Tech Series EP. 6 (IS300 Boost controller installation!) MAC valve

Поделиться
HTML-код
  • Опубликовано: 30 окт 2024
  • MAC valve:
    www.amazon.com...
    DT connector kit:
    www.amazon.com...
    Fittings:
    You can find whatever fitting set you would like with the filter as well! Just search on eBay or Amazon.
    #cxracing #is300turbo #boosted #boostcontroller #macvalve #emublack #is300 #2jz #lexus
    Join my channel to get access to perks:
    / @knownworldwide
    Please feel free to drop a like, comment on the video and hit that subscribe button! Thanks for watching!
    Please check out my other channel:
    / helpinghandautorepair

Комментарии • 12

  • @Knownworldwide
    @Knownworldwide  10 месяцев назад +3

    WATCH TO THE END! Channel update! 😁

  • @edgarrojas9628
    @edgarrojas9628 10 месяцев назад +2

    🔥video is really helpful and easy to understand, cant wait to get mine

  • @2jz.omarstatic
    @2jz.omarstatic 8 месяцев назад +1

    Great video!!!

    • @Knownworldwide
      @Knownworldwide  8 месяцев назад

      Thanks! Thanks for taking the time to watch the video!

  • @Skyler478
    @Skyler478 4 месяца назад +1

    So just one wire to 12v and the other wire to injector??? Need help got one butt could never install it..😢 scared I might blow up engine with to much boost

    • @Knownworldwide
      @Knownworldwide  4 месяца назад +1

      First off, if you don’t have a stand alone ECU there is no way to control a boost controller like this one.
      If you do have a stand alone ECU then one wire gets switched 12v+ and the other wire needs to get wired to an output (typically they are PWM negative) on whatever stand alone you are running.
      Feel free to ask anything else you may need and thanks for watching! Hope you decide to stick around.

    • @Skyler478
      @Skyler478 4 месяца назад +1

      Yeah I figured...thanks brother

    • @Knownworldwide
      @Knownworldwide  4 месяца назад

      @@Skyler478 of course.

  • @quincycarter6979
    @quincycarter6979 4 месяца назад +1

    Where did you route your bov vacuum line?

    • @Knownworldwide
      @Knownworldwide  4 месяца назад

      It is currently “Tee’d” off of the small port on the intake manifold that is just behind the white looking connector on the very front of the manifold.
      If you need a picture just hit me on IG Knownworld_wide

  • @morganthomas9404
    @morganthomas9404 10 месяцев назад +1

    Is that a 2 port or 3 port boost controller?

    • @Knownworldwide
      @Knownworldwide  10 месяцев назад

      It is a 3-port MAC valve. There is a link in the description below for the one I purchased.