My son has one and beat the hell out of it and it just keeps trucking along. One additional thing I would replace (whether it needs it or now) is the oil cooler on the RH side. they are known to crack and dump oil into the coolant passages. They are a bugger to replace when the turbo is installed. Cheap part and cheap insurance and totally accessible with the turbo & surrounding junk off.
I have an 06 crd. Needs a new high-pressure fuel injection pump and radiator. I may as well do all the parts replacement like lifters, rocker arms, water pump, timing belt, pulleys, turbo, and clean the EGR system. Are you interested in doing the work?
Walter tengo una 2006 con el power steering pump bracket roto, el resto en perfecta condiciones ya fui a buscarlo DIVEMOTOR no lo tienen sabes si alguien en Lima esta desmantelando alguna CRD. Soy Juan Woll vivo en la Molina.
I have one with piston #4 problems with noises. Hope the engine isnt blown... probably is. Such a pain. It drove for a while in limp mode, for a while anyway in low gear 4wd low. Seriously though, what does one do with such a car? It has high miles.
THANK YOU for this video , i recently bought crd with a bad engine and also got a junk yard motor that will go in the jeep. new parts include water pump, lifters , thermostat, and an ebay turbo(dont know about this one, looks good on the outside) ) any suggestions ? thanks
Hi Cristian Sorescu, I’m Juan Woll from Peru, I have two months looking for the BRACKET which hold the power steering pump and the serpentine belt tensioner, and the bracket join to the engine block through three bolts on Jeep Liberty KJ 2.8L CRD. Already I know that you have two engines, Please would you sell me one BRACKET by ebay and through video comments notice me before the BRACKET sell on ebay to avoid someone buy it first. Maybe you have other way to sell me the BRACKET let me know. For the power steering pump and the serpentine belt we'll coordinate later. Many Many Thanks for your help.
Old Iron garage some days ago vía your instagram I requested your help about sell me the power steering pump bracket from the CRD worn out engine that you have there. In my country Perú here there not junkyard here to pull out parts and additional the peruvian customs forbidden used part to come in. is you help me I'll pay vía ebay or the way you prefer and send Miami address through your Instagram.
Thank you! I am about to buy one @ 93k. Excellent video!!
My son has one and beat the hell out of it and it just keeps trucking along. One additional thing I would replace (whether it needs it or now) is the oil cooler on the RH side. they are known to crack and dump oil into the coolant passages. They are a bugger to replace when the turbo is installed. Cheap part and cheap insurance and totally accessible with the turbo & surrounding junk off.
Thank you for the video. Just bought a 06 CRD
I have an 06 crd. Needs a new high-pressure fuel injection pump and radiator. I may as well do all the parts replacement like lifters, rocker arms, water pump, timing belt, pulleys, turbo, and clean the EGR system. Are you interested in doing the work?
Buen video amigo. Tengo una. Igual CRD 2.8 2005 saludos desde PERÚ
Walter tengo una 2006 con el power steering pump bracket roto, el resto en perfecta condiciones ya fui a buscarlo DIVEMOTOR no lo tienen sabes si alguien en Lima esta desmantelando alguna CRD. Soy Juan Woll vivo en la Molina.
I want one of these so bad
I have one with piston #4 problems with noises. Hope the engine isnt blown... probably is. Such a pain. It drove for a while in limp mode, for a while anyway in low gear 4wd low. Seriously though, what does one do with such a car? It has high miles.
How do you remove the crankshaft of this engine
Gotta question your head bolt removal. There is a sequence of front to back and left to right to keep from warping the head. Just asking
THANK YOU for this video , i recently bought crd with a bad engine and also got a junk yard motor that will go in the jeep. new parts include water pump, lifters , thermostat, and an ebay turbo(dont know about this one, looks good on the outside) ) any suggestions ? thanks
Only suggestion would be to get an install manual! It helps a lot with the pulling of the motor out of the jeep as well. Best of luck!
Hi Cristian Sorescu, I’m Juan Woll from Peru, I have two months looking for the BRACKET which hold the power steering pump and the serpentine belt tensioner, and the bracket join to the engine block through three bolts on Jeep Liberty KJ 2.8L CRD. Already I know that you have two engines, Please would you sell me one BRACKET by ebay and through video comments notice me before the BRACKET sell on ebay to avoid someone buy it first. Maybe you have other way to sell me the BRACKET let me know. For the power steering pump and the serpentine belt we'll coordinate later. Many Many Thanks for your help.
Liked and subscribed, cool. What happened to the original CRD?
2.500 cc ??
I’m getting ready to tear into an 06. Do you have to lock the injection pump in place so that it doesn’t get out of time?
You will have to realign it before you install the new timing belt. Not hard at all
Will this engine replace a 3.7 L gas engine in a 2012 Liberty?
No. The CRD uses a different transmission, as I recall. Also, the CRD was available on Gen-1 vehicles. 2012 is a Gen-2.
NEVER keep the egr system it kills these unique motors
Fornicate the EPA
100%
Old Iron garage some days ago vía your instagram I requested your help about sell me the power steering pump bracket from the CRD worn out engine that you have there. In my country Perú here there not junkyard here to pull out parts and additional the peruvian customs forbidden used part to come in. is you help me I'll pay vía ebay or the way you prefer and send Miami address through your Instagram.