My car wouldn’t start because of this “run flat indicator inoperative”. I did your suggestions reluctantly. For some weird reason it actually worked. Thanks a lot man.
You are a Godsend of info. I have learned so much about my used 2008 Mercedes ML 350 SUV from your excellent videos. Have one question for you on how to get a second backup FOB for my SUV as the dealership here in Victoria, BC Canada told me that Mercedes in Stuttgart, Germany no longer provides programmed FOBs for 2008 SUVs. Do I have any other options to get a back up FOB should I lose my original FOB, which would create a major problem ... NO CAR? Any insight would be greatly appreciated!
my Car keep saying check tire pressure when all my tires are fine and just yesterday I have bought 2 front brand new tyre and the Tyre fitter guy said there is not valve pressure sensor your car is only standard rubber valves But unfortunately my car still saying check tyre tyre pressure run flat indicator thanks for any answer My car is 2014 Mercedes E class
My car tyres are 245/45/R17 From the feul cap It say Front 240 kpa Rear 240 kpa Now each tire is 35 psi =240 kpa just checked from Asda now What do you recommend for me many thanks
I live in Minnesota and own a 2012 ML350 4Matic. I have 2 sets of wheels with tires, all season and winter tire sets. Both have separate TPMS on them. Costco tire center refuses to honor the rotation and wheel balance policy for the winter and summer change although the wheel and tire set was bought from them saying it’s more of a luxury than maintenance when actually it’s the same service that’s done on the tires. I have decided to change the sets myself but should I set the TPMS again for the tire that is installed or once it’s set would the SUV automatically connect each time I install the set? Costco set the TPMS the first time winter change only since I paid for the service when I bought the tires but come next summer I will need to change it myself.
Hi,good video like always,but i have a question,on my ml320 i do it and reset,but than again the message is still on,i run it a coupke of times i chech the pressure in tyres wich is ok but still i get message to run flat...?! Thank.you in advance
A few things could be going on. One of the two floats or both can be faulty, showing inaccurate readings. The float(s) could be tangled up in the wiring inside the tank. These floats live inside the pump which lives inside the tank. It could be a damaged electrical connection. Does the gauge indicate any gas whatsoever? I may do a video on this.
Dear, I was scared seeing red ''Tyre Pressure - Check Tyres'' in my 2006 ML 350. Immediately took to a tyre shop. He filled the air. Later it switched off and on.. and saw a black and white message 'Run Flat Indicator' and gave the 'R' symbol followed by Yew or No. I put Yes. then it said Run Flat Indicator active. Now what should I do? Make it NO or continue driving. When this message will disappear? Many thanks in advance.
It could be a bad sensor in one or more of your wheels. Make sure all your tires are at the correct pressure. You may need to get your car scanned. I have started a diagnostic series. stay tuned for a diagnostic video on how to check these sensors in your wheels. Once you know which one(s) are the problem then a simple replacement will solve the issue.
My car wouldn’t start because of this “run flat indicator inoperative”. I did your suggestions reluctantly. For some weird reason it actually worked. Thanks a lot man.
Thanks so much! The book doesn’t give enough info. You rock.
Thank you so much for this. I've been searching forever trying to figure this one out. Thanks again 👍
Thanks dude, saved me a lot of time searching through the billion page car manual.
+Petros Ioannou glad out helped
Many thanks! spent ages looking at manuals and in 1Minute you sorted the issue 👍
THANK YOU!! Have been wanting to get rid of that notification for weeks now lol
Same lol
Thanks mate this is Milind from Australia.
You are a Godsend of info. I have learned so much about my used 2008 Mercedes ML 350 SUV from your excellent videos. Have one question for you on how to get a second backup FOB for my SUV as the dealership here in Victoria, BC Canada told me that Mercedes in Stuttgart, Germany no longer provides programmed FOBs for 2008 SUVs. Do I have any other options to get a back up FOB should I lose my original FOB, which would create a major problem ... NO CAR? Any insight would be greatly appreciated!
my Car keep saying check tire pressure
when all my tires are fine
and just yesterday I have bought 2 front brand new tyre
and the Tyre fitter guy said there is not valve pressure sensor your car is only standard rubber valves
But unfortunately my car still saying check tyre tyre pressure run flat indicator thanks for any answer
My car is 2014
Mercedes E class
when you say they are fine - what is the actual pressure of each tire?
My car tyres are
245/45/R17
From the feul cap
It say
Front 240 kpa
Rear 240 kpa
Now each tire is 35 psi =240 kpa just checked from Asda now
What do you recommend for me many thanks
Thanks for the help! Much appreciated
Thanks a lot! Your tips are super helpful!!!So Sick of all the check this, check that codes this thing throws! No more Mercedes vehicles for me:)
I watched a similar video earlier today - it was in Hindi, thanks for your version.
I live in Minnesota and own a 2012 ML350 4Matic. I have 2 sets of wheels with tires, all season and winter tire sets. Both have separate TPMS on them. Costco tire center refuses to honor the rotation and wheel balance policy for the winter and summer change although the wheel and tire set was bought from them saying it’s more of a luxury than maintenance when actually it’s the same service that’s done on the tires. I have decided to change the sets myself but should I set the TPMS again for the tire that is installed or once it’s set would the SUV automatically connect each time I install the set? Costco set the TPMS the first time winter change only since I paid for the service when I bought the tires but come next summer I will need to change it myself.
Thanks 🙏🏾 one a few videos I’ve ever watched and it works 😂
Worked perfect on my 2009 CLK 550
Third problem solved by you 👍🏻top man
Thanks so much had that flashing up for ages x
Very helpful vid - many thanks!
Cheers bro had the same issue on my ml63. Keep being awesome!
+Urbanfire123 Thanks for the positive feedback.
Thanks ! Worked like a charm. Much appreciated.
Hi,good video like always,but i have a question,on my ml320 i do it and reset,but than again the message is still on,i run it a coupke of times i chech the pressure in tyres wich is ok but still i get message to run flat...?! Thank.you in advance
Thank you very much for the help
Thanks Buddy! Very helpfull!
Very Helpful, Thanks alot
Thanks. You solved it for me
Glad it worked for you!
A bit confusing...why change to miles . when car comes with Kms. ?
mine doesnt have this menu..w164 2007
Thanks. Helped me
Skip to 1:30 Works on the newer shape model too! Thank you
Hola amigo te hago una pregunta cuanta es la presión en cada neumatico? saludos desde colombia
pls tell me a trick to reset service alert in the menu.my mech forgot to reset it
Why is my fuel guage mor working?(mb ml 350 4matic).How do I fix it?
A few things could be going on. One of the two floats or both can be faulty, showing inaccurate readings. The float(s) could be tangled up in the wiring inside the tank. These floats live inside the pump which lives inside the tank. It could be a damaged electrical connection. Does the gauge indicate any gas whatsoever? I may do a video on this.
@@iRepairAutos There is no indication whatsoever. It's down all the time where there is fuel in the tank or not.Pls I need more info on this.
@@vtopsnigltd6108 i created this video just for you ruclips.net/video/bMnjHJ-l48g/видео.html
Thanks buddy 👍
Thank you so much
Dear, I was scared seeing red ''Tyre Pressure - Check Tyres'' in my 2006 ML 350. Immediately took to a tyre shop. He filled the air. Later it switched off and on.. and saw a black and white message 'Run Flat Indicator' and gave the 'R' symbol followed by Yew or No. I put Yes. then it said Run Flat Indicator active. Now what should I do? Make it NO or continue driving. When this message will disappear? Many thanks in advance.
If your vehicle has run flats I would set it to yes. Does it have run flats?
Thank u sir 😊
Thank you
THANK YOU!!!
i have the same message does it mean i have a flat??
Not necessarily. It means that one or more of your tires are low in pressure.
I did all of this and the light will not turn off?
It could be a bad sensor in one or more of your wheels. Make sure all your tires are at the correct pressure. You may need to get your car scanned. I have started a diagnostic series. stay tuned for a diagnostic video on how to check these sensors in your wheels. Once you know which one(s) are the problem then a simple replacement will solve the issue.
It Works On A UK c220 2011 Model
On the C220 it Turns Off ABS Till you Reset It
hey bro how can I reset my tire pressure on my 2007 ml 350 Mercedes Benz can you please help me with that? thanks
It should be 99%-100% the same as on a 2006 ml 350. Are you finding it to be different?
Got it bro thanks
iRepair Autos Dfffgg
Thanks dude!!!
Thank you!
Thanks
FRATERNAL FRIENDS OF FRANCE.
+Pierre Lesaignoux my brother!
Thank's
Thumb up.
Thank you
Thanks
Thanks sir
thank you