Install the bmw f10 android 12.3 inch large screen on your BMW 5 Series car
HTML-код
- Опубликовано: 18 апр 2021
- Qualcomm Snapdragon 625 8-core, 12.3-inch large screen, 4G RAM, 64GROM, 1920*720 resolution。
CIC System: www.amazon.com/dp/B091CYVZMP?...
NBT System: www.amazon.com/dp/B091CXX3HL?...
Technical Support：service@pempcar.com
Nice upgrade - we also install these over here in the UK!
Nice Video, However I was told that with this upgrade screen, there is compatibility issue, in the Service History, the previous maintenance done on the car could not be seen or not complete. Is that true? Is there a work around on this issue?
This question is very good!
Because PEMP products only replace the display screen of the original car. All the original information can be displayed on the PEMP Android screen. such as maintenance information. You can learn about it by referring to the following video:
ruclips.net/video/7rA3vvLMZhw/видео.html
Will the navigation prompts appear on the Head Up Display while using CarPlay the same way they do with the factory navigation?
This function is really good，But Sorry,The Android navigation data cannot be displayed on the Head Up Display of the original car.
@@pempcar at least you're honest.
I have CIC. Do I need to route the AUX Cable from the new Android Navi to the original AUX Output of the car or is this not needed as described in the video?
If it is a CIC, there is a 90% chance that you do not need to connect this cable.
Did you fix it, i have no sound
@@pempcarI have F10 2015 NBT will I need to use the AUX cable for audio ?
@@PrimeMercenary 90% chance it won't be needed.
I bought this unit and had it installed in my F10 but the heady unit doesn’t power off at night, did you have this issue?
Please select the correct protocol in the factory settings. If your car is NBT, please select NBT. If it is CIC, please select the CIC protocol in the settings.
If it still cannot be solved, please send the order number to our after-sales service team at service@pempcar.com
Any time I play a video on RUclips I can’t use the zoom in or zoom out. Any suggestions ?
Since the PEMP display resolution is 8:3 and the RUclips video resolution is 16:9, the closest image is matched to the top of the screen.
I want to see how you got the sound to work. Camera connectivity.
Hello,Sir, now i will reply your question:
1.I want to see how you got the sound to work.
Reply:Some cars need to use audio wire (in our box) to connect the AUX AUDIO OUT of Android with the AUX INPUT of the armrest box.
You can view the content at 8 minutes and 20 seconds of the following video:
ruclips.net/video/bp7oNPbFklA/видео.html
2. Camera connectivity.
Reply:You can refer to the video below to connect
ruclips.net/video/zOgU6CJmtyU/видео.html
@@pempcar my backup canera did not come with both red and yellow connectors. This is where I’m having the trouble.
@@AnthonyMichael504 pls send me email, service@pempcar.com, Send me some pictures, our service team must have a solution.
Can the 4G and GPS antenna go under the dash, out of sight?
As long as they can receive signals properly, they are fine.
Question? My original entire screen went out. It stated no signal, made a loud screeching sound now no longer works. Not sure if i need to replace the screen, radio, fuse or what? I saw your video & I believe if i replace it with an upgraded screen it might work. My radio isn't working or the screen. I heard the screens get hot then blow out but I am desperately trying to avoid paying BMW just for diagnoses for them to tell me i need a new one. I have a 2013 Bmw 528i. Thanks
Dear, I will answer your question now.
1. This pemp adroid screen fit your bmw 2013 528i;
2.if your original car head unit is normal but just the display is broken, you can replace this android display.
3.But if there is a problem with the oem head unit, you can't solve your problem by replacing the display.
4. How to judge the problem of the OEM display or the host?
If you can hear the sound of the radio, the original main unit may not be damaged. If you can't hear anything, the fuse or head unit may be damaged.
5. I suggest that you purchase the PEMP android display only after the original car host is repaired, so as to avoid the Android display also not working because the original car host does not work.
@@pempcar thank you makes sense
Hello i instal same product but i have no conection to cars oem menu. My friend told me that optic is no conection how can i solve the problem f10 2012 520d with cic system. Thanks
Please check your OEM display, whether the lvds is a 4PIN interface or a 6PIN(4+2) interface, if it is a 6PIN interface, you need to use NBT to install it, otherwise the original car information cannot be displayed on the Android screen.
@@pempcar thanks
My screen is not working. In addition to LVDS cable I also have another wire connected to my original CIC screen. I’m unsure what to do with this additional connection as I do not see any instructions in the installation guide for this. Where should the additional cable be connected? (2011 bmw 528i for reference
I believe the other wire you're talking about that connects to the OEM display is the power wire, which doesn't need to be connected anywhere after installing the android screen (which is already getting power). Please check your ISO harness connections to make sure they are working.
If you still can't get it to work, please send your purchase order number with the issue to our after sales service team email at service@pempcar.com
did you get any solution for that problem? i have the same car and the screen doesnt recognize the oem sytem and also i dont have any sound
@@edgarmartinez2000 Please contact our after-sales service team at service@pmpcar.com, they can surely solve the problems you encountered.
@@edgarmartinez2000 I was able to correct the issue with my screen. I did not correctly attach all the cables to the PEMP screen when I initally installed, that is the reason my screen did not work. The extra cable I was referring to in my initial post does not need to be plugged in and can be left hanging. The problem I had with the sound is because I had to connect the PEMP system to the AUX is the center console then select the PEMP setting to play OEM. Hope this helps
would this work on a 2011 528?
no, 2011 528i is probably a CIC system, so not suitable for it. The following products are suitable for CIC.
www.amazon.com/dp/B08YRC1GP7?ref=myi_title_dp
How to distinguish NBT and CIC, you can check your OEM display LVDS , if it is 4PIN, it must be CIC system. Please refer to the 5th picture of the linked product。
Hi e need help i purchase one but e have in menu screen a suv image car and mine is a 5 série can i change the imagem?
I understand what you mean, Did you choose the ID7 interface?this picture is part of the UI and cannot be modified. Thank you for your understanding.
After Install, the sos system is trigerrnd, i have so many warnings ? What to do ?
You don't have to worry, you first check whether the fiber optic cable is switched. At the second minute and 30 seconds of the video, there is a process of converting the fiber optic cable. You refer to the video for transfer.
If the error still occurs after the transfer, you can restore the original car state. After the fault disappears, disconnect the power supply of the car and install it again.
How to check if you have NBT or CIC ?
You can refer to the 6th picture in the product link（www.amazon.com/dp/B091CXX3HL?ref=myi_title_dp）, and judge according to the OEM interface and the number of LVDS PIN bits of the OEM screen. If it is 6PIN(4+2) LVDS, it must be NBT.
Would be good screen if the sound would not.go through aux, sound quality is terible. would buy it of only it be a screen without android functions as it looks really good.
Yes, you are right. all sound can only go to the stock car via AUX.
If I’m goin to just use hotspot do I have to put the 4g antenna ? Or that’s only for sim
You are right, the 4G antenna is only used for receiving signals after inserting the SIM card. If you do not use a SIM card, you do not need to connect the 4G antenna.
@@pempcar thanks! u guys reply quick. I just purchased this off of Amazon I will be installing tomorrow !!
@@Bands264 Your choice is our honor, thank you！
@@pempcar hey I installed it but no sound . What do I do
@@pempcar oh I didn’t run the aux cord
👍🏻👍🏻👍🏻
thanks
Will it work on my 2012 528i?
Dear, you need to know whether your car is CIC or NBT, if your car OEM display LVDS is 6PIN, it is NBT system, the following products are suitable for your car:
www.amazon.com/dp/B091CXX3HL?ref=myi_title_dp
Will this work In 2012 535i ?
Dear, you should check the oem screen LVDS is 6pin or 4 pin. if it is 6pin, you need buy NBT, if it is 4pin, you need buy cic.
What is factory password? What needs to be done to ensure that the car's original i-drive is displayed correctly? Now it is incorrectly scaled.
What is factory password?
Reply: 070305
What needs to be done to ensure that the car's original i-drive is displayed correctly? Now it is incorrectly scaled.
Reply: Settings>factory settings>pass word070305>car display> pls Choose the most appropriate option. 1, 2, 3
This is nbt or cic ?
This one is NBT, cic and nbt are same of install.
CIC System: www.amazon.com/dp/B091CYVZMP?...
NBT System: www.amazon.com/dp/B091CXX3HL?...
I have 2011 550i double deck. I got the CIC version will this one work
Jose, if your 2011 550 is a F10 CIC, following link fit your car.
www.amazon.com/dp/B09TKBPFYT?ref=myi_title_dp
It appears to work but my heat and air conditioning are not working properly now after having hook up. Is it a shortage in power
@@josefasacothelordofbeats7623 Yes, the air conditioning cooling needs to work with the engine started. Android screen it will not affect your air conditioning work. You need to check again if the connection cable behind the A/C panel is connected properly?
@@josefasacothelordofbeats7623 were you ever able to correct this? I’m facing the same issue with my A/C after installing.
How to get sound for Apple Car play sound for navigation and phone
Please turn it to the maximum sound in the original AUX interface, touch into the Android interface, use the Android default music APP to play music, can you hear the sound?
A, can not hear, please connect the Android audio cable to your armrest box AUX IN. you can refer to the following video to connect;
ruclips.net/video/xLSkppSq-kM/видео.html
B, You can hear it, but there is no CarPlay sound. Please check if your phone is connected to the original car's Bluetooth. If it is, please disconnect it , only connect PEMP's Bluetooth.
does it work on bmw 530i 2012?
Dear, you need check the lvds is a 4pin or 6pin of the oem screen, if it's a 4pin, it is a CIC, you need buy cic screen: www.amazon.com/dp/B09TKBPFYT?ref=myi_title_dp
if it is a 6pin, it's a nbt, you need buy nbt screen:
www.amazon.com/dp/B09TKD9WBV?ref=myi_title_dp&th=1
if you have any question, pls send our after-sales team, service@pempcar.com
Is this fitting same for all of these type of screens?
No, it only fit bmw f10.
@@pempcar i mean for all brands for the f10? I purchased one from Ali Express
@@golfergti I can only confirm that this product from PEMP is suitable. If it is another brand, you need to send me the link, and I will judge.
Should there be any issue if the phone is connected to OEM and the android screen simultaneously using Bluetooth? Skipping sound etc?
@@golfergti You may not be able to get the sound of CarPlay , we recorded a video dedicated to this issue.
ruclips.net/video/56vY6RIDg54/видео.html
Hi, everything works fine exept that the AC and heating stopped working after installing the screen, any ideas?
Antworten
Please check that all wiring harnesses of the air conditioning panel are all connected again.
@@pempcar you mean the two of the lowest panel? On the very left and right? They are, I checked it.. :/
@@cokakada1189 Wiring harness in 2 places at 0:28 & 1:42
I never knew Alpinenwas partnered with BMW.
Yes, there was Alpinen in the early days, and now it's mainly Harman.
How do you change the themes for the dashboard?
Touch the left side of the instrument display interface.
@@pempcar doesn't work.
@@matthewduran1374 please send the order number to our after-sales team at service@pempcar.com
Where does the sim for 4g go
At the top of the screen, there is a slot for the SIM card. You need to buy a SIM card and insert it yourself.
How I can download Netflix in this system?
Sorry, can't sopport Netflix now.
You can download kodi and get the Netflix add on. Works perfectly.
there is a fix for this, think you have to download an older apk file, someone made a video about it
Can you develop one for the e90?
This is a good idea, but E90 needs to cut the instrument panel. Do you accept it?
@@pempcar I'm talking about the e90 with iDrive.
@@Mike335is May be is E92, Has OEM 8.8inch LCD,right?
@@pempcar no... the e92 and e90 both share the same dash...
heres a post I found showing the OEM lcd
www.e90post.com/forums/showthread.php?t=1608150
@@Mike335is OK, I see, this one is CIC e90, it can not change to 12.3", but it has a chance to change to 10.25 inches, just like E60（https:
//www.amazon.com/dp/B08N4B323M?ref=myi_title_dp）. But it is different from e60 in terms of structure and cannot be shared.
Will this work on a BMW 535i 2014?
Yes, it fit your bmw 535i 2014.
Bmw f10 523i can?
Yes, it fit your bmw f10 523i, but you need know the OEM interface is ID3 CIC or ID4 NBT. The android screen diffrent.
Original bmw is better. Do you have not enough android gadgets in your life?
Respect everyone's point of view.