✅ ANSYS DESIGN MODELER - Basic Tutorial 1 - EXTRUDE, REVOLVE, SWEEP, SKIN/LOFT
HTML-код
- Опубликовано: 11 сен 2024
- *************************************************************
Donation:
Bitcoin: 3MEiS2XFQcDxZESbVF7HErDU7Fp55UxTBV
PayPal: www.paypal.me/...
*************************************************************
Basic tutorial using Desing Modeler in Ansys:
cfd.ninja/
ansys tutorial
1. Extrude
2. Revolve
3. Sweep
4. Loft
ANSYS WORKBENCH
#AnsysDesignModeler #AnsysExtrude #AnsysRevolve
Great video! Thank you!
+Jonathan Pepper You´re welcome my friend. Regards !
Very helpful for the beginner. Thank you Ninja!
+Mahros Darsin You're welcome my friend, Regards
+CFD.NINJA ANSYS
Do you have video tutorial hoe to make a spring (spiral)?
Thank you
+Mahros Darsin I will try in the future. Regards
thank you very much.so useful
Thank for this video!
You're welcome friend
Best regards
awesome
pl add video of making wedge shape modelling in a rectangular duct ( 1500*200*25) top side and all other 3 side insulated in 2d or 3d both
Hi my friend; Do you have a image? write me in this group: facebook.com/groups/667845339978600/
Regards
Like, excelent music!
Sir please (Ansys Fluent) add a 1 complete video of Helical coil (tube in tube) heat exchanger to find all fluid properties like Reynolds number (Re), Nusselt number (Nu) to draw a graph 1. pressure drop vs Re
2. heat transfer coefficients vs Re
3.heat transfer coefficients Vs Diameter at different Re
4.Nu vs Re
5. Tube Specification
a) Copper tube Outer dia. 25mm inner dia 23mm (Outer Tube)
b) Steel-316 tube Dia 6mm (Inner Tube)
c) Length 3.5 m before coiling
d) number of turn 5
e) Re varies 350 to 6500
Hi, CFD Ninja! Would it be possible for you to help me put HINGES on my geometry, using the Hydrodynamic diffraction and time response analysis systems? Thank you for the videos! They are very helpful!
Thanks!
Thanks 😀
Hello,
nice video;) helpful for beginners like me!
if possible, I would like to ask you two questions:
- is it possible to make a 3d sweep? I mean the curve for the sweep can be not only in one plane but be included in two planes? (I am trying to draw an handlebar for bicycle and I am figuring out how to make the dropped part: I think I could try to use a 3d spept if possible, or use a loft with different sections, or sweep the horizontal part and then revolve a section(but this way will be not nice I think))
- which program do you use for the videos?
Fabio
+Fabio Malizia hi my friend; Design modeler use 2d sweep; but there may be other tools to build your model, Do you have some image?
Regards
+CFD.NINJA ANSYS
At the end I used 1 extrude for the handlebar, and two sweep for the junction and the dropped part (for the last part I could also use the revolve function).
Maybe it could be done better but for the moment is ok... now I hope I can manage to make the meshXD
If you have any suggestion are really welcomed;) thanks a lot for all your videos!
Fabio
I tried to attach the pictures but did not work:(
+Fabio Malizia ivanrips@cfd.ninja
Regards
thanks brother
You're welcome friend.
Best regards
very good tnq sir,
could u plz allocate some time for explaining the results
Hi friend, Thanks,
What results?
Regards
plz help!!if i want to offset x axis 4 degrees in a new plane ,what i should write in FD,value?i write tan4 ,but is not accepted
Hi my friend; in that case, you should complete the number, for example, tan4 = 0.06992, DesignModeler recognize the numeric value. Regards
ty a lot..gj in this video ,u really helped me..
You're welcome. Regards
Hi, Thanks for the Tutorial...But, How do I draw a Pipe having an ACME threaded profile helically cut on the Outer Surface throughout its length? If possible, please make a Tutorial... ThanQ...
Hi my friend, Do you have any image?
Regards
Hi, Thanks for the reply...I have the image...But how do I share it with u now ?
Hi, please send me to ivanrips@cfd.ninja
Regards
Sir please help. Whenever I open new geometry it shows error " The geometry was closed abnormally". Please reply sir.
Hi my friend,
Can be several things, maybe the license or maybe there is no compatibility of your hardware with ANSYS. Regards
Which version of ansys is this one? mine is 17.2 and the interface is way different D:
Hi my friend, Are you sure? I think that is the same, please send me your interface to ivanrips@cfd.ninja, I will like see it. This is version 16.0. Regards
CFD.NINJA ANSYS thank you so much for the answer ! Right now I'm sending you a picture of my interface !
Adrian Crespo Hi my friend the interface that you send me is Spaceclaim that is other software in this video the software is Desing Modeler. Ansys has both
You can choose. Regards
Hi Adrian;
Please watch this video about Design Modeler and Spaceclaim
ruclips.net/video/t7EP56BvrJM/видео.html
Regards
Can you help me please
I need the desin of tubulare heat exchager " fisceaux et calandre"
hi sir i want to draw the 2-d aneurysms .how to draw pls help out
+jaydeep chandra Sahu hi my friend; Do you have the dimensions? Regards
I want to conduct cfd analysis of c-d, conical and bell nozzle can you help me
Hi my friend;
Here a tutorial about CD Nozzle:
cfd.ninja/ansys-cfx/convergent-divergent-cd-nozzle/
for conical an bell nozzle you can follow the same steps.
Regards
sir,
can u help me on how to make 3 pipe t joint?
+Muhammad Jalaluddin hi my friend; Do you have some picture or image?, Regards
+CFD.NINJA ANSYS Great video sir! I was struggling with Ansys. Thank you so much!
ANSYS SpaceClaim
ruclips.net/video/u7X-4tkXaBA/видео.html
can we import geometry from google sketchup? Pls ans asap, thanks.
Hi my friend;
Can you send me your Sketchup file?
ivanrips@cfd.ninja
Regards
CFD.NINJA ANSYS i don't have one actually i am planning to design a fuel cell's geometric design on that
Hy my friend,
Sketchup build the geometry using surfaces and ANSYS need solid, Directly isn't possible I recommend use Inventor, Solidworks, SpaceClaim or Catia.
Regards
what does "always close the geometry" mean?
Hi friend;
That refers to the creation of lines before generating the solid, if those 2D figures are not closed, you cannot extrude them or create a 3D solid.
Regards
How can I change the dimesions? it is fixed for me why?
Hi friend, you can change units in workbench. Regards
DM sucks! God bless Spaceclaim!!!
Well; DM is good, Spaceclaim too, very soon Spaceclaim tutorials. Regards
Yeah, and your DM tutorials videos are very useful. I learned in your videos how to imprint and project bodies... but last year i tried spaceclaim and since then i never returned to DM because it's very easy to use and fast. it can almost do whatever you want without bothering you with features
Hi my friend; Well Spaceclaim is a powerfull software, for this reason now ANSYS has DM and Spaceclaim.
I hope that in the future Spaceclaim will develop parameterization with programming (VBnet or other) to reach the level of Autodesk Inventor. However, the license cost of spaceclaim versus DM has to be assessed. Regards
Start SpaceClaim
ruclips.net/video/u7X-4tkXaBA/видео.html
Vaut mère la
Jx's