International DT466E Comeback - Hard / No Start, Low Oil in HPOP Reservoir, Oil & Air Leaks, Welding
HTML-код
- Опубликовано: 16 фев 2020
- The rust bucket plow truck is back in the shop! The truck does not like to start since I worked on it and it's my fault. So we need to fix it. Plus it's leaking oil, leaking air, and the plow frame is broken...
I'm trying another new editor (VideoPad), so things may be a little weird. So far I like it. 
Авто/Мото
It takes a good man to own up to his mistakes ! MUCH RESPECT
And to do it in front of nearly 30,000 people? There should be more people like Wes, he's a real man. If you're not making mistakes, maybe you aren't trying hard enough, there's no substitute for experience. Showing others your mistakes is a bonus for anyone into mechanics and learning how to do better.
Show me a man who never made a mistake and I'll show you a wimp who never did, learned or achieved anything. Because you are honest I would take my vehicles to you for repair.
⭐⭐⭐⭐⭐
EXACTLY!!
How much are you willing to bet on him not making this mistake again? Especially after admitting it on youtube.
Indeed it takes a very good man in fact!! Amazed that it got oil pressure at all!
Don't beat yourself up about it, mistakes happen. You're man enough to admit it. Great video all the same
My son is in tech school to be a maintenance tech for busses and trains. I'm going to show this video to him as an example of how to conduct yourself. If you make a mistake, own it and move on. Lesson learned. There is nothing that replaces honesty and competence. Thank you for being such a great example to everyone, regardless of what profession you are in. Also, thanks for all the comments from those that have been there and done that. They emphasized the importance of the lesson you have given us.
The amount of sheer respect I have for you is enormous, I’ve been there, standing outside the bosses office, wondering if there was a way I could make it seem like it wasn’t my fault, but I got more respect for owning it and the boss didn’t give me one lick of grief cause he knew I beat myself up enough for the both of us. Great job man
Been there, done that. Good bosses remember the 99.999% of the time you get it right. Good employees earn that trust a little bit everyday.
Must be one of the rarest things on RUclips, somebody admitting they made a mistake.
Much respect. I'm sorry I can't like this more than once.
Same here! Keep up the excellent work Wes!
Nope tom from @positivelead. Has admit it much respect to both.
@@kd5byb 😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅 47:21 😅😅
Don't be so hard on yourself. As my father always told me, " if you don't make any mistakes, your not doing anything". I know how you feel though. Sometimes we just want to kick ourselves in the ass. But, it could have been worse.
Yeah if the engine had spun a bearing or something as a result of all that air going through it. Remote chance but still.
Hello!
As a retired truck repairer I love to watch you working. I almost smell the trucks and sometimes I wonder why my hands are not dirty after an hour of working with you :)
Many would have left out this video instead of revealing a mistake. That is what happen to all mechanics, we all make stupid mistakes sometimes. My worst was the gear which lay on the working table (instead of deep inside the gearbox) when I had finished the assembly of a gearbox in a truck :)
Keep on the good work!
In 20years the worst thing I did was rebuild a Cummins L10, when I was refilling it with oil, I filled it went to lunch filled it again, started it for the first time, it smoked and blew oil out of the dipstick, killed it and told my boss I think I messed up something in the top end, after some swearing he told me to tear back down, While draining the oil I realized that it had much more then 40qts, refilled it only once this time. started it up checked for leaks and seal issues - it was fine and I had to go tell my boss what I did - it was many years before I was allowed to forget it.
I have to admit… anyone that embraces humility like you did and seem to do whenever it’s necessary is the absolute salt of our earth. I appreciate your work and how much you honor being truthful with your work. Much praise to you and your work.
Respect, that was honest reporting. And I for one think that you are a smart cookie when fault finding, a very good presenter and a great teacher too.
You called it. Air getting in to the oil. That was pure deductive reasoning and it takes huge intellect to reason one's way to an answer that is physically invisible. Well done.
"experience" is what you get when you didn't get what you wanted !! old saying from my grandfather.
Win with humility, lose with dignity. Good job, teacher.
Education is always expensive. Sometimes painful.
I though the theory on the oil pick up was well explained, and totally plausible, in a way you were still correct, not stupid by any means things happen.
Yes. It seemed so likely that I couldn't believe it when I found nothing wrong. I was just looking in the wrong place.
But the bright side is you will never make that mistake again and you helped save one of us the same fate . Thank you
It's Good that the customer brought it back instead of telling people you're rubbish and letting you fix problem. Everyone at some makes a mistake. Doesn't mean your bad mechanic just human.
No matter how good or bad of a mechanic you are there's always that ONE machine that will keep coming back to haunt you.
Hey he who never made a mistake, never done anything. Thanks for all your great videos, love them and your presentation of them.
when working on a US Submarine you MUST have the instruction of whatever it is you are working out, open, on the page with current step. Additionally the current step must be circled and the previous step with a line through the circle. One day I was cruising along because I knew the process via muscle memory and my supervisor came by and just hummed at me and gave a little frown... He asked a couple rhetorical questions about the book and said "I gotta go over there for 5 minutes and I'm gonna came back and inspect your process & progress." That was my queue to get my book keeping in order pronto. Turns out the Cap't was on his way down to inspect his boat and my supervisor was checking to make sure no one would have to be written up for allowing process to slack while the work completed was charging ahead.
I have been working on my own cars for nearly 30 years, my mistakes have never injured or killed anyone and never cost more than visiting a garage. I see that as success.
Hey the last perfect guy was nailed to a cross, you’re only human.
Very well put.
jason9022
LOL You don’t know who the perfect man is. Educate yourself.
Let us bow our heads and give a moment of silence for our brother Wes, who finished a project and committed the sin of Ignoring the Extra Bolts. We have all been there, too. Amen.
If I understand correctly, the problem was that the "Extra Bolts" weren't standing there shouting "You forgot me!" because the old hardware was replaced with new. So it wasn't a case of not seeing the "Extra Bolts," but not seeing the empty bolt holes, which, in this particular case, were a lot harder to see.
Mistakes are always better teachers than successes. Thanks for showing us reality
you showed the customer that you can be trusted, and that you did not fabricate another excuse...good man..it will be realized in more business....
Once again, a very impressive, well thought out presentation and explanation. Always look forward to your videos. Great job .
I agree!! Not only is Wes a good mechanic, but he is a darn good teacher.
I am gong to make sure the doors are locked when that thing goes. To funny!!!! Great video!
You're not an idiot- you're a human who makes mistakes. I'm glad you've repaired it and returned the truck to service. You're a fine troubleshooter and a conscientious guy. You made a mistake and corrected it. Nothing was wrecked or ruined. You are a better mechanic after this experiment. I admire your hard work operating your own business. God bless.
Thank you!
Wes, we’ve all been there. You can’t screw anything up if you don’t do anything!
Don’t feel bad about it, it just a learning thing.
Been in a Machine trade for 48 year and still make mistakes. Just move on bud.
Enjoy your videos.
Good work Wes. You shouldn't be hard on yourself. You're man enough to admit the easy mistake. I make my share of silly mistakes. Take care
You are human. Not your first mistake, won't be your last. I admit my mistakes, no matter the consequences. Mad props for your honesty.
I respect a man who owns up to his mistakes and then show us what the mistake you made was. Don't beat your self up over it. As you said your human and humans make mistakes. Your a good teacher too I have learned a lot from you.
Thank God they still put that pink thingy on pencils so we’re still allowed to be human. Anyone who hasn’t messed up just picked up his first wrench.
Certainly appreciate the integrity to own up to a mistake. Always aiming for a perfect job done so the amount of mistakes is less. More than once I have finished my own repairs to figure out I messed up some step along the way. Never fun especially when time is of the essence. Again appreciate the sharing and integrity so we can learn along with you.
Wow! So crazy... I did the same exact thing many years ago with the same two bolts. Those two bolts have been in my tool box all these years and have haunted my dreams, because I knew better.
Really? That's pretty wild.
In a world full of "pass the buckers", and flat out bullshitters, well an honest man is a rare treasure and you are a fine good man. And no one is harder on ourselves then our own self. I'm glad I'm not the only man who is the way I am.
Ahhh...a day in the classroom at the School of Hard Knocks!! You never forget those lessons, especially when they hit the wallet. Thanks for being honest and showing us your mistake. We have all done it at some point. Anyone says differently is not being honest.
It takes a brave man to admit his mistakes on camera, but like ye said it may prevent it happening to someone else. Respect to you!!
I've always told coworkers, or apprentice mechanics or anyone who just in general likes working on cars.
The best thing you can do, is always own your mistakes.
A mechanic that makes a mistake and admits it is a honest human being, and the best mentality a mechanic can have.
If you make a mistake and know you did, but are too prideful to admit you're wrong go do something else.
Hats off man, we all make mistakes at some point in our careers and we all know you didn't do it intentionally.
I don't even work on big trucks, but i love your videos.
You held your hands up to your mistake, top man, top marks for that. Don’t forget that the bloke who’s never made a mistake has never made anything, atb from England
Wes you are an honest man you will go far. People are craving your kind of honesty and know how.
This video is the reason I watch this channel. You tell it exactly how it is. Total respect dude!
It takes a big man to admit defeat and admit you were wrong. But to make a detailed video about cause and cure is unheard of. Most so called mechanics would no sooner admit defeat then he'd admit he sold it to a customer that way. Steller work my man, absolutely untouchable. Great videos and God bless:- )
I did it. Might as well come out with it.
Stuff occurs! It really sucks when it happens, but on the bright side, there was no catastrophic failure! Thanks, Wes!
Honest, humble and a mechanic, unheard of!
Good to get a definitive diagnosis. Frustration to find that out! We have all done this type of thing.
Just have to mirror many comments on this. It takes allot of character to own up to our humanity in front of the world. We have all been there, and few have handled it with such honor. Thank you for sharing
We all make mistakes. Its how you handle them that makes the difference. We watch your videos because your a straight, up honest guy.
None of us are perfect Wes but I’d say you are closer than most just for owning your mistake and educating us on being a real man👍
I take my hat off to you. You are an honest man. That’s why I enjoy watching your videos. Don’t beat yourself up. Keep the great videos coming.
Just keep one thing in mind Wes. There has only ever been one "Perfect" person EVER! And he could walk on water. The mere fact that you are willing to own up to your mistakes makes you special. There are way too many people who refuse to take responsibility for their actions. My hat is off to you.
Takes guts to broadcast your mistake fair play to you,your a brilliant mechanic and I love watching your channel 👍🏻👍🏻👍🏻👍🏻
Don't beat your self down to much. I think your a good mechanic and even good mechanics have a bad day.
I've worked on these engines for a while at a dealership and a private fleet. I can't believe it built base engine oil pressure without those bolts. Blows my mind. I like that you admitted your faults. Good luck man
Even if you made a costly mistake, it's always a good day when you can find the mistake, wrap your head around what went wrong, and preserve your relationship with the customer. They'll be back, and you will recoup the loss.
I have a 2001 DT466E with less than 70K miles. Runs excellent. I love this video. You give me confidence that I could actually figure out future problems. I am a subscriber.
Shit happens...we all have done something similar when we started out...hell I did it more than once
In the 40 plus years I spent on the wrenches, I made my fair share of mistakes.
I used to get all upset about it, later in life I turned it more into a learning episode.
A few of them were pretty costly.
Those old plowtrucks and salt trucks y'all have up there have to be one of your biggest nightmares to work on.
You are not an Idiot, an idiot would blame someone else for their mistake. Thanks for sharing. Great video!
Wes, it is a very large pain to admit a mistake, especially in front of many people. Great job, you are great mechanic, a genius at what you do, the fix for any mistake to try to never make it again. No mistakes, no learning!! No learning, nothing gained. Great job as always!!
Great video on the explanation of the issues. As a long time diesel tech my self it takes a confident diesel tech to own up to his mistakes. Were all human and it does happen.. keep up the awesome videos
News flash......we all mess up. I respect the fact that you wanted your viewers to know you aren't perfect either. Well done Wes.
No one is easier to fool than yourself.Wise beyond your years ,young man!Keep up the great work.Greetings from St Antoine Abbe Quebec Canada!
Mistakes suck, especially expensive ones. But they’re a part of life.
I'm enjoying your channel, your honesty, tips, down to earth approach and the fact that you own up to your mistakes and share them... The bringing back to life of so much "forgotten dead' machinery is of great interest... Thank you :)
My dad was a diesel mechanic for 30 years. Man I'm glad I just have to drive them. 🤣🤣
If the top brake air hose was a swivel, and the bottom wasn’t, somebody didn’t crack the swivel loose on top when they replaced the can the last time and didn’t count how many times they twisted when they went back on.
You’re an excellent mechanic and a humble man. Thanks for giving a great lesson on intl engines.
Well Wes it again was a joy to see you work🛠👍 and thanks for sharing that mistake 😉
It happens to the best of us. Thank you for sharing so honestly .
i remember these old trucks back in the day they ran great for years simple and easy
I’ve got seat time in a 4900 with a 530 and it was my favorite truck to drive once it warmed up. Enjoy seeing these old goats on your channel.
I feel for you working with all the rust. We don't have rust in my part of Texas, but after years of heat and sun, plastic tabs and connectors become brittle and crumble in your hand, so sometimes even simple bulb changes require some wiring work.
This time you done it right, remember we all make mistake's, just another day..!
The time you take…. Never assuming the viewer cannot understand. I appreciate it. Be well friend.
We're all human, Wes..... Don't feel bad, we've all done stuff like this. And if someone tells you they haven't made this type of mistake, they're either lying to you or it just hasn't happened to them yet. But don't worry, it will. A true mechanic/technician can find and fix his mistakes. Good work, Sir!
Very interesting video, well done on admitting your mistakes and learning from them!
I couldn't really see the fault in the truck but I can see allot of blame on the owner of the truck.
I consider myself a dam good mechanic but Everytime I WATCH WES WORK I learn something new,Wes you are by far one of the best and most thorough mechanics I've ever seen and I enjoy watching you work lol
In situations like this I always revert to Occam's Razor. When faced with two wildly different explanations for a particular occurance it's human nature to want to believe in the most elaborate and fantastically impossible explanation. In most cases its the most simple explanation of the two. You are a joy to watch and I respect your willingness to keep learning and growing as a human. I'm just so glad that's not me under that god awful truck!!
Right. The solution with the least number of variables is usually the correct one.
Fair play to your honest side🤙
Sends chills down my spine for you to go thru this, but you are a great professional.
Honest mechanics tends to get most good customers.
Those double acting boosters are deadly. When I was an apprentice I saw a driver try to open one using a jack on the rear hitch of his truck, without the locking pin for the park brake side. As soon as the clamp was removed it jumped apart and hit him straight in the head. Outcome one driver unconscious for quite some time with a big hole in his forehead. Lucky to be alive. I was always weary thereafter. No locking pin no repair.
For a kid, you do damn fine work.
When I was a supervisor I always told my employees, never feel bad about making a mistake. Mistakes are part of learning.
When I was a licensed aircraft mechanic an engine mistake cost you your job. Customers were billed $100 per hour for my wrenching time. I made $6.00 per hour. Aircraft work is covered by federal laws and the Feds. dont miss anything when they look back on a crash that was caused by something a licensed mechanic screwed up. You would lose your license and could be sued by the shop and the customer. No shade tree mechanics allowed.
@@timmayer8723 I see your point of view, but I was generally speaking on learning measuring concepts and general mental stumbles.
Lutemule when you have the FAA breathing down your neck and your work privileges in jeopardy you have a whole different attitude towards your possible mistakes. Except for unhappy customers and a bad opinion of your work (not yours personally) car and truck mechanics are free to do their worst/best work and sleep soundly.
@@timmayer8723 I hear you.
22:53 That face and that feeling is so damn relatable. Had a supercharger suck in an old piece of gasket when I was swapping a throttle body on a Mustang. That simple 2 second brain fart turned a 10 minute job in to a half day job. Had to pull the whole supercharger off, clean out the old gasket pieces, inspect the rotors for damage, etc. We've all been there to some extent. At least you were able to find the smoking gun, and like others have said, kudos for owning up to it. It's those aggravating moments that we really learn from. Keep up the good work.
I'm sure it won't be the last screw up!
I have always had a pancake in the truck with me. 4 or 5 times from the early 80's. Its saved me from a service call on the road.
Also thanks for the tip on the brakes, I cage brakes for my safety but its always nice to see other people, Good idea for the hoses.
You could have never posted this video and we would never have known. You are a good man and like others have said, much respect.
You are a fantastically humble man, agree with others “DON’T BEAT YOURSELF UP” but you are man enough to own a simple human error😊. Love your site learn so much.
Takes some big huevos to post a video like this on RUclips and admit your mistake. Well done. I really enjoy the channel, keep up the great work!
Oh, it's the Red Nemesis again! As frustrating as this must have been, it did make for a fascinating video, better than any drama on TV. I loved your theory about aerated oil, and I was almost as disappointed as you sounded when the pickup tube came back good. The other explanations weren't nearly as convincing. I'm just glad you finally got to the bottom of it. That was a sweet sound when it just started up and ticked over.
Yeah, I'm glad I found something, even if it was a mistake on my part.
Any mechanic who has been in this industry long enough has had more than one of these scenarios. Good on you for coming clean.
Your not an idiot your a very good mechanic. It happens, something you will laugh about later.
" Nobody easier to fool than yourself " gonna keep that.
Credit to you Wes for being honest, and because of that it made a great video.
Al.
We are all human and make mistakes. You figured it out owned it and fixed it - like a man - thank you.
Props to the man who admits his mistakes. Everyone who turns a wrench makes a dumb mistake that they kick themselves in the ass over. You never forget your fails.
Shit happens man. A mistake every now then doesn't do you any harm, found it humbles me a bit and makes me take more care.