THE NEW 2023 XRAY XB8 - FINISHED BUILD & FIRST TEST REVIEW

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 57

  • @MsChabs7
    @MsChabs7 Год назад +1

    awesome., i enjoy watching

    • @kings-racing
      @kings-racing  Год назад +1

      Thank you very much Ms Chabs. I appreciate it ❤

  • @tonysands2837
    @tonysands2837 Год назад +1

    This is next level definitely 💯 wicked race setup great job 👏 bro

    • @kings-racing
      @kings-racing  Год назад +1

      Thank you very much brother appreciate it👊

  • @TastyBRC
    @TastyBRC Год назад +2

    This was a long awaited video for me! Very good job with your home made carbon fiber parts 👍If the bulks didnt break after 2.5L and a couple of good crashes, they will never break!! I seriously think that Xray should build and provide the same king of plate, easiest and cheaper solution rather than making a new bulk! now for the droop problem... thats another stuff, lets hope that they will fix that issue in 2024 model because i dont see a solution other than milling the upper arm.

    • @kings-racing
      @kings-racing  Год назад

      Thanks buddy 👊. 2,5,L is enough for the first test. Do wonder if it's the carbon plate that it didn't break. Maybe remove it and try again😅
      I wait till xray comes up with something.
      Apperently this "droop issue" is also on the 2022 model. But nobody saw it. Another guy with the 2022 checked his after i told him and there were scrappes aswell.
      The design is good, but could (should) be better imo. Deffinitely gonna mill some upperarms for running more droop. My droop was at 104 mm now and upper arms in the center. I just don't want it to hit!! Thanks for watching 👊

    • @galaxyadit
      @galaxyadit Год назад

      I need advice , wanna start play nitro 1:8 scale but curious to compare which is the best or let say fun for play brand ? I tend to buy yokomo mp10 but xray get me stuck. About the budget no worry. Thanks for reply credit for u

  • @islandrc-duke1972
    @islandrc-duke1972 Год назад +1

    awesome build and cool run on the track

  • @cyclonerc1625
    @cyclonerc1625 Год назад +1

    Nice build my friend. Good luck with the upcoming race 👊👍💯✌

  • @MrBoomtheroom
    @MrBoomtheroom 16 дней назад +1

    So was the bulk head fixed in the 23?

    • @kings-racing
      @kings-racing  16 дней назад

      Yes. Although i didn't have any problems with it. Everyone who bought the car recieved bulkhead updates, two times.

  • @ofnaguycarlwatts8602
    @ofnaguycarlwatts8602 Год назад +1

    Wassup Kings here supporting Brother.love the music as well, don't make music like that anymore bc they can't!!

    • @kings-racing
      @kings-racing  Год назад

      What up Carl 👊 Thanks, they sertainly don't. Those were the times🤘👊

  • @delawarepro3539
    @delawarepro3539 Год назад +1

    Tuned👌 🏎💨💨

    • @kings-racing
      @kings-racing  Год назад

      Thanks👊 love this engine 💯👍

  • @NitroFreak
    @NitroFreak Год назад +2

    new rig looking sweet kings hope all is well loved the intro tune metallica nice track time ur getting it done

    • @kings-racing
      @kings-racing  Год назад +1

      Thanks bro👊 all is well and having some fun. Thanks for watching 👍

    • @bharris0128
      @bharris0128 Год назад

      Sounded like a remix, but great some regardless.

  • @ekj24000
    @ekj24000 Год назад +1

    Awesome bruha keep up the great work 👍

  • @TangoOne
    @TangoOne Год назад +1

    Man I'm torn between this, the Tekno or the HB

    • @kings-racing
      @kings-racing  Год назад

      I think (from what i've seen)the xray and tekno are the most durable out of your choice. So the next question is if you want pivotball or c-hub? Parts availability? Think with either cars you would be very happy.

  • @Emily_xx5
    @Emily_xx5 Год назад +1

    1st 🥰 and shared

  • @theRCcarshow
    @theRCcarshow Год назад +1

    nice rc. i love it

  • @xskyaflake
    @xskyaflake Год назад +1

    My hero 👌👌

    • @kings-racing
      @kings-racing  Год назад

      😂😂😂Happy to be your inspiration 🤣👊

  • @r.h.5646
    @r.h.5646 Год назад +1

    How are the new FX Engines running? Maybe i buy an 502 for my rebuild Agama Truggy?

    • @kings-racing
      @kings-racing  Год назад

      They are all really great. Depending on the track ofcours, i think i would prefer a K303 in a truggy. But they all would do just fine👍 Thanks for watching 👊

    • @r.h.5646
      @r.h.5646 Год назад

      I have an LRp 28, do they have the same Power for Racing? I thoud the 502 is the Race Truggy Engine???! 🤔😂

    • @kings-racing
      @kings-racing  Год назад

      ​@@r.h.5646 I don't have a Lrp. 28 so i don't know the power, but the fx engines have plenty of power.
      These engines are all suited for buggy and truggy. It just depends on the track and what you prefer.

  • @jonpye8655
    @jonpye8655 Год назад +1

    Thanks for using the head cam and the engine is music to my ears. This test session, are you still getting 10+ minutes of run time?

    • @kings-racing
      @kings-racing  Год назад

      Thanks Jon 👍 This 303L is definitely my favorite. Stil over 10min, but very little margin to save a pitstop with laptimes of 36sec. That's quite risky Thanks for watching 👊

  • @hotrod67rc6
    @hotrod67rc6 Год назад +1

    🔥💨💯👍

    • @kings-racing
      @kings-racing  Год назад

      Thanks for watching brother 👍 appreciate it 👊

  • @ofnaguycarlwatts8602
    @ofnaguycarlwatts8602 Год назад +1

    King's now that's Great in all aspects brother.a True test of show and tell buddy.i don't know if it means anything coming from me. But I think you're right about doing a lil bit of shaving. I'm a welder/fabricator 33 yrs.i have found many ways to modify good and bad experiences. But I think if you could take a lil from allthe moving parts in the meeting conjunctions. you would benefit more that way.but it's not possible in all cases who knows where the exact breaking points are to be exact.so that being said dividing the amount up would be best.take look at how deep the rubs are añd go from there.just my opinion I'm sure you already know everything I've said but sometimes by someone saying it can help get the old brain housing group working better as in my old 🧠 😂 that being said I hope something I said gets your gears a turning.sometimes all I need is someone to give me an opinion then my brain kicks in and out thinks the other opinion.sometimes I get my best ideas that way 😂😂 not trying to insult your intelligence Buddy. I'm sure you have it figured by the time it took you to read this non sense I've said 😂 Good brain storming.its not luck bc I don't believe in it 😂

    • @kings-racing
      @kings-racing  Год назад +1

      Thanks Carl 👍 just sharing my thoughts no sugar coating it is how it is. Always think in solutions, not in problems. Deffinitely gonna do a bit of shaving for running more droop. It was now at 104mm and some tracks i run up to 106mm and i don't want it to hit. It's just not how it should be imo.
      Thanks for rewinding my old brain. I'm gonna take notes right away. You know how it is with older brains, they intent to forget things 😂😂
      Thanks for watching buddy 👊

    • @ofnaguycarlwatts8602
      @ofnaguycarlwatts8602 Год назад +1

      You got it kings.hope anything I said might of helped.i have Lil talent myself made my own con rod by Hand success so far! I try to watch everything you you put out .much respect My Friend. Keep up the great vids.i don't know any that are better than yours!! I don't sugar coat myself likewise!!

    • @kings-racing
      @kings-racing  Год назад +1

      ​@@ofnaguycarlwatts8602 not many make their own conriods, that's awesome!!! 👍. Thank you very much for your kind words 👊

    • @ofnaguycarlwatts8602
      @ofnaguycarlwatts8602 Год назад +1

      @@kings-racing Thanks my Friend!

  • @DavidVidaurri
    @DavidVidaurri 11 месяцев назад +1

    What kinda buggy did you run before

    • @kings-racing
      @kings-racing  11 месяцев назад +1

      Before the xray xb8 '21 i was running the tlr 8ght x elite

  • @brandenbreen2667
    @brandenbreen2667 11 месяцев назад

    What’s the top speed on this car?

    • @kings-racing
      @kings-racing  11 месяцев назад

      Never measured it. It also depends on the gearing, but i guess around 50 mph

    • @brandenbreen2667
      @brandenbreen2667 11 месяцев назад

      @@kings-racing ok thank you

  • @r.h.5646
    @r.h.5646 Год назад +1

    And i thoud, you try the agama n1 😂

    • @kings-racing
      @kings-racing  Год назад

      😂I actually still want the N1, it's so damn cool. But still having doubts. Not gonna race it, but to run at the track sometimes to test it and just look at it on the shelf 😅 it's a awesome looking platform.

    • @r.h.5646
      @r.h.5646 Год назад

      Word 😂

  • @jonpye8655
    @jonpye8655 Год назад +1

    I don't know what your using to cut that carbon fiber, be sure to wear a respirator you don't want to breathe the dust in from cutting it.

    • @kings-racing
      @kings-racing  Год назад

      I always wear a mask. You just see those particles whirling through the air. Even with a tiny bit of sanding. Got the inside of my nose black once, not ever again!!!

  • @DavidVidaurri
    @DavidVidaurri 11 месяцев назад

    Oh never mind

    • @kings-racing
      @kings-racing  11 месяцев назад

      Did i miss something

    • @DavidVidaurri
      @DavidVidaurri 11 месяцев назад

      I put never mind because when I was watching your video I saw you old X-ray