life have I made a turn like that 4:00
Sounds like MGC V1
Edit: I just realized he used it later in the video
I just bought it
Great review :) I'll have to give it a try. It would be nice if you would include where each of the magnet sets on the 356X fall in your Strength vs Speed graph though.
So someone actually did a review after setting it up