Saved in my favorites under the name "the aristocrat dog". It reminds me of a conductor in a proper auditorium (forum) walking down the main aisle on his way to the pavilion to lead a beethoven concerto...or a gentleman who has just stepped out of his luxurious chariot...similarly the dog with its tail raised seems to say to the wind: please "don't touch me"...lol
Great video big Dog. I need HELP PLEASE. I have a Sharp Aquos LC-60-C6400U that will not power up and has code 2 long 3 short. I've looked hard for the code meaning on YT and Google with no luck. The tv first started loosing the picture from time to time. cold or warm. The sound worked fine. I tried the heating the processor with light pressure to prevent movement. Then it would not not come on with only the code flashing. I have tried all the reset procedures I could find but no change. I also changed the power board with results the same. Fuses on both boards are good. ANOTHER PROBLEM is I can't find a diagram that shows the pin numbers location at connector on power board and leads to the main board. Only pin with power is 5V on what I presume to be pin 15 (BU5V). Many thanks for any help.
Excelente vídeo profesor lo felicito,tengo un tv sharp aquos 40" quiero baja corriente de leds ya sea manualmente o por menú de servicio pero no se como hacerlo me podría ayudarme se lo agradecería mucho ,saludos de México.
You really had a tough one there big dog that’s why I don’t work on tvs other than the company I work for..because between the cost of the strips and my time it’s not worth it..
Thats what I thought too, until I looked at the old strips and they were all cracked up just from me taking them off. Same cheap quality, but the old one's lasted almost 8 years lol.
Im done with backlight fixin uf u live round me i will give u a lot of business if it aint the main or the power supply i tell the customer buy another tv to much work lol
Hey big dog my sister gave me a lc70le733u backlights never come even when I try the reset procedure if I hold chd vol up an plug in the logo led are solid still no backlight checked voltages I've got 64 volts on l1 on the led driver board but nothing on l2 I'm a tv tech of 40 years experience an have fixed tvs with backlight strips failure before but normally you get a flash or light then off it goes !! Any help is appreciated want to fix for my man cave thought maybe led driver board is bad thx Ed
Thank you for emphasising the importance of replacing the panel back properly
Thanks man. You saved me some big money with this video. Thanks for what you do.
I'm impressed that was some delicate work you did to save that set.
Lucky recovery there Marc well done
Never had strips crack but worth keeping an eye out thanks
Awesome save! Good job BigDog. Thanks for sharing.
I actually like that the Sharp set wont boot with blown leds. The samsungs do and eventually cause the rear lens to melt and crack.
Haha I love the sound effects. Nice work!
I had to laugh out loud when I saw the pair of dogs in the description. Thank you for making my day. Otherwise good repair job. Greetings from Mexico.
Saved in my favorites under the name "the aristocrat dog". It reminds me of a conductor in a proper auditorium (forum) walking down the main aisle on his way to the pavilion to lead a beethoven concerto...or a gentleman who has just stepped out of his luxurious chariot...similarly the dog with its tail raised seems to say to the wind: please "don't touch me"...lol
Good work sir
yay bigdog does it again
So I had the slow blink and fast blink..replaced the leds on an 80” Sharp..now I get two blinks and 5 fast blinks…power supply?
try the factory reset
@soundbasics were you able to fix?
Great video big Dog. I need HELP PLEASE. I have a Sharp Aquos LC-60-C6400U that will not power up and has code 2 long 3 short. I've looked hard for the code meaning on YT and Google with no luck. The tv first started loosing the picture from time to time. cold or warm. The sound worked fine. I tried the heating the processor with light pressure to prevent movement. Then it would not not come on with only the code flashing. I have tried all the reset procedures I could find but no change. I also changed the power board with results the same. Fuses on both boards are good. ANOTHER PROBLEM is I can't find a diagram that shows the pin numbers location at connector on power board and leads to the main board. Only pin with power is 5V on what I presume to be pin 15 (BU5V). Many thanks for any help.
Excelente vídeo profesor lo felicito,tengo un tv sharp aquos 40" quiero baja corriente de leds ya sea manualmente o por menú de servicio pero no se como hacerlo me podría ayudarme se lo agradecería mucho ,saludos de México.
Love it
You really had a tough one there big dog that’s why I don’t work on tvs other than the company I work for..because between the cost of the strips and my time it’s not worth it..
Compared to working on Cars. This is much better lol.
Super tech thanks
So are the newer led strips of lesser quality?
Nice repair!
Thats what I thought too, until I looked at the old strips and they were all cracked up just from me taking them off. Same cheap quality, but the old one's lasted almost 8 years lol.
very nice work u are the best
Thank you! Cheers!
Thank you
You're welcome
Only strips on the top?? Gets it done.
what did you do to that panel strip to get it back working? thank you
I re-soldered the connector on the Driver board.
Looks set for the next 5+ YEARS.
Part information please?
Google part and model#
Trying to do same repair on model no. Lc 60e69u took a hit during construction can’t find parts can u point me in a direction
Ebay, Google, amazon, TV parts Guy, Shopjimmy.com, etc.
Im done with backlight fixin uf u live round me i will give u a lot of business if it aint the main or the power supply i tell the customer buy another tv to much work lol
Pain in the butt. Different from the other strips.
Would never buy one of those..
Hey big dog my sister gave me a lc70le733u backlights never come even when I try the reset procedure if I hold chd vol up an plug in the logo led are solid still no backlight checked voltages I've got 64 volts on l1 on the led driver board but nothing on l2 I'm a tv tech of 40 years experience an have fixed tvs with backlight strips failure before but normally you get a flash or light then off it goes !! Any help is appreciated want to fix for my man cave thought maybe led driver board is bad thx Ed