WOW!Easy to do with sick results.Thank you so much for your tutorials on how to airbrush our rc bodies and quick tips.Its people like you who help us newbies.Keep up the great work and thank you.I really appreciate your help and your skills.
That’s awesome dude 👌 didn’t now I would be that easy to airbrush carbon fiber. Thanks a lot for that tutorial. I started airbrushing rc bodies about a year a go. And was looking on getting a little more creative than just 2 colors. That carbon fiber look will definitely bring some more creativity to my work.
I have one of your custom painted bodies, and I love it. You did this effect on the entire bed of the truck. I almost hate to cut it to fit the head of my nitro engine. The Only complaint i have is that i cannot bring myself to actually run my truck when it has that body on it😂. You do amazing work man.
Amazing effects that you get by simply using Shelving "Grip Liner".........VERY good tutorial. I THINK you might have heard this before, but ...........you've got skills buddy !!!!!
So you were painting on a rectangle plastic piece. So if I want to do it on my car am I just doing exactly what you did but to the inside of the RC car?
This is fine for flat areas. How do you do this around the curves in a lexan body? How do you get the drawer liner to form around the inside? I have not been able to figure out a way to get it to form around curves without it just popping back up.
Are you using the same black for the base and lines as well as the backer? If so which black? I have wicked black, jet black ans candy black. Thanks in advance
Amazing work. Thank you so much. So I have an airbrush setup with a Badger 105 that I used for plastic models and want to get it back out to paint RC bodies, what paint should I start with. Like could you recommend a set to start with? Like a few paint colors? I want to do skulls and flames with your stencils
I got discouraged on painting I tried to paint a body using spastics paints the colors are gold green orange and purple backing with black and what happened was it came out purple and turns into metallic green but shows no gold no orange when this happened I got discouraged
Hello friend, excellent your technique, consultation will be the same Tamiya spray, on the other hand the mesh you use to imitate carbon, where you got it, greetings from Argentina
So I wanna do a slash body with this should I just use one large peice of the drawer liner an cover the whole inside in one shot or move a smaller peice around an do it in sections?
i have done everything under the sun i paint rc bodies for a living. The link for the white carbon fiber is my facebook page gallery. Just take a look around.
DriftCraze 2 I apologize if I'm talking to you through two different phones one works on Wi-Fi the other one has connection sorry I am also Driftcraze2
I'm trying to achieve a chrome blue with spray cans is it possible I was thinking maybe a blue translucent back with some fast chrome paint is this possible
Question, I'm trying to do a blue carbon fiber paint job. Is it possible to lay down your candy blue, then your silver squares, and then back it with a flat blue or florescent blue, or does it have to be backed by black?
when doing carbon fiber you can get creative Nasim. Candy blue then silver squares works. And as long as your backing color is darker it will work. You can play around with it for different results yes!
Amigo that is freaken awesome!!! Not only very well done but you’ve explained really well too. I have one question and would also like to ask for your advice. Q: what are you spraying on? Is it a form of sticker that you will later stick to the inside of a lexan body? A: Please give me some tips on equipment. Must haves both in tools and sizes and quality and brand names for air brush gun. Help me out please. I love the work you’ve done. Gonna search more of your videos !!!!
The paper we spray on in this video it just clear plastic we get on a roll at any art supply store. We cut it for our sure it does not stick we trash it when we are done. When we paint bodies the work is painted on the body. We are using Pasche Talons in this video, and a california Air tools compressor. Hope this helps.
Dude this is an awesome video, I paint rc drifted bodies , would this technique work with tamiya PS spray paint cans on the inside of a hard lean body? Cheers
Can you do white carbon fiber is that possible I Like You tutorial good information easier than painting on the outside and then the inside I saw that and another video
works the same way with white. 1st color silver with the mesh, then white done. here is a link of a body i did with white carbon fiber hope it helps. facebook.com/media/set/?set=a.1730535690491422.1073742034.1720512221493769&type=1&l=aa8eb787d7
You can use old soda bottles to practice on. 2 liter bottles work best and are most like RC bodies. It's not Lexan (polycarbonate) but it's very very similar.
Wow! This is the best tutorial I've found on painting carbon fiber. Excellent tutorial sir!
WOW!Easy to do with sick results.Thank you so much for your tutorials on how to airbrush our rc bodies and quick tips.Its people like you who help us newbies.Keep up the great work and thank you.I really appreciate your help and your skills.
ty so much!
Yeah man I concur. Thank you so much man for real.
Oh there are other tut's on this, but this one rocks. You explain it really well, and get the best result I've seen yet.
Thanks bro!
That's awesome. I'm looking at getting back into painting RC bodies after 25 years away from it, and want my cars to look their best
That’s awesome dude 👌 didn’t now I would be that easy to airbrush carbon fiber. Thanks a lot for that tutorial. I started airbrushing rc bodies about a year a go. And was looking on getting a little more creative than just 2 colors. That carbon fiber look will definitely bring some more creativity to my work.
O. M. G. You are an actual god. That looks absolutely amazing. I've been trying to find a way to do this for ages.
lol after reading this i had to go back and look at the video again because i was not sure what i did that qualified me as you described. lol TY!!!
New to painting RC bodies. I think I will do this with a fade on my first body . Awesome info. Thanks for sharing!!!
Awesome!!!!! Very well explained as well. I'm trying to do a unique Red Bull body on my Baja and this just hit it out of the park. Thank you.
I have one of your custom painted bodies, and I love it. You did this effect on the entire bed of the truck. I almost hate to cut it to fit the head of my nitro engine. The Only complaint i have is that i cannot bring myself to actually run my truck when it has that body on it😂. You do amazing work man.
Would this work with spray cans like the Tamiya PS paint? This concept is sick!
Very cool!!!! I'm trying to step up my paint work. Thanks for the video! 🔥🔥🔥
I got a S15 Silvia body that I would like to make metallic Orange or Chrome Orange and add the hood and white carbon if that's possible
That multicolor looks great.
Was skeptical tell I seen the finished product, very cool.
What paint are you using and do you need to use thinner, reducer, or flow improver?
Awsome work ! Well done ! 💙👍🏁
Amazing effects that you get by simply using Shelving "Grip Liner".........VERY good tutorial. I THINK you might have heard this before, but ...........you've got skills buddy !!!!!
The multi color looks phenomenal
Cool trick/technique
Knowing is half the battle
Nice technique bud, thanks for sharing!
So you were painting on a rectangle plastic piece. So if I want to do it on my car am I just doing exactly what you did but to the inside of the RC car?
This is fine for flat areas. How do you do this around the curves in a lexan body? How do you get the drawer liner to form around the inside? I have not been able to figure out a way to get it to form around curves without it just popping back up.
takes practice and sometimes you have to cut on a slant to bend the liner in place. I do it all the time.
Thanks !!! It helps a lot watching your videos!!
Whoa, that was amazing and I’m going to try it, thanks!!!
Great video and technique! Thank's for sharing.
Wow love it gives me inspiration. Thanks!! #Bob Ross of rc car bodies!
This is amazing, thanks for the tutorial!
stay tuned for more...
WOW😲!!! GREAT BREAKDOWN 👌 TUTORIAL.
YOU HAVE A NEW SUBSCRIBER.
Thanks for sharing your knowledge 👍👍
Are you using the same black for the base and lines as well as the backer? If so which black? I have wicked black, jet black ans candy black. Thanks in advance
Amazing work. Thank you so much. So I have an airbrush setup with a Badger 105 that I used for plastic models and want to get it back out to paint RC bodies, what paint should I start with. Like could you recommend a set to start with? Like a few paint colors? I want to do skulls and flames with your stencils
wicked color set, spax stix set, i also use some other Createx paints as well.
You think this would work with Pearl paint too? Or does it have to be candy for the silvers and colors?
Great tutorial thanks
Really beatify work. What paint do you use on polycarbonate bodies?
I got discouraged on painting I tried to paint a body using spastics paints the colors are gold green orange and purple backing with black and what happened was it came out purple and turns into metallic green but shows no gold no orange when this happened I got discouraged
Awesome video. Can this be done with spray cans the same way.
Wow 🤩. Ihr seid klasse. Gute Idee und macht etwas anderes. Super 👍☺️
Hello friend, excellent your technique, consultation will be the same Tamiya spray, on the other hand the mesh you use to imitate carbon, where you got it, greetings from Argentina
What's good brother I'm about to paint an rc body will this work the same with spray paint in a can
excellent love it! been wanting a new effect of my bodies. Thanks for the video. abosolutely subscribed.
straight up awesome
never saw anything like this before, great stuff... near the end of the vid you're referring to "aramids" perhaps?
So I wanna do a slash body with this should I just use one large peice of the drawer liner an cover the whole inside in one shot or move a smaller peice around an do it in sections?
What type clear plastic is that your painting on please
graft dura-lar .003 thickness clear . I buy it by the roll 20" x 50'
I'm also looking to do a military fatigue beige light brown dark brown on the car have you tried anything like that
i have done everything under the sun i paint rc bodies for a living. The link for the white carbon fiber is my facebook page gallery. Just take a look around.
SKIN JOBS I'm going to take a look at your page which means I gotta create a Facebook page cuz I don't have one
DriftCraze 2 I apologize if I'm talking to you through two different phones one works on Wi-Fi the other one has connection sorry I am also Driftcraze2
Amazing work..i got an question. im interesting in airbrushing. but i dont know wat size air compressor to get. wat do i need to get started
you don't need a big compressor, there are a lot of start up kits out there.
I'm trying to achieve a chrome blue with spray cans is it possible I was thinking maybe a blue translucent back with some fast chrome paint is this possible
that should work
What is the name of that plastic material did you used? It that decals? Thanks!
Is it simple to do carbon fiber with flames what material would I need to do flames
Thank you for the great video what would be a good beginner airbrush kit ?
What black did you use? Is it black lacquer or gloss black?
What kind of mash has been used for this effect?
Thanks a lot for the video and the explanation 👍
So good and so easy, can’t wait to try, thanks!
What kind of paint did you use
Is that translucent colors
Super impressive work!
You have skills , thanks for the great tutorial ,well done.
Have you ever painted carbon fiber with a color changing paint?
Exactly what I was thinking about. Ps47 backed with the layer of silver just before backing with black should look amazing imo
What brand and number the candy paints are you using? Thanks
What’s the best way to remove paint from my body
holy crap, fantastic technique
Question, I'm trying to do a blue carbon fiber paint job. Is it possible to lay down your candy blue, then your silver squares, and then back it with a flat blue or florescent blue, or does it have to be backed by black?
when doing carbon fiber you can get creative Nasim. Candy blue then silver squares works. And as long as your backing color is darker it will work. You can play around with it for different results yes!
Where do I get that mat you used to create a pattern? Really interested!!!
any dollar store or walmart will have it. Its called a kitchen draw liner.
So would it be best to paint the RC from the outside using your amazing technique? Looks incredible dude.
where buy this stencil? measures? Thanks!
Looks real good but the scale is a bit off for like a 1/10 scale would definitely have to be smaller
Amigo that is freaken awesome!!! Not only very well done but you’ve explained really well too. I have one question and would also like to ask for your advice. Q: what are you spraying on? Is it a form of sticker that you will later stick to the inside of a lexan body? A: Please give me some tips on equipment. Must haves both in tools and sizes and quality and brand names for air brush gun. Help me out please. I love the work you’ve done. Gonna search more of your videos !!!!
The paper we spray on in this video it just clear plastic we get on a roll at any art supply store. We cut it for our sure it does not stick we trash it when we are done. When we paint bodies the work is painted on the body. We are using Pasche Talons in this video, and a california Air tools compressor. Hope this helps.
SKIN JOBS Thanks for the info amigo. I join the group on FB as well as your page. Hope to learn lots as I am a virgin at this for now lol
Is this possible to do with a rattle can?
If you take your time it can be done!
What is that stencil / mat you use?
What would you recommend to spray through if I shan’t that effect on a 1:8 scale model car. Not RC
What type of colour are you using brother?
Great Video! Thanks for the tips!
Outstanding!
Great video and tips
Dude this is an awesome video, I paint rc drifted bodies , would this technique work with tamiya PS spray paint cans on the inside of a hard lean body?
Cheers
i don't see why not.
Wonderful work ill save this video
Beautiful work 💪
How cool !! Thank you for inspiring me
Nice one Craig!
Thanks for sharing such a pro tip.
Can you do white carbon fiber is that possible I Like You tutorial good information easier than painting on the outside and then the inside I saw that and another video
works the same way with white. 1st color silver with the mesh, then white done. here is a link of a body i did with white carbon fiber hope it helps. facebook.com/media/set/?set=a.1730535690491422.1073742034.1720512221493769&type=1&l=aa8eb787d7
Great video, thank you
I've been doing rattle can job's on my cars, but would really like to start air brushing. Any recommendations on the type I should get
Badger 105 best bang for the buck.
where did you get those pieces of lexan. I want some inexpensive thin sheets for practice
Andy Mc Fly me to! I’m trying to find a place to get thin sheets like this to practice simple things
You can use old soda bottles to practice on. 2 liter bottles work best and are most like RC bodies. It's not Lexan (polycarbonate) but it's very very similar.
That’s amazing! Thanks for sharing!!
Beautiful....true art!
You have clean work
thanks!
SKIN JOBS this is what I did with plastic net
drive.google.com/file/d/1MDLb9AsnxQlkiFS_-mvaMABDPCeM--kU/view?usp=drivesdk
Well done! Thanks you for the info.
Very impressive 👍😃
Great info man👍
amazing job. awesome
Thanx
Nice vid bro! Just sub'd! Love your technique.
smart! well done.
wow, amazing result
Sweet mate looks good
this is so relaxing, I'm sleepy now
Bob Ross' cousin... Has to be...
Amazing 👏👏👏👏👏👏👏👏
GREAT! very thanks!
that was pretty cool
This video keeps on giving 🎉🎉🎉
That looks DOPE!!!!....