Gravity Powered Motor Kinetic Sculpture
HTML-код
- Опубликовано: 2 июл 2019
- Gravity Powered Kinetic Sculpture Plans is a 22 page digital download of instructions, sketches of parts, and pictures to follow to help you build this unique wooden kinetic sculpture. No batteries or plug ins needed. Sculpture uses a hanging weight to power the escapement wheel that pushes a pendulum that turns the flywheel. Art piece is made of plywood parts that you will make. Some 1/4'' bolts and a 1 small bearing are needed but the rest is wood. Material list of parts needed will help you along. The Gravity Motor is approx. 12'' wide x 20'' tall x 4'' deep after you build it, and the hanging weight measures approx. 8'' wide x 15'' tall x 2-1/4'' deep after you build it. This is a faster moving kinetic sculpture that will run approx. 4-5 minutes after you crank up the weight. Definitely a challenging unique wood project, sure to be a conversation starter. Would look good in your home or office after you make this project. I left mine plain, but you could stain or paint parts of the Gravity Motor to give it a different look. ( Plans are a digital file that you can download immediately after your purchase and print out from your computers printer. It is the same idea as someone emailing you pages to read and you print it out on your printer.)
NOTE: This is building plans ONLY as a digital download, NOT a kit.
Press or click the link below for the building plans I offer on Etsy.
www.etsy.com/ca/RJparkavenue/...
Or click the link below to visit my website.
www.rjmyrchak.com
He's NOT posting this as perpetual motion! It's a sculpture driven by a weight through an escapement. Read his description! JEEZE!
this isn't real dude just because he made an excuse saying "oh it only runs for 5 minutes" no it wouldn't run at all.
@@nootaboot7042 That's odd, it's been working for Grandfather clocks for 100's of years.
@@areslucas4326 Nobody gives a shit.
@@nootaboot7042 moron, it shows the weight he uses to power it in the video, he didn't say it was perpetual motion, it isn't perpetual motion. It's literally...like...did you watch the video??? Did you read the comment you replied to??? How many things had to go wrong for you to type that?
Look : ruclips.net/video/TQjpSSbQUYE/видео.html
It was 999 likes until I liked it... I've never been the chosen one before.
It's causing me to rethink and ponder much in my life.
Happy 1k likes. Nice work.
Liar
Thanks for the laughs "chosen ONE"....ha ha ha....made my afternoon.
The SCIENCE of... gravity powered motors!
Good job ! 👍🏼👍🏼👍🏼👍🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
Wow amazing
cool!!!
Galileo escapement with a nice twist producing the rotary motion opposite the pendulum! That's cool!
Awesome.. 👏👏👏👏🙏🏻🙏🏻😱😱😱
thats so cool
Just downloaded my plans awesome time to begin.
Galileo escapement..👍🏻🎶
It's basically the same thing how a Grandfather clock works, with weights and pendulum. Nice home-made sculture though.
Abusing the physics engine as usual.
(Joke)
The Machine uses the weight to allow the wheel to speen
Long lasting theory might be the battery of future.But through machines.
👍👍👍
HI its amazing, how would you slow it down if you wanted to?
Andrew Hodgson, normally, the longer the pendulum the slower the swing, but because I placed a link arm from the pendulum to the wheel, it kind of locked in the speed. If you made a longer pendulum to slow the swing, then it would also affect the swing above the pivot point. To achieve the same stroke distance needed to turn the wheel, the pendulum length above the pivot point would also need to be lengthened, the wheel placed higher up, to have the same stroke distance for the link arm to turn the wheel a rotation. When I made this, it was trial and error, and to compensate for errors, I made the link arm holes larger for more slop on the pins that are on the wheel and pendulum. It’s all the little things that make the difference when it comes to how these things work out. Too much friction between moving parts, is the biggest problem. Use bearings if feasible in your design for moving parts, and fender washers in between moving parts provide less friction than wood on wood. If you’re going to make the pendulum longer, then you may need to have a heavier hanging weight so the force applied to turn the escapement wheel to push the pendulum is greater.
just increase the length of the pendulum below the pivot - below that hammer-head shape. or just cut off the hammer head and lower it downwards using a stick. kis
There’s a thin string tied around the cogwheel, and it’s being pulled down and to the right. Look closely!
There’s actually a pulley system too and with a very fine fishin line.
@@MagnetOnlyMotors 🔴 What Is Islam?
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
Use a longer pendulum
How long before you have to raise the weight?
About 3 or 4 minutes, then you have to crank up the weight again.
Its funny how people on youtube see a kinetic sculpture and assume its a free energy scam
Why Didn't Modify it to get a Led ON by this
🤔🤔🤔🤔🤔
Magnetic field have some resistance in it. Adding it would change the system depending on the weight of the pendulum and how strong is the magnet.
si le ponemos un iman de neodimio i una bobina prenddemos un leed
X supuesto, la gravedad hara el resto
Sometimes, the scuplture ticked to the music.
Is this the perpetual motion?
Simply reading the description would tell you it isn’t.
Where can u buy one of these? Anyone?
Check description
@@hyxl3r254 both the links in description are not working for me. Are they working for you?
Mostrar planos para construir
Now figure out how to hook two spring motors together and have the springs go back and forth winding each other
Only issue how would u reverse the gears so it can switch one spring to the other using this same mechanism that only allows one tooth to tick at a time
It's the last time I say. Stop wasting gravity!
Yes, you're right. It's criminal to waste the gravity on that way.
What a person study or work with to learn about this kind of machines?is it a kind of engeneering?
Grandfather clocks have used weights as a power supply for a long time.
This video shows a fun sculpture. It's not new science.
How do I get plans for this 1:13
Information is in the description
But...how it works??
Like a grandfather clock.
the machine has a nylon thread. look 0:50 time lapse.
Yep, it is supposed to. The Thread is attached to the hanging weight below (near the floor). This is not purporting to be perpetual device, just a gravity (via weight) assisted device.
you are a genius................................... "Gravity Powered Motor Kinetic Sculpture"!!!!
Add small generator and powered led light
We can add fan to its wheel and this will blow air into a windmill
volla! Free electricity
You still have to lift the weight.
Attach the generator to the wheel directly. No need for a fan if you want to make electricity from lifting a weight.
Cant you do like an dc generator out of it?
Gus96 the whole device is pretty gutless. Too much friction anywhere will cause it to slow down or stop. I’m not saying it’s impossible, but the hanging weight would probably have to be heavier to compensate for the extra friction of a tiny dc generator running a small led bulb.
@@rj40m ah i didn't realize, thanks for replying
@@rj40m what about setting up multiple of these and connecting them to one main spinning generator?
Are your kids watching up?
string is visible.
Cole I hope so. The string is integral to the successful operation of the kinetic sculpture.
slap a generator on the fly wheel and u get electricity free of cost
You still have to lift the weight.
@@ddegn true but still better than hand crank
Where is the motor?... Free energy is not possible with this machine... Dissipative dynamics are present in this mechanism
It's not a perpetual motion machine, nor is it claiming to be one. There's a weight in the system. You can see it at 0:31. It's a pendulum bob clock mechanism; The weight slowly falls, converting its potential energy into kinetic energy. That's why the weight is so massive, since potential energy P = mass x 9.81 x height, so the larger the mass, the more potential energy available to the system. At some point, the weight will need to be lifted back up, which is exactly what happens when you wind up a pendulum bob clock.
Don't even bother man, there's always a guy like this in very single innovation attempt, their minds are so limited they have to complaint to the world that they just got called a "lesser mind" through tangible results.
@@Rulox999 hahaha... it is Science, is not about belive something... THE VIDEO SHOULD BE CONTAIN A LABEL THAT ADVICE THAT THE MECHANISM IS NOT FREE ENERGY... if you don´t like the rigor of the science then get out
@@BV2 Yep... there it is. Good job "science" Karen, thanks for policing and regulating the title of this video. We will take in consideration your opinion and toss it in the "very important" pile. We here on the internet really care about being kept aware of ways in which to increase the safety of your pointless sensibilities.
@@Rulox999 really?... that is your answer???... hahahaha I understand why you are so angry about a simple question... hahahahaha