HI Olivier, what a treat to our "older" woodturning eyes to see a process we have been using called "THERMING" ... You revived and totally refined it to modern level of 2022 !!! It is always a treat to watch your Utube posts !! .... don't ever stop !
"Therming". Never heard the term till now. Thanks for sharing that! I'm not a wood turner, per se (I RARELY turn wood), but it's always nice to learn the proper nomenclature.
I put a strobe light on my wood lathe that was synchronized with the rotation of the lathe. Dim the back lights, turn on the strobe light, and suddenly the spinning blurry wood stock was freeze frame visible. Stunning! There was on odd desire to touch it, so I had to remind myself it was still moving. I added another control that would delay the sync pulse from the lathe to the strobe, so I could effectively slowly rotate the spinning wood, and select the side I wanted to see. I learned a lot from that strobe setup, especially about tool edges and how they cut. It was as if I touched the tool to the wood, and instantly I could see the ring develop around the stock. A real mind blower. It was too addictive, and I didn't know the long term side affects of watching it, so I disabled it and gave it to a friend: Mr. Geiger. I always hoped he would patent it and make it popular, but there is the downside of inducing seizures.
Instead of a strobe light, could you use a video and monitor set to synchronize? I saw a video not long ago that stopped the blades. Very cool! Good luck!
@@shirleyostrander6531 Good thinking it'll work and a spinning aperture geared to the lathe works too. Anything beats harmonic blinking, eye got two tired.
I remember the boiler room in my church growing up (dad was the trustee) had some moving parts with warnings all over it because it was rotating at the same frequency as the fluorescent lighting, making it look motionless. It was inside a cage, but otherwise, it could easily tear off a hand.
For those who think you can just do things because of your high quality equipment; forget them. The stuff you come up with is just so amazing. You are insanely gifted.
@5:46 It's at this point when I always ask... what in the world is he doing?! I never skip to the end, because it's so cool to watch your process. I love your videos- always interesting, always precise, always with a beautiful end result. Thank you for sharing.
My woodshop teacher in the 70's would have loved this. That technique is something that I would never have thought of. Great job, you have the skills to make a real go of it. 🌟🌟🌟🌟🌟
Just sheer genius! You are at the intersection between engineering and art, where one becomes the other. So much fun to watch! Thank you so much for posting
I'm 6 minutes in and my dude got me confused and impressed at the same damn time. I build cabinets for a living, and do custom stuff as a hobby. I can build just about anything, but the creativity to come up with things like this is something, I have to admit I'm jealous of. You earned a sub for this and I ain't finished it yet.
Very nice. Used a similar technique to make speakers for my apartment, as a student. Added a adjustable, telescoping type, each on it’s own standard. Articulation and barbell from lifting set weights. Lots of fun to be found in working with Wood. Closing in on 80, I’m a Retired, Sand County Almanac, Forester by degree and vocation. Thanks, these videos bring back memories. Now? I sit on the Dock, grow orchids, sketch pretty pictures and write bad Haiku. Everyone stay safe 👍🏽 Thanks
4 real. I thought they were table legs at 1st. I was like, "that's a genius way to make matching legs" ... it would have been a short table or bench but they looked great.
@@bwrightaway2877 That's a good guess. Makes sense and could definitely be accomplished with this technique. I just thought he would end up putting them together as a larger, funky/tricky shaped container.
These pieces are absolutely gorgeous. So minimalistic yet refined and exciting in their appearance. I am blown away by the craftsmanship and the design!
J'ai apprécié chaque minute de cette vidéo Monsieur Olivier. Idée simple, exécution précise et beaux résultats. Merci, comme toujours, pour le partage. 🙂
Watching a talented person do what they are good at is as much of a treat as watching a sunrise. Thank you for that. And kudos for keeping your work area clean enough to do finish work. That lets me know more about your work habits than anything else.
I'm slightly embarrassed to call myself a wood-turner after watching several of your videos...this is absolutely stunning 'next level' work. Beautiful work...cheers.
I am still rubbing my eyes in disbelief As a 75 year old retired toolmaker that was amazing and I have seen a few things in my day . Congratulations from Australia
@@nigelparker5886 Thanks Nigel I needed a bit of cheering up in these dark days . Happy new year to yourself and family take care and stay safe and enjoy BEXIT . Cheers from Down Under ..
This young man has a combination of amazing skills. He has inventiveness, the ability to foresee how his project will turn out, and great artistry in creating it. Even with complete directions another very skilled artisan may not be able to duplicate his creations. He seems to have that X factor that it takes to be a fabulous sculptor, painter, or composer. I love watching him create and I hope he remains prolific and creates a large body of work.
Such a delightfully sycophantic comment. Of course, I'm happy to be corrected, but I'd be grateful if you could post links to the composed, painted and sculpted works of this novel lathe operator. I'll wait.
Absolutely awesome! Especially the end when you put in the glass insert! Not too snug, not too loose, just right! I bet that felt as satisfying to do as it was to watch!
I have no idea where you get your ideas from, but keep going there because you sir have that something special and unique about your work. Truly talented Oliver. Please don't stop what you are doing ! I think the world need something like this right now.
OMW!!!!!!!!! I don't know how you can see what you are turning and designing when the timber is rotating at such a ridiculously fast speed! You skill and ability to produce works of such beauty just blow my mind🤯🤯🤯😍
I can't even begin to imagine what would happen in case of a snag. I was wincing through the entire video. Definitely something best reserved for very skilled lathe workers. Amazing.
You know Olivier when stand in front of the lathe I never know what is going to happen. Again you showed us what an awesome and amazing young man you are. There is always a big surprise when you are finished. It is just awesome and stunningly beautiful magnificent and spectacular.
Those were amazing. I've never seen anything like that before. Your artistry knows no bounds. Lovely, lovely work, Olivier. Thank you for the beauty you create.
Huh, I think I finally understand how certain old-fashioned chair legs and balustrades were "mass" produced. I couldn't imagine how anything that wasn't totally round or totally square could be added so evenly until now.
Weirdly enough, i think key cutters are another good way to visualize the process? No clue if thats actually how it's done in the industry, but its a clever way to pretty closely duplicate a piece!
Amazing! It also challenged me to think about the build process because it's not obvious until the very end why you can't just simply make one vase at a time with this technique. Well done!
Mate that was totally awesome. Had no idea where you were going with it at the start but i was totally blown away with the end product. Just subscribed and will be watching more of your clips
Hey, you might have a good reason to wear gloves, but it is considered dangerous. You are reaching a big audience with your fantastic work, and some people could think that this is fine. NEVER wear gloves or loose clothing when working with rotating machines, stay safe :)
@@motog4-75 The risk is that even when being as careful as possible, the gloves can become snagged on the piece itself, or on the machinery you’re working with, and essentially pull the hand into the machine. Needless to say that if machines can do work on hard wood, they can obliterate fleshy human meat.
Incredible work, dude. I especially like how you did NOT align the middle/darker wood perpendicular to axis. It makes for a much more amazing/unique design. Cheers!
As an old woodworking geezer, I watch you wearing gloves, and not using a pusher on your table saw, and I cringe. At least you left your splitter on - but holy moly. My Dad used to try to save the fingers of professional woodworkers who got lazy and/or stupid around table saws. Sometimes he was able to. But more common were nasty injuries from the kickback getting them in the gut. And look, I know that you know what you are doing. We all do. But when and if you lose fear of your table saw, a horrible accident is on the way. I am so scared of table saws I won't have one in my shop! There is no such thing as "bad luck" in a workshop. Fear is what keeps me safe when I am working. And I am so glad that many tools still scare the shit out of my. My angle grinder scares me spitless, even knowing how each quadrant works. My routers give me the absolute willies! And even my electric plane makes me very careful. When you have had a doctor for a Dad, and he's a woodworker, and he's a repairer of woodworking injuries, you develop a very healthy respect for power tools, and how to avoid being sucked into them, or having them kick into you. I wear bullet-proof chaps when I am chainsawing, for example. And a hardhat, goggles, and a face shield!
Thanks so much for sharing these treasures with us! Absolutely amazed at these, what a fantastic product and what a wonderful process you use to make them!
hey dude i stumbled upon your channel a bit earlier and i am absolutely obsessed with this in the best way possible. the sheer patience you have with this is frankly amazing, it's inspiringto watch! i never know what you are doing with this at the start, ever, but it's always worth it to stick around and watch (p.s your editing is very laid-back and perfectly suited for this sort of thing as well!) quality content, my guy, keep it up :D
When you started boring the end, but before you put the glass in, I was expecting these to become a set of table lamps - with a bulb base at the top, and a cord running down and out near the bottom :)
Awesome work! You could make hexagonal, or any rounded polygonal shape, and for an extra challenge, add a 5 degree twist in steps so the polygon rotates up the z axis by say 90 from bottom to top.
Just chanced upon your video. Generally skip forward when I watch these woodturning projects - to see how they turned out. But this video I kept replaying to understand how you visualized the end result. Stunning!
HI Olivier, what a treat to our "older" woodturning eyes to see a process we have been using called "THERMING" ... You revived and totally refined it to modern level of 2022 !!! It is always a treat to watch your Utube posts !! .... don't ever stop !
"Therming". Never heard the term till now. Thanks for sharing that! I'm not a wood turner, per se (I RARELY turn wood), but it's always nice to learn the proper nomenclature.
I had to look it up after you mentioned the wording term in wiki en.wikipedia.org/wiki/Therming
I always referred to the rigging of it as a Carousel. As in a carousel like at a fair. lol. to each their own I guess.
Thanks I had to look it up. New to woodturning but the possibilities are really amazing. This young man is AMAZING. love his work
I put a strobe light on my wood lathe that was synchronized with the rotation of the lathe. Dim the back lights, turn on the strobe light, and suddenly the spinning blurry wood stock was freeze frame visible. Stunning! There was on odd desire to touch it, so I had to remind myself it was still moving. I added another control that would delay the sync pulse from the lathe to the strobe, so I could effectively slowly rotate the spinning wood, and select the side I wanted to see.
I learned a lot from that strobe setup, especially about tool edges and how they cut.
It was as if I touched the tool to the wood, and instantly I could see the ring develop around the stock.
A real mind blower.
It was too addictive, and I didn't know the long term side affects of watching it, so I disabled it and gave it to a friend: Mr. Geiger.
I always hoped he would patent it and make it popular, but there is the downside of inducing seizures.
Instead of a strobe light, could you use a video and monitor set to synchronize? I saw a video not long ago that stopped the blades. Very cool! Good luck!
"* blades of a helicopter. *
@@shirleyostrander6531 Good thinking it'll work and a spinning aperture geared to the lathe works too. Anything beats harmonic blinking, eye got two tired.
I remember the boiler room in my church growing up (dad was the trustee) had some moving parts with warnings all over it because it was rotating at the same frequency as the fluorescent lighting, making it look motionless. It was inside a cage, but otherwise, it could easily tear off a hand.
@@verdatum Wow...too weird!
For those who think you can just do things because of your high quality equipment; forget them. The stuff you come up with is just so amazing. You are insanely gifted.
tools / no talent = bad,
talent / no tools equally bad.
Tools, talent, creativity = craftsman
You just never cease to amaze me. It boggles my mind how you come up with these ideas. Absolutely gorgeous as usual!
@5:46 It's at this point when I always ask... what in the world is he doing?! I never skip to the end, because it's so cool to watch your process. I love your videos- always interesting, always precise, always with a beautiful end result. Thank you for sharing.
yes, then I said "ohh, it is going to pass them twice..".. and then "oh no, it is going to be 4 times".. lol..
My woodshop teacher in the 70's would have loved this. That technique is something that I would never have thought of. Great job, you have the skills to make a real go of it. 🌟🌟🌟🌟🌟
Just sheer genius! You are at the intersection between engineering and art, where one becomes the other. So much fun to watch!
Thank you so much for posting
I'm 6 minutes in and my dude got me confused and impressed at the same damn time. I build cabinets for a living, and do custom stuff as a hobby. I can build just about anything, but the creativity to come up with things like this is something, I have to admit I'm jealous of. You earned a sub for this and I ain't finished it yet.
Beautiful work. So refreshing to see woodturning without all the epoxy.
After watching a billion turning videos, there’s something I’ve never seen 👏🏼👏🏼👏🏼 well done!!!
The vision and imagination going on inside his head is amazing. He must dream up this stuff and just make it happen. Unbelievable talent
Very nice. Used a similar technique to make speakers for my apartment, as a student. Added a adjustable, telescoping type, each on it’s own standard. Articulation and barbell from lifting set weights. Lots of fun to be found in working with Wood. Closing in on 80, I’m a Retired, Sand County Almanac, Forester by degree and vocation. Thanks, these videos bring back memories. Now? I sit on the Dock, grow orchids, sketch pretty pictures and write bad Haiku. Everyone stay safe 👍🏽 Thanks
Wow! That’s an ingenious way to turn 4 vases at the same time! Beautiful!
It's not faster to do it this way. The main reason to use this method is to get facets, which you cannot get by turning one at a time.
ФАНТАСТИКА!!!🤗👍👍👍. Не перестаю восхищаться вашей работой и мастерством. Вы СУПЕР!!!🙏
This is the most innovative thing I've ever seen on a lathe. WOW.
4 real. I thought they were table legs at 1st. I was like, "that's a genius way to make matching legs" ... it would have been a short table or bench but they looked great.
@@bwrightaway2877 That's a good guess. Makes sense and could definitely be accomplished with this technique. I just thought he would end up putting them together as a larger, funky/tricky shaped container.
Thats funny, I was thinking it was one of the scariest things Ive ever seen on a lathe...
@@bwrightaway2877 Therming
I can't believe how creative you are - not to mention how good a turner you are. Love to watch your videos. Thank you
Je prends toujours autant de plaisir à regarder vos vidéos
Vous êtes un artiste !
These pieces are absolutely gorgeous. So minimalistic yet refined and exciting in their appearance. I am blown away by the craftsmanship and the design!
J'ai apprécié chaque minute de cette vidéo Monsieur Olivier. Idée simple, exécution précise et beaux résultats. Merci, comme toujours, pour le partage. 🙂
Watching a talented person do what they are good at is as much of a treat as watching a sunrise. Thank you for that. And kudos for keeping your work area clean enough to do finish work. That lets me know more about your work habits than anything else.
I'm slightly embarrassed to call myself a wood-turner after watching several of your videos...this is absolutely stunning 'next level' work. Beautiful work...cheers.
I had no idea what to expect, when clicking on the video. But the process is just relaxing to watch, and the result is amazingly beautiful!
Goodness, as a wood turner myself, those are truly gorgeous, friggin amazing pieces and execution!
I am still rubbing my eyes in disbelief As a 75 year old retired toolmaker that was amazing and I have seen a few things in my day . Congratulations from Australia
Congratulations from Austria
If a fellow toolmaker gives it the nod, then I’m with you fella! Cheers from England!
@@nigelparker5886 Thanks Nigel I needed a bit of cheering up in these dark days . Happy new year to yourself and family take care and stay safe and enjoy BEXIT . Cheers from Down Under ..
This young man has a combination of amazing skills. He has inventiveness, the ability to foresee how his project will turn out, and great artistry in creating it. Even with complete directions another very skilled artisan may not be able to duplicate his creations. He seems to have that X factor that it takes to be a fabulous sculptor, painter, or composer. I love watching him create and I hope he remains prolific and creates a large body of work.
Such a delightfully sycophantic comment. Of course, I'm happy to be corrected, but I'd be grateful if you could post links to the composed, painted and sculpted works of this novel lathe operator. I'll wait.
Absolutely awesome! Especially the end when you put in the glass insert! Not too snug, not too loose, just right! I bet that felt as satisfying to do as it was to watch!
That top-down shot at 6:12 is amazing, I'd love to see more of those
Top level skill
No music
No chatter .
Thank you Olivier
The geometry involved blows my mind. Incredible design, outstanding skill.
I love seeing people’s sheds, tools and techniques.
...and love making patterns to help create a complex shape, reproduce a shape and reduce waste.
Wow Olivier you never cease to amaze me with your creativity. Beautifully made 👏
I have no idea where you get your ideas from, but keep going there because you sir have that something special and unique about your work. Truly talented Oliver. Please don't stop what you are doing ! I think the world need something like this right now.
google Therming, old technique
faut reconnaitre que c'est du beau travail et l'idée du tournage est judicieuse ! bravo!
I am a Certified Wood Turning RUclips Video Watcher.. and this is new for me.. I appreciate it..
Bravo Olivier super et encore merci pour cette vidéo tu es un vrai artiste 👋👋👍
OMW!!!!!!!!! I don't know how you can see what you are turning and designing when the timber is rotating at such a ridiculously fast speed! You skill and ability to produce works of such beauty just blow my mind🤯🤯🤯😍
I can't even begin to imagine what would happen in case of a snag. I was wincing through the entire video.
Definitely something best reserved for very skilled lathe workers. Amazing.
Идеята за тези оригинални произведения е страхотна !!! Блестящо представяне !!! Красиви, нестандартни и харесвани !
You know Olivier when stand in front of the lathe I never know what is going to happen. Again you showed us what an awesome and amazing young man you are. There is always a big surprise when you are finished. It is just awesome and stunningly beautiful magnificent and spectacular.
Genius is indeed an infinite capacity for taking pains. Thank you, Olivier - a genius indeed. Best Hugh
Those were amazing. I've never seen anything like that before. Your artistry knows no bounds. Lovely, lovely work, Olivier. Thank you for the beauty you create.
From concept to design to fixtures to turning...all phases are amazing.
Well done
Huh, I think I finally understand how certain old-fashioned chair legs and balustrades were "mass" produced. I couldn't imagine how anything that wasn't totally round or totally square could be added so evenly until now.
ruclips.net/video/aAD5yGaHunw/видео.html
Another method, which is probably what was used before they had a high precision balanced chuck lathe.
Weirdly enough, i think key cutters are another good way to visualize the process? No clue if thats actually how it's done in the industry, but its a clever way to pretty closely duplicate a piece!
Thank goodness you put your mind to creating beautiful works of art instead of World Domination! Nice work.
I just love to see craftsman doing their thing! It's almost always beautiful :-)
Bonjour Olivier Gomis quelle idée géniale d'une pièce réaliser ces 4 merveilleux vases. Continuez.
WOW... for the longest time I was like... four legs? Nicely done as always
Extraordinaire de voir la complexité des formes obtenues par la combinaison de mouvements simples. Beau travail.
Stunningly inventive and beautiful work, Olivier. A joy and a privilege to watch.
Best in the game, by far. Another banger from Mr. Gomis!
What a cool technique! I’ve never seen this done before. Beautiful pieces as always. 👍
I'd love to spend a day in a wood shop this nice. Love seeing stuff like this.
Hi Oliver, another masterpiece of design. The vases are absolutely beautiful, thank you so much for sharing this video 🤗🤗🤗
I get a smile when I see a new post from Oliver, it's going to be interesting. Well done Oliver!
That was a great idea to make 4 vases at once, truly ingenious, great job! I love that jointer/planer combo you have. 😃
An imagination, an the skill to bring it to life. Bravo!.
I guess we could say his skills are blossoming with each new piece he does. :D
Magnifique, très beau travail.
Un seul mot me vient : bravo !
Комментарий в поддержку канала и ролика, а также труда мастера Оливье.
Je découvre la chaîne dans mes reco et je vais juste binge watch absolument tout car c’est trop beau
Amazing! It also challenged me to think about the build process because it's not obvious until the very end why you can't just simply make one vase at a time with this technique. Well done!
Really one of the best turning projects I've seen on YT. Bravo.
this is some mindblowing method for wood turning!
Wow! You stated with square went to round then back to square. That was awesome!
This would be a fantastic way to make very unique matching table legs
Bravo!
I never know where you’re going but it’s always fun watching you get there!
Um excelente trabalho parabéns gosto muito de ver suas obras de arte Um grande abraço.
Talk about mass production. It takes someone with much imagination to do something like this. Congrats. Well done.
Mate that was totally awesome. Had no idea where you were going with it at the start but i was totally blown away with the end product. Just subscribed and will be watching more of your clips
Cheers mate
What an amazingly creative turning project I've seen yet. Nice!
Hey, you might have a good reason to wear gloves, but it is considered dangerous. You are reaching a big audience with your fantastic work, and some people could think that this is fine. NEVER wear gloves or loose clothing when working with rotating machines, stay safe :)
This needs to get pinned
Nerd. Chicks dig scars
I think the shop is not heated and it might be cold...but you are right about gloves being hazardous
@@ykkfamily 😳 hazardous?
I would of thought it's a must to ware gloves.
@@motog4-75
The risk is that even when being as careful as possible, the gloves can become snagged on the piece itself, or on the machinery you’re working with, and essentially pull the hand into the machine. Needless to say that if machines can do work on hard wood, they can obliterate fleshy human meat.
You are super creative and skilled. It's always interesting to see the stuff that you make.
Incredible work, dude. I especially like how you did NOT align the middle/darker wood perpendicular to axis. It makes for a much more amazing/unique design. Cheers!
Bonjour c'est un plaisir de voir tes créations superbe maîtrise de ton art un maestro fini bravo
Amazing job my dear friend 👍 Greetings from Ukraine 🇺🇦👋
Master at work. Beautiful artwork Olivier.
Maravilhosos, belíssimas peças, parabéns!
WOW👏🏼👏🏼👏🏼 I don’t know how u dream up these things, but they’re amazing & ur fascinating to watch create them 👏🏼👏🏼👏🏼
It did not look like much when you were in the process, but it looks fantastic. Well done.
Tu m'as régalé là dessus. Bien vu. Vraiment bien vu.
You have a great talent for wood turning. Strangely It's relaxing pleasing to watch.
So satisfying. I could never do this in a million years, but he makes it look so easy.
Absolut interessante Arbeit, tolles Ergebnis. 👍👍👍😎✌️
Waouh ! quel travail et quelle technique ! Bravo
As an old woodworking geezer, I watch you wearing gloves, and not using a pusher on your table saw, and I cringe. At least you left your splitter on - but holy moly. My Dad used to try to save the fingers of professional woodworkers who got lazy and/or stupid around table saws. Sometimes he was able to. But more common were nasty injuries from the kickback getting them in the gut.
And look, I know that you know what you are doing. We all do. But when and if you lose fear of your table saw, a horrible accident is on the way. I am so scared of table saws I won't have one in my shop! There is no such thing as "bad luck" in a workshop.
Fear is what keeps me safe when I am working. And I am so glad that many tools still scare the shit out of my. My angle grinder scares me spitless, even knowing how each quadrant works. My routers give me the absolute willies! And even my electric plane makes me very careful.
When you have had a doctor for a Dad, and he's a woodworker, and he's a repairer of woodworking injuries, you develop a very healthy respect for power tools, and how to avoid being sucked into them, or having them kick into you. I wear bullet-proof chaps when I am chainsawing, for example. And a hardhat, goggles, and a face shield!
Thanks so much for sharing these treasures with us!
Absolutely amazed at these, what a fantastic product and what a wonderful process you use to make them!
hey dude i stumbled upon your channel a bit earlier and i am absolutely obsessed with this in the best way possible. the sheer patience you have with this is frankly amazing, it's inspiringto watch! i never know what you are doing with this at the start, ever, but it's always worth it to stick around and watch
(p.s your editing is very laid-back and perfectly suited for this sort of thing as well!)
quality content, my guy, keep it up :D
Never thought I'd enjoy watching watching a man playing with his wood, but here we are
When you started boring the end, but before you put the glass in, I was expecting these to become a set of table lamps - with a bulb base at the top, and a cord running down and out near the bottom :)
Thank you once again for sharing your skills. These are absolutely beautiful!
Awesome work!
You could make hexagonal, or any rounded polygonal shape, and for an extra challenge, add a 5 degree twist in steps so the polygon rotates up the z axis by say 90 from bottom to top.
You never fail to drop my jaw at least once per video.
Отличная работа 👍
Just chanced upon your video. Generally skip forward when I watch these woodturning projects - to see how they turned out. But this video I kept replaying to understand how you visualized the end result.
Stunning!
Que trabalho maravilhoso parabéns!
I don't know how you come up with these ideas but I'm certainly glad you do!
This technique could be used to make railing spindles 4 at a time with more consistency. Very interesting!
no
As expected, An unexpected, god-like production from the young genius, Mr Gomis. You'll never cease to amaze, astound and confuse. Thank you.
It's strange when you try to think of turning something "odd" like a square, but when you see it done, Oh yeah, the lightbulb comes on.
Another winner from the creative genius! I sure do enjoy watching you work.