I'm pretty jealous of your all in one jointer/planer/saw. I can't find anything like that here in the US and it would have been a huge help in my small shop.
None of the wheels turn. Didn’t you see him put multiple screws into each “wheel”? Not to mention, the front edge of the chair is not rounded off. Very sloppy and will cause whoever sits in it to have great discomfort.
Lots of hard work, worthy of a better cause. The final result is crappy. Working on that lathe, with the sleeve so close to the turning belt, gave me chills.
Your some man. I wish I had a quarter of your talent ❤ love from Ireland. That's a class chair. That chair would cost big bucks where I'm from. The detail and the skill is 💯%
Very nyc but how to run by self? Is only for show or run by other person then the chain u hd bin maid it's totally unnecessary, that wheels are enough for the chair
Pour renforcer le tout, je n'aurai pas hésité à mettre de gros tourillons pour augmenter la rigidité de l'assemblage. Un peu de colle et des vis, n'ont jamais fait un assemblage durable. La menuiserie à ses règles...
If it was to be merely decorative, I say...pass. But to be sitting on it, absolutely not. This is sloppy and very badly designed. If I'm going to be spending all this time and effort making this piece, I'm going to make it last a 100 years. The back and sitting area, I would have dadoed into the sides of the support legs. Then bored holes through every slat, so that when I put it together with glue I can put in steel rods every 6 to 8 inches through the entire span of wood slats to give it structural strength beyond just glue, and it would be capped with stainless or brass nuts. The back legs held with just glue. That better be a stronger than wood epoxy, or it gets bolts. Front wheels held with glue and a brad...definitely spells out "Made in China". This is so wrong. As an idea, its imaginative. But the bad quality and sloppy craftsmanshipn I have just witnessed...no way I would claim I did that. The one thing I envy him, is that awesome planer...😍. I looked it up, and its Japanese! That means that it is as good as many German machinery. I never had Japanese equipment; just German. Expensive...you have to almost mortgage your soul. But awesome well built and accurate.
Развлечения
Oh very creative cool ....keep go make creative imperfect
Very unique and creative. I like it. The wood is gorgeous.
My new favorite channel: “Will it roll?”
Love is❤great job
Very impressive! Kepp doing more of this work. I love your talent!
Some HIGHLY DANGEROUS working practices here.
BEGINNERS: D O N O T COPY THIS INDIVIDUAL UNLESS YOU WISH TO INCUR A SERIOUS INJURY!!!
Very nice work, you have a good imagination!
It is amazing.i haven't seen such an artisan till date.i am really astonished to see the good work.hats off
i love these makes but i would realy like to see some colour,
Nice, you should put an engine. 😃
Luar biasa mantap gan 👍
this just kept getting more strange as it went along. I found the first part of the curved wood laminate really neat..modernist.
I'm pretty jealous of your all in one jointer/planer/saw. I can't find anything like that here in the US and it would have been a huge help in my small shop.
Hard childhood,
Wooden toys,
Musculin nurse,
Riding windows :)))
Kiểu ghế đẹp lạ.
Браво мастер.
сделано красиво, но боковое крепление на 3 самореза, весьма сомнительное решение. Если человек 100+ кг сядет на кресло, выдержит ли и как долго.....
That looks so cool!
Muito louco! Sensacional! Super diferente! Gostei! Ubatuba cidade do litoral norte de São Paulo Brasil 2023.
Nuostabus meno kūrinys 👍
Linkiu sėkmės kuriant naujus meno kūrinius.
Linkėjimai iš Lietuvos 🇱🇹
Wow ! Wat ongelooflijk mooi . En al die details zo perfect !!!
Freakin awesome!
That's cool man!
Unique build.
It is fantastic idea!
I am to show it to my Russian friends! :)
Wie cool ist das denn 👍👍Einfach genial und alles nur Holz 😊😊
Thanks you
That Sound 😍
Really cool
Poor job of applying glue. Crappy work.
Good afternoon my friend
WOW!
Шедевр ! Респект мастеру !👍
В этом есть что-то русское :)
кресло игрока в вот.. или тундру :)
только добавить тефлоновую подложку
и продавать!
Tek kelimeyle muhteşem ellerine sağlık
WOW
👍👍👍👍
Suddenly 17:16 a huge timeshift and many screws
I can’t see those front wheels lasting long, looks nice though
None of the wheels turn. Didn’t you see him put multiple screws into each “wheel”? Not to mention, the front edge of the chair is not rounded off. Very sloppy and will cause whoever sits in it to have great discomfort.
Expensive push blocks you’re using there. Irreplaceable!
You need to add some kind of a recliner for your feet
Steampunk, I like it.
Lots of hard work, worthy of a better cause. The final result is crappy.
Working on that lathe, with the sleeve so close to the turning belt, gave me chills.
The wooden tank chair
Squawk a doodle do
Why use wood glue if you’re not going to spread it evenly?
Amateur
Wow!
Looks a bit over-sized, no?
Your some man. I wish I had a quarter of your talent ❤ love from Ireland. That's a class chair. That chair would cost big bucks where I'm from. The detail and the skill is 💯%
Надо было еще сделать, чтоб его можно было катать.
Very nyc but how to run by self?
Is only for show or run by other person then the chain u hd bin maid it's totally unnecessary, that wheels are enough for the chair
Молодец конечно, но пилил очень долго.
So, does it operate?
Pour renforcer le tout, je n'aurai pas hésité à mettre de gros tourillons pour augmenter la rigidité de l'assemblage. Un peu de colle et des vis, n'ont jamais fait un assemblage durable. La menuiserie à ses règles...
Where's the electric motor?
😳😳😳🙄🔥🔥🔥👍👍👍
Спасибо 😊
it's just decoration?
Looks nice but very weak
some very sloppy work here.
Bâclé et laid !
@@elisetaragnat7663😊
Yeah not sure I like it either it’s very weird lol
@@elisetaragnat766325:54
And why was so much time wasted? Glue and screws, you can only look at it!
It's my opinion...
小時候的幻想
Wasted time watching this
Beautiful concept, poor execution
In my workshop you would be fired.
Бессмыслица...
Wasting Wood.😢
Dolboebizm
“LACK OF” Woodworking Technology…poor woodworking techniques and design, poor quality, and very poor safety precautions…what not to do.
If it was to be merely decorative, I say...pass.
But to be sitting on it, absolutely not. This is sloppy and very badly designed. If I'm going to be spending all this time and effort making this piece, I'm going to make it last a 100 years. The back and sitting area, I would have dadoed into the sides of the support legs. Then bored holes through every slat, so that when I put it together with glue I can put in steel rods every 6 to 8 inches through the entire span of wood slats to give it structural strength beyond just glue, and it would be capped with stainless or brass nuts.
The back legs held with just glue. That better be a stronger than wood epoxy, or it gets bolts.
Front wheels held with glue and a brad...definitely spells out "Made in China". This is so wrong. As an idea, its imaginative. But the bad quality and sloppy craftsmanshipn I have just witnessed...no way I would claim I did that. The one thing I envy him, is that awesome planer...😍.
I looked it up, and its Japanese!
That means that it is as good as many German machinery. I never had Japanese equipment; just German. Expensive...you have to almost mortgage your soul. But awesome well built and accurate.
Why?