I was concerned my 5'5 wife would be to small but when you said your 4'10 daughter was able to get full range of motion, that made me happy. Its already in the mail and on its way. Excellent review!!
I don’t think so. Unfortunately I can’t verify right now because it is currently inaccessible. It is crammed into the back of room behind tons of boxes, equipment, etc…while I remodel my basement.
As a Rep affiliate myself, that was not my intention. I was speaking in general. Whenever you get paid a “Paid Promotion fee” by ANY company, you should be open about it and not call it a “review.” If you get the equipment for free, you should also admit that, too - but You could still call it a “review.” If you will make commission money as an affiliate, you should be admit that too, but you could still call it a “review.” Just my opinion.
@@DesignBuildLift yeah I agree. Just saying there's a lot of rep shill out there in big channels and they tend to not review good value products like this. Glad to see a good review of this model it is definitely tempting once I move. Looks like one can get full rom without having to use a lot of creativity which is nice
I, personally would rather have weight horns on top and additional on bottom. Higher up is more accessible for us older guys. Did you mention the type of bearings? Finally the pads look like junk…nothing personal but you get what you pay for when buying budget equipment. Also as far as saving space with weights loading underneath I would disagree because the footprint is what takes up space and if weights were loaded above they would still be within the footprint of the leg press. Loading weights standing up is so much easier than squatting down trying to reach under with a 45 plate or more. Thanks for the video
Good question. I just tried that and it didn’t work for me. But There is currently an $80 coupon that pops up for me on amazon (limited time only). I would price out both options. Please let me know what was the cheapest option for you. Thank you so much for your support! 🤘🙏💪
Your referring to full ROM as you get nowhere near full depth on your squat. You need to add a pad or box if your 6ft to get full depth on this machine. Same for the leg press, maybe your 5ft daughter can get it, but I'm order to get down deep enough without bottoming out you need a pad or something in your back to allow you to get deeper
Fact that you said the back pad is "good quality thickness" you already lost me 😅 I've seen tons of reviews and that thing looks thin and flimsy as well. Why do you think they nearly doubled it on their new version that's a few hundred bucks more 😅 that and add the ability to go deeper and give you more space for your legs since anyone with a success 10 shoe and above can barely fit their feet on the press
It’s been a while - so I rewatched this. I specifically only mention the back pad and the seat pad. My exact words were (regarding those pads): “it’s nice and dense…okay…good quality here.” I stand by that statement. I think that the padding is good…for the price tag. I have had it for almost a year and it has held up nicely. This one model is $799 (before discount ls applied). It’s their more compact cheaper model. The quality reflects the price tag. The newer model is $1359. It’s bigger and beefier..and much more expensive. Therefore, they now have one model for the space/price conscious people, and one for the people who are willing to pay a bit more/have more space. For the more expensive model - of course I would expect even better padding. As the price climbs I expect the quality to also increase. This same thinking extends to the larger footplate for the new model. But just because they are releasing a higher-end model doesn’t mean than the budget-friendly option now sucks. Different options, for different consumers. The bottom line is: Is this model worth the price tag? My answer is yes. 🤘
I was concerned my 5'5 wife would be to small but when you said your 4'10 daughter was able to get full range of motion, that made me happy. Its already in the mail and on its way. Excellent review!!
Awesome! As long as she adjusts both foot plates she will be good to go! 🤘
So tempted to get this for my basement gym.
Trying to budget an equipment overhaul.
Go for it! It’s a great value for sure. 💪
The hairbrush microphone got me to subscribe immediately
Ha! Works every time! 😆
Nice overview and looks like your video worked as they are sold out now.
Dang! I just checked again. They fixed the issue! Back in stock now.
Awesome, takes up less space than I was thinking too, can't wait for it to get here..... Whenever that is 😅
You will love it!
Do the weight horns accommodate standard plates (1” hole) or just Olympic style plates?
Oly plate sleeves can be removed to accommodate 1” plates. 🤘
Thanks
This looks good. My physiotherapist has a horizontal leg press that also does hack squat I think. But I am sure they are super expensive machines.
I have seen those. They look crazy expensive and take up a ton of room.
Did yours have band pegs? It seems like either some do and some don't or some are just at bad angles where you can't see them
I don’t think so. Unfortunately I can’t verify right now because it is currently inaccessible. It is crammed into the back of room behind tons of boxes, equipment, etc…while I remodel my basement.
Great video, very helpful and informative! 👍🏻👍🏻
Thank you so much, Aubrey! I appreciate it!!!! 🤘🙏💪
Nice work.....🎉wooooow
Thank you, Brother!!! 🤘🙏💪
How many inches long are the loading horns?
Each one has about 11.25” of length to add plates.
@@DesignBuildLift Thank you.
Love the call-out on Rep affiliates
As a Rep affiliate myself, that was not my intention. I was speaking in general. Whenever you get paid a “Paid Promotion fee” by ANY company, you should be open about it and not call it a “review.” If you get the equipment for free, you should also admit that, too - but You could still call it a “review.” If you will make commission money as an affiliate, you should be admit that too, but you could still call it a “review.” Just my opinion.
@@DesignBuildLift yeah I agree. Just saying there's a lot of rep shill out there in big channels and they tend to not review good value products like this.
Glad to see a good review of this model it is definitely tempting once I move. Looks like one can get full rom without having to use a lot of creativity which is nice
I mean, REP and Rogue both make good shit...REP actually has some decently priced items.@@hashslasher2973
I, personally would rather have weight horns on top and additional on bottom. Higher up is more accessible for us older guys. Did you mention the type of bearings? Finally the pads look like junk…nothing personal but you get what you pay for when buying budget equipment. Also as far as saving space with weights loading underneath I would disagree because the footprint is what takes up space and if weights were loaded above they would still be within the footprint of the leg press. Loading weights standing up is so much easier than squatting down trying to reach under with a 45 plate or more. Thanks for the video
I definitely agree that loading plates on top is easier. So its a tradeoff between having smaller footprint vs ease of loading.
Vielen Dank für den Upload
Danke sehr mein Freund!
@@DesignBuildLift bitteschön 😊
Does promo work on Amazon link?
Good question. I just tried that and it didn’t work for me. But There is currently an $80 coupon that pops up for me on amazon (limited time only). I would price out both options. Please let me know what was the cheapest option for you. Thank you so much for your support! 🤘🙏💪
@@DesignBuildLift thanks for solid review. I was worried about not having a full length motion when doing leg press.
5:40 all I needed to see, this won't work for real lifter
Please elaborate
Your referring to full ROM as you get nowhere near full depth on your squat. You need to add a pad or box if your 6ft to get full depth on this machine. Same for the leg press, maybe your 5ft daughter can get it, but I'm order to get down deep enough without bottoming out you need a pad or something in your back to allow you to get deeper
Fact that you said the back pad is "good quality thickness" you already lost me 😅 I've seen tons of reviews and that thing looks thin and flimsy as well. Why do you think they nearly doubled it on their new version that's a few hundred bucks more 😅 that and add the ability to go deeper and give you more space for your legs since anyone with a success 10 shoe and above can barely fit their feet on the press
It’s been a while - so I rewatched this. I specifically only mention the back pad and the seat pad. My exact words were (regarding those pads): “it’s nice and dense…okay…good quality here.” I stand by that statement. I think that the padding is good…for the price tag. I have had it for almost a year and it has held up nicely.
This one model is $799 (before discount ls applied). It’s their more compact cheaper model. The quality reflects the price tag. The newer model is $1359. It’s bigger and beefier..and much more expensive. Therefore, they now have one model for the space/price conscious people, and one for the people who are willing to pay a bit more/have more space. For the more expensive model - of course I would expect even better padding. As the price climbs I expect the quality to also increase. This same thinking extends to the larger footplate for the new model.
But just because they are releasing a higher-end model doesn’t mean than the budget-friendly option now sucks. Different options, for different consumers.
The bottom line is: Is this model worth the price tag? My answer is yes. 🤘
Damn is everyone talking about this machine on here lol
It’s the talk of the town! 🤘