Any chance to get the stl file to that mount? Awesome design I can pay you through PayPal for your time to design it. Looking to do this instead of using the big lead acid batteries.
using a 5.0Ah ARC Lithium Battery EGO POWER+ 56 Volt ... Will this be okay to run Velocifero scooter ? mine is on the way from the USA .. with the four acid batteries 🙏🧡👊👍
@@alexcoker5816 just the 10 AH Lithium Battery out of stock here in Canada. i can buy a twin pack of the 5AH batteries. Will the 5AH be good enough to run ?
@@alexcoker5816 Hi Alex, just the other day my chain came off my MotoTec Mad 1600W 48V Electric Scooter . if possible could you please tell me what screws i need to loosen to get the chain back on 🙏👊👍
Loosen the back wheel spindle bolt, then tighten the two chain tension adjusters on the back evenly. You'll see the chain starting to tighten, don't over tighten it still needs about 20mm of slack or it'll snap. Make sure the wheel is straight then retighten the spindle bolt. Check the chain it's too tight when you're sitting on the scooter
Sorry I'm not an electronic expert, I put them in my scooter as the batteries were knackered. I expect they would work not sure what range you'll get 🤔
So a 60v lithium battery 🔋 can go in this 1600w unit...? Will it be faster than a 48v lithium instead?
The battery only provides the power it doesn't control the speed
Size of wheel ?
Any chance to get the stl file to that mount? Awesome design I can pay you through PayPal for your time to design it. Looking to do this instead of using the big lead acid batteries.
If you have a look on ebay under ego 56volt there's a guy making them already wired ready to go
using a 5.0Ah ARC Lithium Battery EGO POWER+ 56 Volt ... Will this be okay to run Velocifero scooter ? mine is on the way from the USA .. with the four acid batteries 🙏🧡👊👍
I'd use the batteries it comes with first, ego batteries are expensive
@@alexcoker5816 just the 10 AH Lithium Battery out of stock here in Canada. i can buy a twin pack of the 5AH batteries. Will the 5AH be good enough to run ?
All the ego batteries are the same fittings it's just the run time
@@alexcoker5816 Hi Alex, just the other day my chain came off my MotoTec Mad 1600W 48V Electric Scooter . if possible could you please tell me what screws i need to loosen to get the chain back on 🙏👊👍
Loosen the back wheel spindle bolt, then tighten the two chain tension adjusters on the back evenly. You'll see the chain starting to tighten, don't over tighten it still needs about 20mm of slack or it'll snap. Make sure the wheel is straight then retighten the spindle bolt. Check the chain it's too tight when you're sitting on the scooter
Do you think that battery would work for a 60v 2000w set up?
Sorry I'm not an electronic expert, I put them in my scooter as the batteries were knackered. I expect they would work not sure what range you'll get 🤔
Hello. I wonder how many kilometers the range is?@@alexcoker5816