A clinician faces these kind of cases frequently. Very useful & informative tips ... explained in a very understanding manner. Thank you for the knowledge 👏🏼👏🏼👏🏼👍🏼. God bless you 🙌🏼
I'm an Endodontist. I'm amazed by your confidence and deep rooted knowledge in this field. Should you carry out any one to one courses on microscope kindly intimate. Regards from Chennai.
Well, that's a tricky situation. I had seen a video by @yoshiterauchi where he had removed an extruded gp with an xp shaper. I still have to try the same.
@@jajaabsin9057 Chloroform 2-3 drops into the canal .....Wait 4 -5 mins the gutta perture will be softened and much easier to remove with a Rotary and or a Hedstrum hand file ....GO SLOW and Irrigate with copious NaOCL
Sir, which Endomotor should I use where rpm speed can be increased upto 1000 rpm ? Because sir my Endomotor's maximum rpm( Coltene company) is 500rpm. Sir, one more request which scaler i can use for these ultrasonic tips?. Sir please i am eagerly waiting for your reply.
Hello sir. How to remove the sealer which is hardened which is extruding out of the apex .no matter how much I precurve the file and try to remove the sealer of GP left in apical third extruding out of apex ..it's not coming out .. it eventually led to transportation of canal apical opening .how to deal such canal.kindly guide
Sir am undergoing re RCT treatment, there is a little gutta percha remaining at the end, doc tried all possible ways but couldn't remove. Would it be harmful for me? Any dentists please help me with answers 🙏
hey! dentist here. are you getting crown? if you are then the remaining gutta percha is meant to be there as they should add post and core to the tooth
Sir can u enlightened me about ultrasonic file, i use this file but frequently it break . I have bonart p6 scaler c file holder & i set in lowest frequency without water but breaks every time😔 . Suggest me where i am wrong . I see u r using rc removal file . Which company u recommend. Eg densply retreatment fie or mani or endostar or neo endo . Pls guide me
Can I use this retreatment files for removal of 2/3 root canal filled with gutta percha for post space prep or they can pull all the gutta percha from the root canal and make the endodontic fail ?
is the rotary rereament file go to the full working length or we should use it till middle third and apical third removed by xp finisher and manual files ? as the rotary at apical third may break or cause ledge. what do u think dr
Sir,u told oil based anything interfere with bonding,than can we use metapex in large periapical abscess cases.i want to discuss a case with u .how can we send u Xray sir?
I have retreatment files from dentsply ,but gp is always like a concrete to remove,coronal 3d will comes out ,but after that was never able to remove.plz guide
Dr. I just started my practice 4 months back and I hang in one case the teeth have pariapical radiolucency and it's been treated rct 10 years back so I decide to do re-rct but gp stuck in apical third portion and it's not retrieving even by bmp how can I get rid of this
Regenerative endodontic treatment can be done on mature permanent root canal treated teeth. If yes then in your known reference can suggest a endodontics clinic or hospital name for doing this treatment please reply me as soon as possible. I am from ratnagiri, Maharashtra And I want to do this treatment And one more thing is that my root canal is just started and roots are not removed still. And my roots are good in condition. It was an a condition where accidentally my root canal treatment is started. You can do this treatment
Hi sir In case of removing gp in 11 with H files without using solvents - I accidentally pushed the gp beyond the apex And i am unable to remove that part of gp which went beyond the apex The patient complaints of tenderness to percussion Is there any way to remove gp which went beyond apex sir Please share your valuable opinion sir
ledges are a common occurrence in root canals. a simple thing to follow is that never force a file in case you get stuck. if your file is advancing analyse the situation and work accordingly
any kind of flare up is due to over instrumentation. try to take the working length multiple times while removing gp so that you do not extrude anything
I used twice(two cases) new, out of the box fkg xp finisher 1000rpm and it broke, does it happen to you or how frequent? How many times do you use the xp finisher? What can I change to avoid breaking xp endo finisher. Thanks for your tips! Great video. Greetings from Poland :)
there are some things that you need to live with. I tooth have a small clinic and I don't have space to keep the compressor outside. over a period of time I have got used to the noise
Contact for Endosonic and RE endo files-9833832685
Contact for XP Shaper- 9884433000
which company manufacture and sell Endosonic files, RE endo files & XP shaper?
Do you have an e-mail we can contact you on?Would appreciate that.
From South Africa/Botswana
@@drashwinsambasivan7823 drniranjanvatkar@gmail.com
What r the precautions to remove the root canal tooth?
A clinician faces these kind of cases frequently. Very useful & informative tips ... explained in a very understanding manner. Thank you for the knowledge 👏🏼👏🏼👏🏼👍🏼. God bless you 🙌🏼
Glad it was helpful!
I'm an Endodontist. I'm amazed by your confidence and deep rooted knowledge in this field. Should you carry out any one to one courses on microscope kindly intimate. Regards from Chennai.
Thank you
Superb video Niranjan very very clearly explained. It was a great help. Thanks a ton🙏
My pleasure 😊
Thanks for sharing sir
Now will try your suggestive technique
Always welcome
Excellent and very valuable video ,thanks so much
Very useful tips.....really essential to know..thank you..
Welcome 😊
Thank you Sir for sharing this. This is very helpful. Love the explanation. Thank you again m
Very well explained. Thanks Doc
Thank you sir for this tips ... I am budding Endodontist... This will help me for sure😃
Good job dr , but I wonder how did you manage the obturation process after that kind of ledge and curve ?
Very informative and helpful.
Glad it was helpful!
Very informative 👏, thank you.
Thank you sir for explaning it in most simple way
You are most welcome
Very informative lecture
Thank u very much
Thank you Dr.Niranjan for sharing ..simple and easy way .God bless you!!
My pleasure
Sir how are you....this is Dr Amar from MA RangoonWala Op dept.... nice to see you after such a long time
very nicely explained
Hi Sir. Nice tip and explained clearly. I like to know how to remove gp if its extruded in the periapical region without periapical surgery. ANY TIP?
Well, that's a tricky situation. I had seen a video by @yoshiterauchi where he had removed an extruded gp with an xp shaper. I still have to try the same.
Sir how to prevent extrusion of Gutta purcha while removing if it occurs
Gentle watch winding motion with a delicate k or h file will help. Also irrigate well !
What dissolving agent do you use?@@bitesizeduniversity
@@jajaabsin9057 Chloroform 2-3 drops into the canal .....Wait 4 -5 mins the gutta perture will be softened and much easier to remove with a Rotary and or a Hedstrum hand file ....GO SLOW and Irrigate with copious NaOCL
Very informative. Dr kindly share from where we can get endosonic files , re endo files and fkg do shaper. Thanks
Contact for Endosonic and RE endo files-9833832685
Contact for XP Shaper- 9884433000
@@niranjanvatkar1820 thank u doc saab
Hello Sir. Great video!
Which ultrasonic system and tips do you use?
Endostar
Thank you very much sir
Awesome
doc.
Excellent work
Sir, which Endomotor should I use where rpm speed can be increased upto 1000 rpm ? Because sir my Endomotor's maximum rpm( Coltene company) is 500rpm.
Sir, one more request which scaler i can use for these ultrasonic tips?.
Sir please i am eagerly waiting for your reply.
change the endo motor, buy satelec P5 machine for ultasonics
Very well explained Bro .. 👏👏
🤝
Always please mention that which handpiece do you use for endosonic files? slow, fast or endomotor hand piece?
the endosonic file is attached to your ultrasnoic handpiece
Hello sir. How to remove the sealer which is hardened which is extruding out of the apex .no matter how much I precurve the file and try to remove the sealer of GP left in apical third extruding out of apex ..it's not coming out .. it eventually led to transportation of canal apical opening .how to deal such canal.kindly guide
Follow the protocol as shown in the video. You will never have an trouble while removing GP
Doctor i am seing a new endodontist for a re root canal that got infection, is it safe, i am scared
don't worry. it will be fine
Sir am undergoing re RCT treatment, there is a little gutta percha remaining at the end, doc tried all possible ways but couldn't remove. Would it be harmful for me? Any dentists please help me with answers 🙏
hey! dentist here. are you getting crown? if you are then the remaining gutta percha is meant to be there as they should add post and core to the tooth
Sir can u enlightened me about ultrasonic file, i use this file but frequently it break . I have bonart p6 scaler c file holder & i set in lowest frequency without water but breaks every time😔 . Suggest me where i am wrong .
I see u r using rc removal file . Which company u recommend. Eg densply retreatment fie or mani or endostar or neo endo .
Pls guide me
Gaurav the frequency is very less. Increase the frequency.
Contact for Endosonic and RE endo files-9833832685
Contact for XP Shaper- 9884433000
@@niranjanvatkar1820 sir how much should increase speed / frequency sir . Guide me
you have judge it yourself. See at what frequency the GP gets softened. try on an extracted tooth
Excellent video 👍👍👍
Thank you 👍
Very nice sir
Very helpful, thank you
Glad it was helpful!
Nice an informnative where we get xp shaper sir
Contact for Endosonic and RE endo files-9833832685
Contact for XP Shaper- 9884433000
Nice video dear
Can I use this retreatment files for removal of 2/3 root canal filled with gutta percha for post space prep or they can pull all the gutta percha from the root canal and make the endodontic fail ?
for post space preparation I would recommend you use peeso drills
is the rotary rereament file go to the full working length or we should use it till middle third and apical third removed by xp finisher and manual files ? as the rotary at apical third may break or cause ledge. what do u think dr
go as per explained in the video
Sir if we want to try xp file for a routine root canal treatment what xp file should be buy? Xp shaper or xp finisher to start with?
Buy shaper only. Finisher is fragile
Niranjan Vatkar great video sir ! Thank you so much for the help
Good video sir
Sir which Rvg do u use...as image is too clear
carestream (kodak)
Sir,u told oil based anything interfere with bonding,than can we use metapex in large periapical abscess cases.i want to discuss a case with u .how can we send u Xray sir?
drniranjanvatkar@gmail.com
Can we use ultrasonic activator instead of sonic files.which microscope is used here. And size of xp endoshaper to buy
What activator are you mentioning? I have Carl Zeiss. Do shaper comes in on size only
I have retreatment files from dentsply ,but gp is always like a concrete to remove,coronal 3d will comes out ,but after that was never able to remove.plz guide
Follow the above protocol
Thank you sir
Dr. I just started my practice 4 months back and I hang in one case the teeth have pariapical radiolucency and it's been treated rct 10 years back so I decide to do re-rct but gp stuck in apical third portion and it's not retrieving even by bmp how can I get rid of this
What did you do with that case doc
use the endosonic tip under magnification
sir please share the details of dealer where we can procure the endodontic file and reshaped files
Contact for Endosonic and RE endo files-9833832685
Contact for XP Shaper- 9884433000
What is other possible alternative to endosonic files?
none
How to remove gp beyond apex???
XP finisher
Regenerative endodontic treatment can be done on mature permanent root canal treated teeth.
If yes then in your known reference can suggest a endodontics clinic or hospital name for doing this treatment please reply me as soon as possible.
I am from ratnagiri, Maharashtra
And I want to do this treatment
And one more thing is that my root canal is just started and roots are not removed still. And my roots are good in condition.
It was an a condition where accidentally my root canal treatment is started.
You can do this treatment
What you are asking can only be assessed after a dentist checks it. Kindly visit any dentist for proper treatment
Which brand retreatment files have been shown in the video?
Endostar from Poland
Hi sir
In case of removing gp in 11 with H files without using solvents - I accidentally pushed the gp beyond the apex
And i am unable to remove that part of gp which went beyond the apex
The patient complaints of tenderness to percussion
Is there any way to remove gp which went beyond apex sir
Please share your valuable opinion sir
Same thing happened with me ..
How did you curve the endosonic file ? By wat method ?
fingers
Sir....
How to remove gp from apical third
is there any chance we can remove with broch files sir?
yes. it needs microscope and ultrasonics
How to avoid ledge formation during retreatment cases sir?
ledges are a common occurrence in root canals. a simple thing to follow is that never force a file in case you get stuck. if your file is advancing analyse the situation and work accordingly
Sir in 25 gp extended in periapical region 7-8 mm.. pt having no pain.should I wait or remove gp.plz rply
Removal is better. Try the surgical approach
@@niranjanvatkar1820 ty sir
@@niranjanvatkar1820 is there only surgical approach no other method for this??
which company manufacture and sell Endosonic files, RE endo files & XP shaper? I'm not sure who their dealer in Philippines.
Endosonic and rendo files are manufactured by Poldent (Endostar). its a Poland company.
XP shaper is manufactured by FKG
Do you remove only the GP from the canal that get infected or you remove all the GP from every canal?
Yes. I do selective retreatment for few cases where i treat only the infected root canal.
So are gutta percha solvents risky ?
Yes. Since we are dealing with bonding for most of the procedures, having a residue will compromise the strength
@@niranjanvatkar1820 thank you Doctor
Superb
Sir do you encounter flare up after removal of gp and how can we avoid it ?
any kind of flare up is due to over instrumentation. try to take the working length multiple times while removing gp so that you do not extrude anything
Thanks sir
After removing gp with your method, are we suppose to do BMP subsequently or the BMP is not required and we have to do obturation directly?
Cleaning nd shaping you have to do...as their is failure of obturation
I used twice(two cases) new, out of the box fkg xp finisher 1000rpm and it broke, does it happen to you or how frequent? How many times do you use the xp finisher? What can I change to avoid breaking xp endo finisher. Thanks for your tips! Great video.
Greetings from Poland :)
What were your settings?
Torque?
I use it at least for 3 times until I throw
@@niranjanvatkar1820 torque at 1
Try keeping on 1.8
Re rct is done(its been 2 months )....I feel pain on pressing the tooth ...what do I need to do?
Visit your dentist
Extraction
Check the occlusion and the get ct scan
@@athulboseklol no ct? 😂
roots infected, it's better to extract the tooth before the infection leaks into blood stream.
Indian realworldendo
Thank you. Still a long way go
Which selar u use
Ahplus/Syntax
How to manage compressor noise ..dont have space to keep outside
there are some things that you need to live with. I tooth have a small clinic and I don't have space to keep the compressor outside. over a period of time I have got used to the noise
Sir aap hindi me b smjha skte g
Salam alaykum doc !