@@HamTechRadioScannerDrones but freq sorting woukd be my only requirements for any software, I. Like to put in manually then use software to then sort in this case might have 4 or 5 banks for airband each bank to sort in freq order, though it's not vital, wish there were more memories, 10p per bank just not enough, the dynamic banks were good for this sort I radio as sone 12 is enough, others say Duxford 25, general air band I Need 400, but mikaird 1500, so 1000 channels is limiting
@@HamTechRadioScannerDrones Just downloaded the uniden software Presume I can add ctcss, dcs, cc, ran to any memory channel with the freq not just it searching for it
As said can't get working drivers so software no good manually added 100 vhf air and some local pmr toned and dmr, plus 60 active mil uhf and vhf, set up several new searches
Pleased with reception in a few minutes after added 459.225 cc2 came up I know it waited or jeswins or similar but so far last few months still not fully identified
Ok getting nowhere with new laptop I'm downloading the updater but I then can't see it anywhere on the laptop, after I've opened it and installed it, can't say this windiws is very good preferred Windows 7 much easier
@@HamTechRadioScannerDrones think I brought a crap laptop says windiws 11, but why won't it update virus Microsoft since 2020, same with any other updates it just won't update, sound is hard to hear full volume as well, so it's not worth wasting my time on, ilmtry and find someone whole update my radio for me when I want it done, use another's pc or laptop hopefully, crazy thing is even windiws 11 is way too complicated that 7 and not user friendly at all
If i can't even open the firmware updater, as nothing on laptop to show it's there no icon anywhere, then ss won't open as needs an app which they don't have on windows
@@HamTechRadioScannerDrones got the bc vup working updated firmware ok, but the as program software and sentinel keep saying needs app to work the checks app store can't find anything and that's it, not installs, thix windows 11 is crazy At least I know i can update firmware but this isn't a very user friendly system, give me earlier windows any day and support for 160dn should of been for earlier windows not just 10 or 11
Ok tried and found that page with links ok but on ss program tell me to download an app on Windows store, then tells me there isn't one Then on bc vup says repair or uninstall, so I click repair, as nothing saying install, it then says it's installed yet can't find I t anyway on laptop Too difficult, just have yo accept wasted money on this laptop and, can't update firmware ever, programming much easier by hand
@@mpol701 now on my old l laptop software all. Loads just doesn't work or connect to radio but I can see the soft ware on my desk top, this on this laptop won't it's probably the lap top it won't even update fully, keeps saying last security update in 2020 which this bring brand new I'm pissed off, can't use this I have no use for it now
Won't run sentinel either says about something net dk or similar download that and it still won't recognise when I open or try to sentinel, I've run sentinel and other uniden software plus various arc butel for various radio no issues like this, this laptop is well odd worse 200 quid spent, it won't do what my 15 year old laptop was doing with no issues, resigned to accepting can't use this for anything
![Quando Rondo - Life Goes On [Official Music Video]](http://i.ytimg.com/vi/eIf3fhMXAow/mqdefault.jpg)
Thanks for the great video, Is there any downside to purchasing the US version rather than waiting for the UK version to be released?
I dont think so as the unit is full customisable and with the USA Version u get 220mhz.
@@HamTechRadioScannerDrones thanks!.
the 260dn is not coming to the uk just the 160 from speaking to different retailers
@@dazaboy2k9 radioworld stating it sure is, but near end of the year.
@@darrylyoung1121avera have only stated the 160dn
Even on arc I only manually add freqs and systems, software I only use to sort in freq order each system then save and send to all sds I have
I can manually add systems or freqs quicker than using software
This scanner doesn't use Systems it's just Banks and channels .
@@HamTechRadioScannerDrones but freq sorting woukd be my only requirements for any software, I. Like to put in manually then use software to then sort in this case might have 4 or 5 banks for airband each bank to sort in freq order, though it's not vital, wish there were more memories, 10p per bank just not enough, the dynamic banks were good for this sort I radio as sone 12 is enough, others say Duxford 25, general air band I Need 400, but mikaird 1500, so 1000 channels is limiting
Oh dear radio good but looks like can't use the uniden software as it can't find con port nor will it install a driver
So maybe my older windows won't allow use on this radio irs fine with my sds models
I use arc butel for unidens normally, what is this software? What about sentinel presume it's a differant sentinel software
But for 125vand 160dn more likely to just add manually it's actually easier
There is bearcat software .
@@HamTechRadioScannerDrones Just downloaded the uniden software
Presume I can add ctcss, dcs, cc, ran to any memory channel with the freq not just it searching for it
As said can't get working drivers so software no good manually added 100 vhf air and some local pmr toned and dmr, plus 60 active mil uhf and vhf, set up several new searches
Pleased with reception in a few minutes after added 459.225 cc2 came up I know it waited or jeswins or similar but so far last few months still not fully identified
Can scanners locate encrypted RF signal ?
Needle in a haystack.
@@HamTechRadioScannerDrones i thought scanners have gps buit in ?
Will that software work with the BCT15X?
I will check .
Freescan works with the BCT15X scanner
Ok getting nowhere with new laptop I'm downloading the updater but I then can't see it anywhere on the laptop, after I've opened it and installed it, can't say this windiws is very good preferred Windows 7 much easier
Keep trying
@@HamTechRadioScannerDrones don't have ability overloaded will chuck laptop on bin
@@HamTechRadioScannerDrones think I brought a crap laptop says windiws 11, but why won't it update virus Microsoft since 2020, same with any other updates it just won't update, sound is hard to hear full volume as well, so it's not worth wasting my time on, ilmtry and find someone whole update my radio for me when I want it done, use another's pc or laptop hopefully, crazy thing is even windiws 11 is way too complicated that 7 and not user friendly at all
If i can't even open the firmware updater, as nothing on laptop to show it's there no icon anywhere, then ss won't open as needs an app which they don't have on windows
@@HamTechRadioScannerDrones got the bc vup working updated firmware ok, but the as program software and sentinel keep saying needs app to work the checks app store can't find anything and that's it, not installs, thix windows 11 is crazy
At least I know i can update firmware but this isn't a very user friendly system, give me earlier windows any day and support for 160dn should of been for earlier windows not just 10 or 11
When i click on download on that link it won't even show anything
Lots learning to do
Ok tried and found that page with links ok but on ss program tell me to download an app on Windows store, then tells me there isn't one
Then on bc vup says repair or uninstall, so I click repair, as nothing saying install, it then says it's installed yet can't find I t anyway on laptop
Too difficult, just have yo accept wasted money on this laptop and, can't update firmware ever, programming much easier by hand
I bet even if I get it on there it won't have the driver and as says this laptop hasn't hit com ports but usb so don't think it will ever work
Firmware update is very simple it's just learning
@@HamTechRadioScannerDrones it just won't load, on software update it says it needs an app to open it, then can't find the app
@@mpol701 now on my old l laptop software all. Loads just doesn't work or connect to radio but I can see the soft ware on my desk top, this on this laptop won't it's probably the lap top it won't even update fully, keeps saying last security update in 2020 which this bring brand new I'm pissed off, can't use this I have no use for it now
Won't run sentinel either says about something net dk or similar download that and it still won't recognise when I open or try to sentinel, I've run sentinel and other uniden software plus various arc butel for various radio no issues like this, this laptop is well odd worse 200 quid spent, it won't do what my 15 year old laptop was doing with no issues, resigned to accepting can't use this for anything
Tone out is not afaik anything for nxdn
It's to do with Firestations
@@HamTechRadioScannerDrones yes pagers type codes in usa