_Spend the money, and stick with SMC or even Spektrum batteries. They are far and away superior quality cells that last, and outperform everything else thats on the market that comes from China!_ _The K8 is such a great choice of RC.. out of the box they are actually capable & fun!_ _This is one that any enthusiast can easily grow into, and even go down the rabbit hole of doom spending upwards of 4,000 or more!_ _Wanna see something thats absolutely bonkers with one of these things, that not many people are doing..._ _Remove the front differential, and front drivetrain/CVD's.. make this thing an over sized rear wheel drive stadium truck! Gives this truck a whole new level of madness to play around with!_
I just bought 3 pair of the same but 7200 mah 120c batteries because they were such a good deal. Hoping you got a bad pack because I’ll be bummed if I just bought 6 junk batteries. I almost went with the 80c but the 120c had great reviews. There were almost the same price so I figured why not. I didn’t think they could be worse.
Man i was crying inside watching you run those awesome tires on a parking lot i think you should look into getting some on road belted tires i have the duratrax on kraton 8s exb and love them so you dont chew up your off road tires also get some SMC SRD packs i got a set of 8600 and 6200mah SRD's the best or nothing
Thanks Nick! Me too! That was the only time I will run this rig on asphalt, was just trying to get a true speed with the Magmas 😂 Hearing a lot of good things about the SMC packs, I will definitely get some, thanks again!
I got 2 sets of the zeee 3s 10000mah 120c for my fireteam and they have been great 🤯 thats 1200a max🤯 still very low resistance. Great batts. Got the set for like $85🤯 think other set of same was about $100 from zeee store on eBay. 😁 Sweet truck man. Would love to get a set of these wheels too 😉 been looking at them. Great deal right now. $135 delivered for my truck 🤯😁 was worried a6the ballooning but they look pretty good. Could always put a set of zip ties around each side of center lug if wanted. Or soldier some tiny cable to right size. I have 1/16" aircraft grade cable 😁
They don’t need lube. It’ll just gunk up with dirt. They were just over tightened or tightened themselves while driving. I have hot racing aluminum inserts and they have an O-ring in there that keeps them from moving once you get them set. They work perfectly. Never had any issues with them loosening or tightening. You just need to tighten them up and back them off about a 1/4 to 1/2 turn so the ball can move freely in the joint.
I was tempted to use oil and grease on all of the unlubricated parts but I quickly learned that it just attracts dirt and makes things wear faster. Everything other than the bearings and differential gears are designed to run dry. It’s annoying since I’m used to a little oil making everything run smoother but it’s not the case with RC’s. I do oil the pinion/spur gear but it flys right off on the first run usually
Using the stock tires, 26T pinion and CNHL 9500 racing batteries I am getting 60 mph with my new Kraton EXB RTR. I haven't tried the included 23T or 30T pinion. I changed mine to a 26T right out of the box. I added some foam tape to the top of my rear body mounts and to the sides as my body rattled like crazy. It is nice and quiet now.
@@Doug_Morgan Awesome Doug, I think the 31t pinion is too big. I like the 26t idea. Going out for a RIP tomorrow on grass to see how it performs. Really liking this RIG!
@@paulgaddini Love mine as well. Once you start jumping with it you will find it is very stable in the air. I have only had 4 sets of batteries through mine so far so I haven't done anything wild with it yet. (except hitting a steel football goal post which snapped my left side pillow balls off). It is all fixed again, I got lucky lol.
@@paulgaddini lol, nope. I was jumping off a slope at the edge of the high school practice field that has a slope coming up to the field. I was standing in a spot to keep the post behind me so I wouldn't hit it. But then I decided to approach the field from a different angle to get a better jumping spot with more slope and didn't reposition myself to keep the post behind me. I came off of the jump and as soon as I rotated my view as it was going past me I realised my mistake and smashed right into the post with the front left wheel hard.
Hey brother go ahead and get the M2C pivot ball retainers there are two separate pieces and so that way they don't tighten or loosen based upon the activity of the truck they function just like the 6s rigs this was a big mistake by Arrma to make it one piece
I got the 6s one . Before I knew some things I tried a 15t pinion on a 90 degree and killed the stock esc 😂. Next is a max6 g2 with the stock motor . I ll start gradual this time upping the pinion . Them tires sound good running . The most fun I’ve had with the RC s is with the kcrc ramp . I like natural land jumps when I can find them though . I’ve had no breaks staying under 10’ high . 6’ high is high enough tbh to have air control and time . Sweet ride
Those Magma wheel and tyres look sweet! I might look for a set of those for mine. I’m running the Gens Ace 11,000mAh Bashing 100c packs. My pillow balls loosened off on one side after two packs, which created wobble, but I did notice that they will bind the suspension if you tighten them too much.
I commented on another post about the pillow ball retainers. I have hot racing aluminum ones that have o rings to keep them in place. They work great. Dozens of runs and they never have to be tightened. I think M2C makes them as well. It’s a cheap easy upgrade to not have to deal with the frustration of constantly adjusting them.
You need to find some dirt. That thing is way too clean. Also, the drywall tape/shoe goo hack is the way to go. It will make the body almost indestructible. It gets rid of that plastic sound you’re talking about when landing jumps too.
Sikkk Kraton Sorry Two things Bro you just took one of the best off road tires and ran them on the road to wear down what makes them tires great.... Your toy bro it's all good just suprised. 2, you actually mentioned a really good point about the Hero 7 GoPro I have a 7 and I've been tempted to upgrade but I've never had issues with the seven the only thing I wish it could do is record 120 frames per second 4k..... can you maybe elaborate why the later GoPros are not any better and are there any newer GoPros than the Hero 7 that work better than the 7 and will capture more frames yet don't have the issues that you're talking about.... Appreciate ya buddy
Thanks for this Brother, I just wanted to see the top speed on a hard surface. No more Magmas on asphalt, I promise😂 Ok, so most if not all GoPro's are water resistant which makes dissipating heat a real issue. The newer cameras, 8 and up use much more power to run and have bigger batteries. This makes them heat up faster. My experience with the 9 has been terrible. It heats up so fast, even on a cloudy day and shuts off or freezes. I have tried different batteries, rebooting, etc. I also think GoPro is on its way out. They lost their way in the past 4-5 years. They have had a few rounds of layoffs lately, the last one being rather significant. I will not buy another GoPro myself. I have lost/wasted so many videos thinking the thing was recording only to find out it turned off, sucks...
@@KUDRARACING Yes!! Funny I blew apart the passenger side front stock tire and threw on the Magmas. Wish I did it sooner got home from a bash session and then I saw your video where you put on the Magmas. Love it love it love it🎯
@@truthseeker6603 Absolutley! But I wanted to test to speed with the tires I will bash with. Looking for something a bit more than the stock setup of 50mph. This RIG can handle high 50’s bashing. I have a 28t pinion arriving tomorrow and I think that will be the sweet spot for me. Thanks for watching!
@@paulgaddini sounds good man. Listen, I like the 8S Kraton but I’m not crazy about needing to use two batteries and one design flaw is on the shock bodies where they should have threaded them down at least 3/4 of the way so you can really stiffen the suspension and raise the ride height, since there are no additional shock mounting positions. I have an older version of the 6S. Talion and I was thinking about the 8S but I think it might make more sense for me to get the 6S kr.exb rtr since I already have the mamba monster 2200 KV system and a couple sets of wheels and tires. hey, I was curious, where do you live because I noticed the scenic mountains in the background.?
@@paulgaddini sounds good brother by the looks of those mountains. I was thinking Appalachia somewhere. unfortunately, I’m in Philly.-crap, Adelphia💩💩😂😂 by the way can you spare $700 for a 6S EXB?? L O L.
@@smoothwookienookie5912 Wow, tough question. Both?!?🤪 Depends what you are looking for. They are very different RC’s. Kraton is really for fast, more nimble RIPS, but it flies good too. XMaxx is good for jumping, backflipping. Both need a lot of space. They are my two favorite RC’s🤙🏼
@@paulgaddini NOOOO. The raw power and durability for a 30 pound monster is insane for the kraton. Like how it looks to drive like a tank too. But cheap simplicity and plastic parts for the xmaxx, also it's suspension travel and getting over rough terrain, and best durability in class. It's impossible
_Spend the money, and stick with SMC or even Spektrum batteries. They are far and away superior quality cells that last, and outperform everything else thats on the market that comes from China!_
_The K8 is such a great choice of RC.. out of the box they are actually capable & fun!_
_This is one that any enthusiast can easily grow into, and even go down the rabbit hole of doom spending upwards of 4,000 or more!_
_Wanna see something thats absolutely bonkers with one of these things, that not many people are doing..._
_Remove the front differential, and front drivetrain/CVD's.. make this thing an over sized rear wheel drive stadium truck! Gives this truck a whole new level of madness to play around with!_
@@SOMNIOHM Awesome advice! Thank you👍🏼
I just bought 3 pair of the same but 7200 mah 120c batteries because they were such a good deal. Hoping you got a bad pack because I’ll be bummed if I just bought 6 junk batteries. I almost went with the 80c but the 120c had great reviews. There were almost the same price so I figured why not. I didn’t think they could be worse.
@@Whyusemyname Yes, I hope they were bad packs the ones I got🤷🏻♂️
Man i was crying inside watching you run those awesome tires on a parking lot i think you should look into getting some on road belted tires i have the duratrax on kraton 8s exb and love them so you dont chew up your off road tires also get some SMC SRD packs i got a set of 8600 and 6200mah SRD's the best or nothing
Thanks Nick! Me too! That was the only time I will run this rig on asphalt, was just trying to get a true speed with the Magmas 😂 Hearing a lot of good things about the SMC packs, I will definitely get some, thanks again!
I got 2 sets of the zeee 3s 10000mah 120c for my fireteam and they have been great 🤯 thats 1200a max🤯 still very low resistance. Great batts. Got the set for like $85🤯 think other set of same was about $100 from zeee store on eBay. 😁 Sweet truck man. Would love to get a set of these wheels too 😉 been looking at them. Great deal right now. $135 delivered for my truck 🤯😁 was worried a6the ballooning but they look pretty good. Could always put a set of zip ties around each side of center lug if wanted. Or soldier some tiny cable to right size. I have 1/16" aircraft grade cable 😁
@@redreefbud That’s great!
Those are some big ass biceps 💪 dude 👍. Hard work pays off
@@Hungrybird474 Haha, thanks!
I feel like some lubrication would be advisable too. Could be a contributing factor in the binding, and all that squeaking suggests this as well.
@@PowerheadProductions Good point!
They don’t need lube. It’ll just gunk up with dirt. They were just over tightened or tightened themselves while driving.
I have hot racing aluminum inserts and they have an O-ring in there that keeps them from moving once you get them set. They work perfectly. Never had any issues with them loosening or tightening. You just need to tighten them up and back them off about a 1/4 to 1/2 turn so the ball can move freely in the joint.
@@Whyusemyname Thanks! Makes sense👍🏼
I was tempted to use oil and grease on all of the unlubricated parts but I quickly learned that it just attracts dirt and makes things wear faster. Everything other than the bearings and differential gears are designed to run dry. It’s annoying since I’m used to a little oil making everything run smoother but it’s not the case with RC’s. I do oil the pinion/spur gear but it flys right off on the first run usually
@@Whyusemyname Yes, I like to keep things clean and if applicable, well lubed🤙🏼
Using the stock tires, 26T pinion and CNHL 9500 racing batteries I am getting 60 mph with my new Kraton EXB RTR. I haven't tried the included 23T or 30T pinion. I changed mine to a 26T right out of the box. I added some foam tape to the top of my rear body mounts and to the sides as my body rattled like crazy. It is nice and quiet now.
@@Doug_Morgan Awesome Doug, I think the 31t pinion is too big. I like the 26t idea. Going out for a RIP tomorrow on grass to see how it performs. Really liking this RIG!
@@paulgaddini Love mine as well. Once you start jumping with it you will find it is very stable in the air. I have only had 4 sets of batteries through mine so far so I haven't done anything wild with it yet. (except hitting a steel football goal post which snapped my left side pillow balls off). It is all fixed again, I got lucky lol.
@@Doug_Morgan LOL, I sent it a bit, and yes, very stable! Did you make the “kick” or wide right?!?🤣
@@paulgaddini lol, nope. I was jumping off a slope at the edge of the high school practice field that has a slope coming up to the field. I was standing in a spot to keep the post behind me so I wouldn't hit it. But then I decided to approach the field from a different angle to get a better jumping spot with more slope and didn't reposition myself to keep the post behind me. I came off of the jump and as soon as I rotated my view as it was going past me I realised my mistake and smashed right into the post with the front left wheel hard.
@@Doug_Morgan That’s awesome! BASH’EM, BRAKE’EM, FIX’EM, REPEAT!🤣
Hey brother go ahead and get the M2C pivot ball retainers there are two separate pieces and so that way they don't tighten or loosen based upon the activity of the truck they function just like the 6s rigs this was a big mistake by Arrma to make it one piece
OH, great advice brother, I will certainly do that!
Awesome car I subbed 🤘✌️
@@shawnrichardson118 Thanks! Out sending it right now🥳🏹🏹
Those orange Zeee batteries look like they're still in the box
@@Critter0817 Yes, they were at that point👍🏼
Put some pipe tape around the pivot ball screws, they won’t back out or tighten. I did that to my Outcast works fine without upgrading.
OH, now that's a great idea. Teflon tape it is, Thanks!
I got the 6s one . Before I knew some things I tried a 15t pinion on a 90 degree and killed the stock esc 😂. Next is a max6 g2 with the stock motor . I ll start gradual this time upping the pinion . Them tires sound good running . The most fun I’ve had with the RC s is with the kcrc ramp . I like natural land jumps when I can find them though . I’ve had no breaks staying under 10’ high . 6’ high is high enough tbh to have air control and time . Sweet ride
@@Hungrybird474 That’s so good! Love the Kraton’s and looking forward to what ARRMA has coming out soon for us all🤙🏼
Those Magma wheel and tyres look sweet! I might look for a set of those for mine. I’m running the Gens Ace 11,000mAh Bashing 100c packs.
My pillow balls loosened off on one side after two packs, which created wobble, but I did notice that they will bind the suspension if you tighten them too much.
@@JarradDRS You will LOVE them!
Those are great (BIG) packs!
I commented on another post about the pillow ball retainers. I have hot racing aluminum ones that have o rings to keep them in place. They work great. Dozens of runs and they never have to be tightened. I think M2C makes them as well. It’s a cheap easy upgrade to not have to deal with the frustration of constantly adjusting them.
@@Whyusemynamethanks for the heads up mate. I think I’ll be investing in a set soon.
I think you'll get 60+ on a longer straight. Good luck Mate
@@jeremyhoman9076 Thanks Mate🤙🏼
Add the pivot ball retainer issue on my outcast 8S V2, order aluminum ones and haven't had an issue since.
You need to find some dirt. That thing is way too clean. Also, the drywall tape/shoe goo hack is the way to go. It will make the body almost indestructible. It gets rid of that plastic sound you’re talking about when landing jumps too.
@@Whyusemyname LOL! Will do👍🏼
Sikkk Kraton
Sorry Two things
Bro you just took one of the best off road tires and ran them on the road to wear down what makes them tires great.... Your toy bro it's all good just suprised.
2, you actually mentioned a really good point about the Hero 7 GoPro I have a 7 and I've been tempted to upgrade but I've never had issues with the seven the only thing I wish it could do is record 120 frames per second 4k..... can you maybe elaborate why the later GoPros are not any better and are there any newer GoPros than the Hero 7 that work better than the 7 and will capture more frames yet don't have the issues that you're talking about.... Appreciate ya buddy
Thanks for this Brother, I just wanted to see the top speed on a hard surface. No more Magmas on asphalt, I promise😂
Ok, so most if not all GoPro's are water resistant which makes dissipating heat a real issue. The newer cameras, 8 and up use much more power to run and have bigger batteries. This makes them heat up faster. My experience with the 9 has been terrible. It heats up so fast, even on a cloudy day and shuts off or freezes. I have tried different batteries, rebooting, etc. I also think GoPro is on its way out. They lost their way in the past 4-5 years. They have had a few rounds of layoffs lately, the last one being rather significant.
I will not buy another GoPro myself. I have lost/wasted so many videos thinking the thing was recording only to find out it turned off, sucks...
K8 Magmas all day baby!
@@KUDRARACING Yes!! Funny I blew apart the passenger side front stock tire and threw on the Magmas. Wish I did it sooner got home from a bash session and then I saw your video where you put on the Magmas. Love it love it love it🎯
🤙
👀
Them tire’s are looking excellent 👍.
Wouldn’t it make more sense to do a speed run with belted street tires instead of nobby tree trunks to reduce drag and get the most out of your run???
@@truthseeker6603 Absolutley! But I wanted to test to speed with the tires I will bash with. Looking for something a bit more than the stock setup of 50mph. This RIG can handle high 50’s bashing. I have a 28t pinion arriving tomorrow and I think that will be the sweet spot for me. Thanks for watching!
@@paulgaddini sounds good man. Listen, I like the 8S Kraton but I’m not crazy about needing to use two batteries and one design flaw is on the shock bodies where they should have threaded them down at least 3/4 of the way so you can really stiffen the suspension and raise the ride height, since there are no additional shock mounting positions. I have an older version of the 6S. Talion and I was thinking about the 8S but I think it might make more sense for me to get the 6S kr.exb rtr since I already have the mamba monster 2200 KV system and a couple sets of wheels and tires. hey, I was curious, where do you live because I noticed the scenic mountains in the background.?
@@truthseeker6603 Kraton 6s EBX is a BEAST! Get one, I love mine!! Great RC, all around.
I am in the Bay Area, most of the time🤙🏼
@@paulgaddini sounds good brother by the looks of those mountains. I was thinking Appalachia somewhere. unfortunately, I’m in Philly.-crap, Adelphia💩💩😂😂 by the way can you spare $700 for a 6S EXB?? L O L.
@@truthseeker6603 LOL! It’s not cheap, but worth every penny!
🤩🤩👍👍🥳🥳🇹🇭😘🇺🇸👍
@@appleslider999 🤙🏼🥳😁 Thanks🤗
You recommend this or the xmaxx?
@@smoothwookienookie5912 Wow, tough question.
Both?!?🤪
Depends what you are looking for. They are very different RC’s. Kraton is really for fast, more nimble RIPS, but it flies good too. XMaxx is good for jumping, backflipping. Both need a lot of space. They are my two favorite RC’s🤙🏼
@@paulgaddini NOOOO. The raw power and durability for a 30 pound monster is insane for the kraton. Like how it looks to drive like a tank too. But cheap simplicity and plastic parts for the xmaxx, also it's suspension travel and getting over rough terrain, and best durability in class. It's impossible
@@smoothwookienookie5912 Haha, yes, it’s a heavy Girl🤪. I keep my XMaxx as light as possible. Best of both worlds. Love them both!
it will go faster is you drop a few teeth on pinion
@@KiloWattRC Thanks! I have a 28t that I will be trying next week. Thanks for watching and the advice👍🏼
Dont waste your money on those batteries get yourself some smc lipo's
@@nickkoepplinger9204 I agree, I do like the Ovonic brand also
Zeees WILL PUFF OUT BE WARNED. GO SMC
@@robcanthandlestupidy9249 Appreciate that, Rob👍🏼