JBL Pulse 2 Charger Port Replacement Not Charging Micro USB
HTML-код
- Опубликовано: 24 авг 2024
- Buy a charger port 👉 [ bit.ly/2IB84X1 ]
Steps to Repair Your JBL Pulse 2 Charger Port:
1. Use hot air to remove the charger port
2. Remove all factory solder from the anchor holes and connector pads using solder wick
(Tip: Mix leaded solder with the factory solder to absorb easier. Use flux!!!)
3. Place your new port onto the PCB making sure that the pins are laying flat on the pads
4. Secure the port by soldering the anchor legs
5. Solder the connector pins to their pads (Make sure that there are no bridged pins)
6. Use a Q-tip with alcohol to clean up any remaining flux
Feel free to reach out to our radical animal friendly support team with any questions your brain has developed during the watching or pre gaming of this video:
www.JoesGE.com 📲
Support@JoesGE.com 📩
360.362.1722 📞 (Text or Call)
If you are tired of pre gaming or talking with our radical animal friendly support team, and find yourself pondering the meaning of electronics as a whole, you can ponder them deeper by checking us out on these platforms for social-ish activity:
- Snapchat @joesge
- Instagram @joesge
- Facebook @joesge
-
JoesGE.com is a pretty cool place (depending who you talk to it might be more than pretty cool. But hey, I'm just writing this down so that it says something down here, because that's more professional right?) and if you're still reading along at this point you might as well sit down and grab some popcorn because this is about to trail on about how we are this premiere repair service located in Washington State North of Seattle in basically the "Armpit of the US" near Mt baker (Mt Baker has the world record for most snowfall at 1,140 inches in a season). Even though it can smell bad around here we love the fresh air and being near the post office and in a quiet sleepy mountain town certainly gives us much closer access to Team Turtle and Team Beaver (Watch our "Who, what, when and where is JoesGE?" video if you don't get the reference).
All this to basically say that we are all addicted to coffee and stay in the warehouse for ridiculously long hours in order to keep up with the demands of the youth for these two sided head audio devices and speakers that float when you throw them in the ocean or in your bathtub to test if they actually float. On top of that we do like it when less stuff ends up in landfills so we hoard everything on shelves with wheels so that we pollute less, it just sits in our warehouse loosing molecules slowly over time degrading to become smaller and smaller.
If you are still reading at this point you deserve an award, or a high five, or something because you must either be the most patient person on the planet, or you read blogs frequently. And if the latter is the case, then this whole thing must seem pretty short so lets keep going.
We do some really interesting things here at JoesGE which are frequently documented in our sometimes weekly sometimes never vlogs.
Also, if you are wondering how we keep up with the demands of the people so well, its because 90% of the people that work here are all Russian around getting things done most of the time. Yes, that was a pun, you are welcome. We hope you have a pun filled day, because who couldn't use a few laughs?
I would give you money to repair my jbl pulse 2!
hello I know I'm 2 years late but I found my speaker lying around and I thought I might tackle it. because of the aggressive shoving of the micro USB to get it to charge I also damaged the port itself. is it as simple as taking it apart and changing out the port or no? thanks in advance!
Are you still repairing these? Can the port be changed from micro USB to m USB - c ? Have you looked into battery replacement or upgrading mah ? Just curious thanks for the video
Hello, unfortunately, we do not repair this device anymore. We do sell the parts at www.joesge.com though. - Aaron P
Hey, can you still repair these? Mine won’t charge and it’s getting really annoying
We do still repair them. www.joesge.com/pages/repair-service-speakers-jbl
Mine won’t either 😩 it’s sucks these speakers don’t last
Did it worked?
It did for us:)
I tried your website but... did not work. Are you stil lin the business to replace the micro-usb charging connector for Pulse 2? thanks!
Thanks for the comment. Our website was experiencing problems but have since been resolved.
Here is a link to the repair form: www.joesge.com/pages/repair-service
-David P
Can you repair mine if I send it to you? I would be happy to pay you to fix it 😀
Yes you can send it in, and we can repair it! www.joesge.com/pages/repair-jbl-speakers
No way in hell am I gonna pay $70+ for a charging problem, you guys are crazy. The damn speaker cost $200!!!
JBL pulse 2 costs $100 or less
Great video , tons of help. Thanks!
I know it is kinda off topic but does anyone know of a good website to stream new series online ?
@Isaac Cesar Try flixzone. You can find it on google =)
@David Dustin Yea, I have been watching on flixzone for since april myself :)
@David Dustin thanks, signed up and it seems like a nice service :) I appreciate it!!
@David Dustin thank you, I signed up and it seems like they got a lot of movies there :) Appreciate it!
Can you give me a rough estimate on what you think it might cost someone who doesn't have any tools? No solder, iron, flux, etc. I get that there are variables in the prices I'm just looking for an idea of how much I need. Thanks.
Thanks for watching! The cost would totally depend on which soldering iron that you buy etc. We sell the charge port alone for $7 so you would need to price out the tools and such. If this is the only time you plan on using the soldering iron and such then it may not be worth it. Hakko makes great soldering products that are intended for long term heavy usage so they are more expensive. We use Hakko gear and love it :) Matt D.
Hi, it doesn't matter if the battery is plugged while replacing the micro usb
We recommend the battery is not plugged in. This way there is not short if you create a bridge between points and your tools. - Joe
What temperature you used to desolder ?
Thanks for the comment. We normally have our solder machine set to 850 degrees Fahrenheit.
-David P
@@Joesge thanks i used a temperature near that number and got fixed 2 JBL pulse by now :D
Glad we can help:)
Whats the cost to replace charge port?
Hello, unfortunately, we do not repair this device anymore. We do sell the parts at www.joesge.com though. - Aaron P
Component name please. Thanks
USB Charger port.
Do you send parts to europe
That is a great question, and yes, we do send parts and products all over the world, including Europe! CH