Tektronix TDS600/700 Scope PSU Repair
HTML-код
- Опубликовано: 1 апр 2022
- Your First Order Free at PCBWay: www.pcbway.com/setinvite.aspx...
In this video I repair a Tektronix TDS series oscilloscope power supply.
Link to PCBWay for ordering PCB's:
www.pcbway.com/project/sharep...
Link to gerbers:
drive.google.com/drive/folder... 
Хобби
Another great tut = thanks! You taught me some new things about Low ESR e-caps and why it is important to match their specs exactly.
Fantastic. Thanks for sharing the test board files. I will definitely use it, as I have one of those psu to be fixed.
Let us know how you go! If you install higher wattage, lower value resistors, you could do a higher current load test too.
Professional service and fix, the idea with the testcard is great.
Yes bit he dont see the ripple noise thats why i dont like these cheap multimeters i use dual display multi it show DC and AC
Muito bom trabalho. Parabéns.
rather than touching the legs of the mosfet to discharge the gate when testing with a meter in diode mode, you can just put the +ve lead on the source, and the -ve lead on the gate - that will discharge the gate capacitance and turn the mosfet back off
Awesome 👍👍
Hi mate! thanks for the video! Just a question, where did you get the PSU schematic?
Im struggling for a while to find PSU schematic for TDS380 and 420A.
Gday
That is a huge power supply
Thank you for doing this, always enjoy your videos, I had PCBway do a run of the 1.2 board and ordered the parts from Digikey, it works fine but noticed a difference on your video that the -PF led stays on but on the board I did it only stays on while I depress the momentary switch and goes out when I let go but power on all other outputs stay on like they are supposed to. Any thoughts?
Ive got the newer version without the c17 cap. same symptoms, q5, q6 blown.
I replaced q5,q6, everything else i could find in the chain passed. When I reassembled I momentarily got the green lights for about a second or 2 then the fuse blew again. checking it took out Q5 also.
thoughts? i couldn't find the other tvs diodes and transistors you referred to, waiting for pcbway to deliver the test board. thanks for designing that. seems strange indeed.
what solder extractor are you using, my Pace MBT250 sucks but only metaphorically :)
An awesome video. I have a 744A with no display the VGA on the back works, it's just something in the display unit that not working. Thanks for sharing. Did KO4BB take down the schematics, I can't find them on the website anymore? If so do you have a link to them. Best Wishes & Blessings. Keith Noneya
Check here, the display schematics will be the same across all colour screen models, also the relevant parts of the processor board will be pretty much identical too.
w140.com/tekwiki/wiki/TDS544A
i actually have an tds 644b with 684 board(the original board has been take a shower on capsfluid and drop the magic smoke) i change it his board and the caps in new boar, but still not working (only turn on and off every second) maybe need to check power supply too
Friend, in which electronic store did you buy the Mosfets transistors?
It was either Mouser or Digikey, either or both should have stock.
Where did the schematic for the Tek PS come from? The Service Manual I downloaded didn't have schematics.
Did you ever get a copy or find where you could acquire some?
No. Never did.@@keithnoneya
Hi, when I go on your pcbway shared page, I don't see this power supply board. Can you help direct me to where I can order it. Thanks, Rob
You can find the gerber files linked in the video description....
gate drain source not ground drain source
Good catch!