I bought one. Shipped to US. Took me a couple tries to adjust the bullet placement and now makes wonderful bends in 6061 T6 Al for my Searey Seaplane. Couldn't be happier. -Ken. Tampa, Fl.
I must say, is a very nice well fabricated machine. I have a Huth bender from 1994 and now this MK5 is another excelent complement...from 6 to 74MM two very good pieces of enginnery...Congratulations David (sorry my poor English)
In theory, it could, however it depends how hot you heat the steel. The former it is bending around is aluminium, which has a much lower melting point than the steel. Also, it would be quite awkward and fiddly to put the hot steel in the clamp etc. The only heating we normally recommend is annealing aluminium.
@@usefultoolsukI used light heat on SS sheets that i formed, such as arches or many round shapes, and it reduced spring back almost 90%, which made it easier to from. I didnt know if this would apply to tube and forming.
As a matter of interest, is there a best place to position the stainless tubes welded join? My guess is on the inside of the bend, or perhaps it doesn’t actually matter much.
Yes we can. Please send an email to david@useful-tools.co.uk with a drawing/sketch and more information about your requirements and we'll get you sorted out.
firstly, don't pluralize using apostrophes. Secondly, if you'd just spent a minimal amount of time observing the description or surfing the comments then you'd have answered your own question. Thirdly, it's 700 bucks plus ~$150-230 per pipe size tooling set, plus shipping.
Hi, We have nearly finished a hydraulic motor version of the bender for extra tough bends/ Please contact us if you are interested in this bender (or one of our other models): E: david@useful-tools.co.uk or T: +44 (0)7774 642407 Thanks
How do you know it is 180 degrees, are there a degree markers, or is it just 'close enough'? Oh please, next time don't video in the middle of the motorway, lousy background music.
I bought one. Shipped to US. Took me a couple tries to adjust the bullet placement and now makes wonderful bends in 6061 T6 Al for my Searey Seaplane. Couldn't be happier. -Ken. Tampa, Fl.
I must say, is a very nice well fabricated machine. I have a Huth bender from 1994 and now this MK5 is another excelent complement...from 6 to 74MM two very good pieces of enginnery...Congratulations David (sorry my poor English)
راتن
one of the reliable auto parts supplier of off road vehicles
Is this tool available for purchase in the USA? If so, what is the price?
Hi and thanks for your interest.
Yes, we ship all over the world.
Check out our website or contact us on the details in the description above.
Would heating the tube assist in bending the tube easier?
In theory, it could, however it depends how hot you heat the steel. The former it is bending around is aluminium, which has a much lower melting point than the steel. Also, it would be quite awkward and fiddly to put the hot steel in the clamp etc.
The only heating we normally recommend is annealing aluminium.
@@usefultoolsukI used light heat on SS sheets that i formed, such as arches or many round shapes, and it reduced spring back almost 90%, which made it easier to from.
I didnt know if this would apply to tube and forming.
a great tool. one every minor critique, consider using the same size capscrew for the clamp mounting and gripping actions
Nesesito una de 1.1/4 .16.o.2mm cuál es suprecio$
After bending how much the pipe starches.... I want to bend cold roll pipe 22mm OD and 2 mm thickness...and 25 mm OD 2 mm thickness..cold roll pipe
This is nothing but outstanding! Convincing product 💪
nice machine sir, can we bend 1" 18-gauge CR pipe 40 MM CLR on it?
Possibly is the best answer I can give to that.
Email us (see above) and I'll get back to you on that.
As a matter of interest, is there a best place to position the stainless tubes welded join?
My guess is on the inside of the bend, or perhaps it doesn’t actually matter much.
Usual rule of thumb is on the neutral position: top or bottom relative to the plane of bending
cheat comes at 3:25 when he keeps his thump on a bent section to cover the deformation, later he skillfully swaps the element for another....
good bender but is very expensive & needs to include a wiper die that would fix the rippling
It just happen to be on that particle bend. I have this bender and it does a remarkable job and very little deformation as he says.
Can you do this in 1/2 inch in several 180 bends say in a 12 to 16 foot long piece of stainless?
Yes we can. Please send an email to david@useful-tools.co.uk with a drawing/sketch and more information about your requirements and we'll get you sorted out.
where can I buy this product?.
I'm from indonesia.
We manufacture and ship direct from the UK. Contact us using the details above and we'll help you out. Thanks.
where would i purchase one from ? dose anyone have a link
See our website at: useful-tools.co.uk
Cómo me encanta este modelo en particular, no me canso de verlo!!(
where can i buy ur tube bender
shop.useful-tools.co.uk/mandrel-tube-bender-2-p.asp or call on +44 (0)7774 642407 or email: david@useful-tools.co.uk
How did you make the bender?
I would like to see a version of this marvelous tool with the capacity of bending two inch diameter steel tubing with a .045 thick wall.
Is there any problem in bending 18 swg stainless steel pipe
What is the value of the machine for Brazil and if it curves stainless steel?
Morning. Please send your e mail address and I will reply in detail.
Best regards
David Lazenby
david@useful-tools.co.uk
I need 1 1/4 pipe tube bander same like this where I car get?? Plz answer fast i need it urgent
Available in India how much price
We manufacture and ship direct from the UK. Contact us using the details above and we'll help you out. Thanks.
Where can I buy your tubing bender?
www.stakesys.co.uk/tube-pipe-benders/mandrel-tube-benders/mk5-mandrel-tube-bender
Nice tube bender. Please make a video which also shows bending of square aluminum tubing !
Thank you. We plan to do a video of square tube bending in the near future. We can already bend square steel box section.
Hi what name this product?
how many price?
Visit our website: www.useful-tools.co.uk which has all the information you require.
el telefono gue aparese
no puedo ablar meiteresoen una cual
es su precio contesteme
gracias
how much is that in us dollar's
firstly, don't pluralize using apostrophes.
Secondly, if you'd just spent a minimal amount of time observing the description or surfing the comments then you'd have answered your own question.
Thirdly, it's 700 bucks plus ~$150-230 per pipe size tooling set, plus shipping.
Justin Crediblename TOP
dont be a twat @@JustinCrediblename
جميل جدن كم قيمته
Thank you. Please contact us on the details above and we'll discuss price and your requirements.
Price
I need this machine uae
i like this and might get one someday
Thanks,for sharing video,very good result.
excellent work
Ka number kya hai aapse baat kaise
Very goog.thank.🙏🏻🌺🌱
Pretty slick.
it does not work very slow
Excellent work
má lắp cho nó cái bánh răng mô tơ cho nhanh đi hjhj
Hi,
We have nearly finished a hydraulic motor version of the bender for extra tough bends/ Please contact us if you are interested in this bender (or one of our other models):
E: david@useful-tools.co.uk or
T: +44 (0)7774 642407
Thanks
स्टील बेंडिंग इलेक्ट्रॉनिक मोटर
We are currently designing a version of this bender powered by an electric motor. If this is of interest, please contact us: david@useful-tools.co.uk
Adam Right
Good information
El precio lociento
Noes crivo ingles pero ciloablo iloentiendo ci medan
Una idea sobrel
Precio
very nice .
I am satisfied.
good
How do you know it is 180 degrees, are there a degree markers, or is it just 'close enough'? Oh please, next time don't video in the middle of the motorway, lousy background music.
Hi
Good
👌
ดูแล้วหน้าจะดัดง้ายกว่าตัวอื่น
Impressive!
Woodomain - Jeremy Broun no usefully web site (useful-tools.com.uk)
Praij
Cuál es su orecio
Please contact us (see above) for latest pricing and details.
Thanks
@@usefultoolsuk I need a tubing vender 1 1/4 inches. 16 gauge. What total price?
The Beste !
like
Fooooooor
Byn
Idia not good
ল
💪😂
Vedeyi