I WOULD INSTALL A CEILING FAN ABOVE THE STOVE, QUIET, TAKES ALL THE HEAT OFF OF THE CEILING AND PUTS IT WHERE YOU ARE, I HAVE DONE THIS TO MY TALL CEILING AND IT WORKS LIKE A CHARM.
If you don't already have one, you should install a large ceiling fan to distribute that hot air that will accumulate at the top of that shed. Place a thermometer up near the ceiling after the fire has been burning for a few hours. There will be a big difference in temperature between the ceiling and the floor. Heat rises.
We have a similar model. If you pull that catalytic converter handle forward before you open the door you don’t get that puff of smoke out the front of the door.
I have a similar model on order (mansfield) with the cat. When I saw that puff of smoke out the door I thought.... NOOOO, I hope my new stove doesn't do that!!! I started looking through the comments to see if anyone else noticed. Very happy to have come across your recommendation! I'm assuming that pulling the handle forward opens the bypass for the cat, so the draft should be stronger and pull the smoke up the chimney when the door is opened.
@@mdocod yes it bypasses the "catalytic converter" system. We also pull the lever forward when you first start the fire. It helps the air flow and lets the fire grow then you close the lever and it reburns the unburnt fuel left in the smoke. You see very little smoke color if any out of the chimney when that system is working.
I really like seeing Jack's progression as a son, I can relate to it a lot myself. I was raised by my Grandparents. The older I got, the more and more I wanted to connect with my Grandpa and learn from him. Unfortunately he got sick and died very quickly, if I had one wish in life it would be to go back up into the mountains or go fishing again with my Grandpa.
@@cavetteaton you know you have the luxury of wisdom something they do not. You need to be proactive a make situations where they are forced to spend time with you and don't even realize it. Like a water ski trip or something. Motorcycles in the desert or rock crawling. Then you can tell all your cheesy stories. When you're gone they will reminence and recant your stories talking about how cool you were
I live in Connecticut, and a wood stove is my only heat for the past 17 years. The power co. don't care about wood stoves. Most people don't want to do the work to use wood. I cut and split all the wood that I use. Even for the person who buys there wood precut and split, don't want to do the work. Stacking, bringing in the house, feeding the stove. On the very cold nights (10 below or colder) you have to feed the stone all night. Cleaning out the stove every few days. Dealing with the ash. Bugs from the wood piles in the house.
So ever stove has different requirements. As a fireplace technician always follow the manufacturer's installation! Unless told different by your local inspector.
@@tonyfesta3773 yes, manufacturers specifications are always to be followed. I am curious about what kind of pipe it is. The unregulated status of stove pipe is also a recommendation to be followed by the manufacturer of said pipe... But I have not seen any pipe that nears the back of the heater that would allow unprotected clearance of what this stove appears to be placed in. People get awful upset when you pose a question and they don't really know the answer 🙂 and as stated above, Insurance can also jump in there and say whatever they want. Installation of a completely uncertified unit is 4 ft away from everything in the room with particular allowances for thermal protection underneath the unit as well. It's amazing what can be certified if you have the space, versus lower and lower clearance stoves these days actually being able to get installed as advertised. I'm just speaking as a guy who's going through the certification programs and has installed a number of stoves. I still have a lot to learn and I'm not here to chew anyone out 😂..
Did I miss something? The title of this video is "The Woodstove Power Companies Fear". I saw the woodstove install and heard talk of the New Year's Gathering but I did not hear much about the woodstove power companies fear. Did I miss that info?
They make "radiator" style wood stove fans that are magnetic, powered only by the heat and stick to the stove, then automatically start circulating the heat once it reaches a certain temperature.
@@daytonafuntim those are just a novelty. They don't have the power to circulate the air significantly to make a difference or warrant the cost. They make a great father's day gift. That about it.
I showed that to my cousin...an ex Fire Chief over there and he said 'Did you not say that guy was some sort of a fireman at some point ? ' I replied..' he seems to have been everything at some point'
in Himalayas, where life DEPENDS on stoves, they setup the stove in the middle of the room. cooking occurs on it. it radiates heat in all directions. they also sleep around it. all around it.
Hi just some words of safety from a UK registered competent solid fuel installer. 1 : Get a heat shield behind that stove with a ½” air gap from the wall. 6” wider (each side) and taller than the stove The heat from that stove will char you wood paneling! Metal or other non combustible material. leave a small air gap along the bottom edge. 2 : Use some vermiculite board to box in the flue pipe where it passes through the roof sandwiched between the flashing and your ( now two piece ) roof trim! with a clear space between the boxing in and the twin wall. In the UK twin wall has a G rateing that being the last numbers stating the closest it can be to combustible material. i.e. G50 = no closer than 50mm (yes the EU strikes again!) to anything that burns.
We have the same exact stove in our Sierra Nevada home. Very minimal clearances are required so Cody's is placed perfectly. I'd recommend opening the cc bypass when the stove door is open to stop the smoke from pouring out. I believe this is recommended in the manual also.
We just bought a home with a hearthstone h1 wood stove dead center of the house, such a wonderful heat! never has the ol lady wanted the house above 68 but this stove gets the house up to about 77. I usually only have to have one fire in the morning and once at night and it keeps us nice and toasty. we live in central NY. when we were waiting to move into our new home back in September I rediscovered your channel. I used to watch you way back when you first started and just lost track but your Stihl chainsaw videos popped up when I was researching chainsaws. I went with a Stihl because of you actually. I'm actually working on getting the garages to be able to work on my own projects and in the meantime, I have been sick with covid and taking care of our newborn lucy. these videos have been very entertaining during these past 2 weeks I appreciate what you do. happy heating and happy new year!
@@sociopathmercenary its not that warm in the bedrooms but its surprising comfortable, the soapstone stove really does heat everything in the house like the walls and furniture vs just the boom in your face hot air i have felt from steel wood stoves. I didn't believe it when I was watching videos on them but after a couple hours of being lit u can just feel it warm u to the core not just blast u with hot air.
I love wood heat in some circumstances, but I sure am tired of using it for the primary heat source in my ancient, non-insulated house. My body isn't up to splitting and hauling that much wood on an annual basis anymore.
Glad you use the harness! But I couldn’t help think about the men who built the skyscrapers in New York City in the 20s and 30s, hundreds of feet in the air with no harness walking across the beams lol what do you think they think about us today Using a harness for a 30ft job!
Greetings. What differentiates this wood stove from the others so much that power companies don't want you to know about it? I didn't hear you talk about that. Thanks !!!
Just because I'm a newbie when it comes to wood stoves. Do you need or is it required due to regs to put a metal flashing of some type between the stove and the wood slats behind it? Thanks for the vid. Have a Happy New Year.
When I built my house, I built an amazing hearth and put a top of the line efficient wood stove in to compliment my heat pump. During winter a single armload of wood burns all night, heats the concrete foundation and still keeps it warm waking up in the morning. Best decision ever!
Look at his previous video the woodstove utility companies fears. He clearly shows the stove has a heat sheild already attached etc plus clearances required.
You’re a good dad. Jack is very fortunate to have a dad like you that teaches him the skills that is needed as a man. I learned through my military time, but I can tell you are a very loving, caring and thoughtful parent. God bless you and your family.
Working in shops and warehouse for over a decade now. And for larger shops/warehouses with tall ceilings it’s always been beneficial to have a large industrial ceiling fan. Something to consider 🤷🏼♂️
Great choice on the wood stove. Propane is fast to heat, fast to turn off(some phases of projects you do NOT want sources of ignition around), and hassle free. It also has zero soul or ritual, and the vent-free ones are very damp. Signed, a guy who went with propane to heat his shop and regrets it.
Good for safety and might have something to due with clearance to combustibles. Was wondering if I'd want all the gas powered vehicles in there if there was a gas leak.
We have two Woodburners, a simple one for the living room and a woodburning range in the kitchen, it has a back boiler which is piped to 9 large radiators, with an inline 25watt water pump, if the range is kept stoked up, the radiators can get almost too hot to touch, plus the large hotplate on top & a very large oven which works very well, wouldn't be without them
looks nice! But I'm concerned its a bit undersized for the shop. I can still see your breath after its been going for a few hours. I do like the idea of soapstone instead of firebrick though!
Awesome how you have your children involved in every way, this is what is lacking in the world today and we wonder what is going wrong. My father taught me to be a man and how to be self sufficient in every way and I passed it on to my son. God bless you and your family.
You need something to catch the heat in the stovepipe. In my shop heater, I have 2 55 gallon drums in the center of the pipe that hold the heat well, put a fan blowing over them and it get nice and toasty.
@@wranglerstar Your stove manual more than likely states 18” clearance to combustibles for the stove. Your pine board wall could start to chat or spontaneously combust.
Have a great 2021 Wranglerstar family. Maybe you could put one of those fans on top of the woodstove that are thermally powered to move some of that heat coming off of the stove around the shop?
I’ve been following your channel for awhile now, I’m a truck driver from Ontario, Canada. I love the content! Love the shop and what you’re doing with it!
I also use a soap stone woodstove to heat my home here in Canada. It is the Heritage model and have used it for about 9 years. It is different than a steel stove in that it takes longer to heat up and you shouldn't get the temperature too hot, but I wouldn't trade it. We find it provides such an even comfortable warmth that lasts. Take care and Happy New Year.
I think that stainless piece may be a shelf that hangs on the outside. The fire really looks nice through the glass. We heated with wood for over 13 years in NH and we had a Jotul woodstove. It burned the wood like a cigar from the front to the back and we loved it. Our home was passive solar and we had window quilts on all windows including the slider. When it was windy, the quilt over the slider would get sucked right up against it. When sunny, the sun heated the entire house with the quilts up and then when you lowered them down, you could feel the heat of the house increase. That's how air tight they were. We also had our stove inside a brick enclosure and we stored wood in the compartment to the left of the stove. There was a brick wall separating that storage compartment from the woodstove compartment. I built a wooden divider in the storage compartment so we burned the wood on one side of the divider per week and our wood was always dry because it had a week to dry. We only had one issue with an ant nest in a piece of wood so when that wood heated up, a ton of ants woke up and were crawling all over. No fun that day. Our walls in that house were 1 foot thick. We only burned just over 1 full cord of wood per winter in NH. John from MI
I'm thinking, with the MASSIVE space in that garage, he's going to need ALL the heat that stove can put out, including anything the insulated pipe would give off. Its a nice area of refuge to get warmed up, and it will be better in the Fall or Spring, but in the Winter it'll be like lighting a candle in a gymnasium.
@bad company Every turn in the chimney (two 90° turns in your scenario) lessens the efficiency of the chimney. Straight up works best. But, always, when you cut a hole in your roof, you set yourself up for leaking problems in the future. For sure, for sure.
@@barbaragift3230 there is no code saying 32". Unlisted stoves are 36". But this is a listed stove with a heat shield and testing that says it can be far closer
I’m in Maine with my Vermont Castings Intrepid blazing right now. That seems like a nice unit, great job and you made the right choice for sure. Happy New Year 😊
Is there a previous video for the planning, clearances, chimney pipe, and (always possible) home inspection compliance? A week ago! I'll check that out. Looks great!
Stupid question. Why spend so much money on double wall pipe when the whole point of a woodstove is to put as much heat into a room as possible. I understand using double wall at the point you go thru the wall, don't want to cause a fire, but from the stove to the wall why not use single wall pipe so the pipe itself will send off lots of heat?
i wonder the same thing, i have a single walled pipe with a thermometer on it and its always around 300 sometimes way higher, the pipe puts off just as much heat as the stove, im guessing its a safety thing
@@gypsyxxx and music, id assume that he wants to keep a high draft in the stove and if the pipe is letting out to much heat it can cool the smoke and stop the movement of smoke. the pipe well hold more of its heat with the double pipe keeping a better draft. Im no pro nor have i installed alot of fire places so i cant say for sure.
To prevent creosote. A long run of single wall pipe like that would cool the exhaust gasses pretty substantially and there would be a significant risk of creosote build up.
I like that you and Jack can now ride together and spend more time together, I know you both will treasure those days something you can never get back as you know
I seem to remember that the stove expert recommended that you place your stove higher off the floor in the event that you had a propane leak, to prevent an ignition of the gas that settles along the floor. Did I miss an installment of the Professional Homeowner where this was discussed? By the way, I REALLY appreciate that you are sharing all of your projects with us, and you reaffirm that a Christian man takes care of his family!
A recirculating fan hanging from the ceiling will push all the hot air back down. We used them in our gymnasium add they worked great. Reuses all that wasted heat. Happy New Year.
More like pulling it out to at least 18-20" which is what I would imagine is closer to code ..this kind of video should be pulled down.. you do that in your house or garage, and it burns down, your insurance company will just say "Best of luck in your future"
@@stephenmccarthy3553 Aside from the fact that it's physically impossible for you ascertain how many stoves I have or haven't installed, it doesn't help that you're utterly incorrect about the stove being too close lol. If you're going to pretend to be an expert at least don't embarrass yourself.
Really appreciate the content! Question though, I remember you digging a well and installing the that nice pump at the old homestead, what happened with that? Any plans to do it again?
Perhaps you should "Google" search for the directions for your stove. That one piece you showed, the metal one appears to be a reflector of some kind. Beautiful stove. Enjoyed the video.
Suggestion for a project would be a nice wood box (maybe even wrapped in copper sheet or sheet metal so you can keep it close by. Another suggestion would be to keep your wood stack on the other side to keep from having to reach around the stove door. While it’s open. That will get old real quick, it did with mine. Happy New year
your installation would be illegal in Australia. why you ask? because of the bare timber behind it, too close according to Australia's nanny state laws. It would be fine if it was clad with cement board or tiled
I WOULD INSTALL A CEILING FAN ABOVE THE STOVE, QUIET, TAKES ALL THE HEAT OFF OF THE CEILING AND PUTS IT WHERE YOU ARE, I HAVE DONE THIS TO MY TALL CEILING AND IT WORKS LIKE A CHARM.
My grand daughter is being born tonight, love you all.
Kings to you!
Congratulations!
Let the zombies reproduce
@@burfgiblet thank you
How is your grand daughter?
Lucky!
@@burfgiblet she's doing amazing for being 1 month early. She eats and sleeps a lot right now. Thank you for asking
If you don't already have one, you should install a large ceiling fan to distribute that hot air that will accumulate at the top of that shed. Place a thermometer up near the ceiling after the fire has been burning for a few hours. There will be a big difference in temperature between the ceiling and the floor. Heat rises.
We have a similar model. If you pull that catalytic converter handle forward before you open the door you don’t get that puff of smoke out the front of the door.
I have a similar model on order (mansfield) with the cat. When I saw that puff of smoke out the door I thought.... NOOOO, I hope my new stove doesn't do that!!! I started looking through the comments to see if anyone else noticed. Very happy to have come across your recommendation! I'm assuming that pulling the handle forward opens the bypass for the cat, so the draft should be stronger and pull the smoke up the chimney when the door is opened.
@@mdocod yes it bypasses the "catalytic converter" system. We also pull the lever forward when you first start the fire. It helps the air flow and lets the fire grow then you close the lever and it reburns the unburnt fuel left in the smoke. You see very little smoke color if any out of the chimney when that system is working.
Make sure you roll the flap on the shed roof back before you cut the hole for the chimney!
when cutting a hole in an angle roof - shine a light from inside the pipe and trace the outline on the roof
When you open a stove with a fire in it open it just a crack to allow the chimney to draw the air in before you open the door wide.
Do you have a ceiling fan in the shop there great to move the heat down from that tall ceiling
There is nothing like having leftover parts to make you feel like you fucked up.
I really like seeing Jack's progression as a son, I can relate to it a lot myself. I was raised by my Grandparents. The older I got, the more and more I wanted to connect with my Grandpa and learn from him. Unfortunately he got sick and died very quickly, if I had one wish in life it would be to go back up into the mountains or go fishing again with my Grandpa.
I am a grandpa to 17 beautiful grandkids. I only pray they feel the same about our time together. Thanks.
@@cavetteaton you know you have the luxury of wisdom something they do not. You need to be proactive a make situations where they are forced to spend time with you and don't even realize it. Like a water ski trip or something. Motorcycles in the desert or rock crawling. Then you can tell all your cheesy stories. When you're gone they will reminence and recant your stories talking about how cool you were
I live in Connecticut, and a wood stove is my only heat for the past 17 years. The power co. don't care about wood stoves. Most people don't want to do the work to use wood. I cut and split all the wood that I use. Even for the person who buys there wood precut and split, don't want to do the work. Stacking, bringing in the house, feeding the stove. On the very cold nights (10 below or colder) you have to feed the stone all night. Cleaning out the stove every few days. Dealing with the ash. Bugs from the wood piles in the house.
You hit the nail on the head, right on.
Also do you need some flashing behind the stove to keep the wall from burning?
Yes he does. Most wood stoves require non combustible material behind them or 18” of clearance to combustibles, from memory.
For all the to close to the wall questions, that stove requires only 8” to a combustible at the rear
I was wondering about that. My insurance requires 2ft from the wall.
My blaze king has 0" clearance requirements. We love it 88% efficiency.
Oftentimes local building codes give a specific offset, but many of those also bow to any manufacturer recommendations.
So ever stove has different requirements. As a fireplace technician always follow the manufacturer's installation! Unless told different by your local inspector.
@@tonyfesta3773 yes, manufacturers specifications are always to be followed. I am curious about what kind of pipe it is. The unregulated status of stove pipe is also a recommendation to be followed by the manufacturer of said pipe... But I have not seen any pipe that nears the back of the heater that would allow unprotected clearance of what this stove appears to be placed in. People get awful upset when you pose a question and they don't really know the answer 🙂 and as stated above, Insurance can also jump in there and say whatever they want. Installation of a completely uncertified unit is 4 ft away from everything in the room with particular allowances for thermal protection underneath the unit as well. It's amazing what can be certified if you have the space, versus lower and lower clearance stoves these days actually being able to get installed as advertised. I'm just speaking as a guy who's going through the certification programs and has installed a number of stoves. I still have a lot to learn and I'm not here to chew anyone out 😂..
That settles it! I'm getting a woodstove for the shop, as soon as the house projects are done and the budget allows.
Did I miss something? The title of this video is "The Woodstove Power Companies Fear". I saw the woodstove install and heard talk of the New Year's Gathering but I did not hear much about the woodstove power companies fear. Did I miss that info?
Just a little blurb about how wood is quieter and nicer compared to a furnace.
NO assembly job is complete unless you have a hand full of spare parts and hardware after you're done. It's in the Geneva Convention.
A heat powered fan on the top of the wood stove would help circulate heat around the shop.
A commercial ceiling fan would be even better and would also help in the summer
They make "radiator" style wood stove fans that are magnetic, powered only by the heat and stick to the stove, then automatically start circulating the heat once it reaches a certain temperature.
@@daytonafuntim those are just a novelty. They don't have the power to circulate the air significantly to make a difference or warrant the cost. They make a great father's day gift. That about it.
I showed that to my cousin...an ex Fire Chief over there and he said 'Did you not say that guy was some sort of a fireman at some point ? '
I replied..' he seems to have been everything at some point'
in Himalayas, where life DEPENDS on stoves, they setup the stove in the middle of the room. cooking occurs on it. it radiates heat in all directions. they also sleep around it. all around it.
Love that
“The most professional of ALL the professional homeowners”..... Jack 2020
Hi just some words of safety from a UK registered competent solid fuel installer.
1 : Get a heat shield behind that stove with a ½” air gap from the wall. 6” wider (each side) and taller than the stove The heat from that stove will char you wood paneling! Metal or other non combustible material.
leave a small air gap along the bottom edge.
2 : Use some vermiculite board to box in the flue pipe where it passes through the roof sandwiched between the flashing and your ( now two piece ) roof trim! with a clear space between the boxing in and the twin wall. In the UK twin wall has a G rateing that being the last numbers stating the closest it can be to combustible material. i.e. G50 = no closer than 50mm (yes the EU strikes again!) to anything that burns.
We have the same exact stove in our Sierra Nevada home. Very minimal clearances are required so Cody's is placed perfectly. I'd recommend opening the cc bypass when the stove door is open to stop the smoke from pouring out. I believe this is recommended in the manual also.
We just bought a home with a hearthstone h1 wood stove dead center of the house, such a wonderful heat! never has the ol lady wanted the house above 68 but this stove gets the house up to about 77. I usually only have to have one fire in the morning and once at night and it keeps us nice and toasty. we live in central NY. when we were waiting to move into our new home back in September I rediscovered your channel. I used to watch you way back when you first started and just lost track but your Stihl chainsaw videos popped up when I was researching chainsaws. I went with a Stihl because of you actually. I'm actually working on getting the garages to be able to work on my own projects and in the meantime, I have been sick with covid and taking care of our newborn lucy. these videos have been very entertaining during these past 2 weeks I appreciate what you do. happy heating and happy new year!
77 degrees! I'd need rubber sheets and a drain in the mattress but I bet I'd lose a couple pounds a night.
@@sociopathmercenary its not that warm in the bedrooms but its surprising comfortable, the soapstone stove really does heat everything in the house like the walls and furniture vs just the boom in your face hot air i have felt from steel wood stoves. I didn't believe it when I was watching videos on them but after a couple hours of being lit u can just feel it warm u to the core not just blast u with hot air.
I love wood heat in some circumstances, but I sure am tired of using it for the primary heat source in my ancient, non-insulated house. My body isn't up to splitting and hauling that much wood on an annual basis anymore.
Glad you use the harness!
But I couldn’t help think about the men who built the skyscrapers in New York City in the 20s and 30s, hundreds of feet in the air with no harness walking across the beams lol
what do you think they think about us today Using a harness for a 30ft job!
Greetings. What differentiates this wood stove from the others so much that power companies don't want you to know about it? I didn't hear you talk about that. Thanks !!!
Idk, I bought one. Not impressed. My 30 year-old stove out performs it and based on what I see coming out of the pipe, dirtier too.
Any plans to put a sheet of metal on the back wall to help reflect more heat out?
No need for metal over the wood wall, it will reflect plenty of heat when it catches fire!
Just because I'm a newbie when it comes to wood stoves. Do you need or is it required due to regs to put a metal flashing of some type between the stove and the wood slats behind it?
Thanks for the vid. Have a Happy New Year.
There’s nothing better than wood stove heat! God bless your family in the new year!
When I built my house, I built an amazing hearth and put a top of the line efficient wood stove in to compliment my heat pump. During winter a single armload of wood burns all night, heats the concrete foundation and still keeps it warm waking up in the morning. Best decision ever!
Do you need a barrier between the stove n the wood wall planks?
Look at his previous video the woodstove utility companies fears. He clearly shows the stove has a heat sheild already attached etc plus clearances required.
Did you find where the 2 leftover parts go ?
You need one of those passive fans on top of the stove. Works wonders. Tip from Sweden.
I was looking for this comment, "Magic Heat" is what I've seen on them, in Michigan, they are popular.
You should make a professional homeowner patch for a plate carrier or helmet
You’re a good dad. Jack is very fortunate to have a dad like you that teaches him the skills that is needed as a man. I learned through my military time, but I can tell you are a very loving, caring and thoughtful parent. God bless you and your family.
Good to hear you keeping up the distinctions between men and women! Not many people ‘bold’ enough to do that these days!
Hi John, as Cody says in the video, if you think that physical strength is the only difference, then you need to spend some more time with women!
I’m also a Christian and conservative. I don’t really know what point you’re trying to make.
A wood fire is practically built into our psyche. Very comforting.
Working in shops and warehouse for over a decade now. And for larger shops/warehouses with tall ceilings it’s always been beneficial to have a large industrial ceiling fan. Something to consider 🤷🏼♂️
Seems like you've been having a lot of fun with Jack. That's cool
The memories you are creating are priceless Cody! My son passed awhile back at 8 years old. I know you and Mrs. W feel so blessed!
So, what was the temp in the tent after burning in it?
I'm sure you thought of it .. But a 5mm steel back plate behind that stove would radiate seatback into the shop.
What a wonderful addition to the shop. It looks very inviting to hang out with family and friends ;)
Maybe put a couple coat hooks and such near the backside wall there? Perfect spot to hang a coat or gear to dry off :)
You should buy a heatpowerd fan works great and makes a Hugh diffrent, its spreads the heat better
Great choice on the wood stove. Propane is fast to heat, fast to turn off(some phases of projects you do NOT want sources of ignition around), and hassle free. It also has zero soul or ritual, and the vent-free ones are very damp.
Signed, a guy who went with propane to heat his shop and regrets it.
Looks great. I find the heat circulates a little better when you add a eco fan. Great little device.
Why the double stainless steel (insulated) pipe? at 1:38.. A single stove pipe would transfer more heat into the shop.
Good for safety and might have something to due with clearance to combustibles. Was wondering if I'd want all the gas powered vehicles in there if there was a gas leak.
Its to close to the wall and will last forever and need less cleaning
We have two Woodburners, a simple one for the living room and a woodburning range in the kitchen, it has a back boiler which is piped to 9 large radiators, with an inline 25watt water pump, if the range is kept stoked up, the radiators can get almost too hot to touch, plus the large hotplate on top & a very large oven which works very well, wouldn't be without them
looks nice! But I'm concerned its a bit undersized for the shop. I can still see your breath after its been going for a few hours. I do like the idea of soapstone instead of firebrick though!
Nice stove. I'd put a thermal fan or two on top to distribute warm air around the shop.
Awesome how you have your children involved in every way, this is what is lacking in the world today and we wonder what is going wrong. My father taught me to be a man and how to be self sufficient in every way and I passed it on to my son. God bless you and your family.
Him and Scotty Kilmer would be the perfect team up to make fun of Chinese products
Halfway through and really enjoying Jack’s presence in the vid. Watching since you were a little guy Jack!!
@@keithcronk7980 the stream will get caught him
Careful with that. I know a guy who set fire to his shed wall with a wood stove. Luckily he was inside and was able to extinguish it.
HELLO from las Vegas Nevada, thank you for the video and Happy new year, GOD BLESS YOU AND YOUR FAMILY.
Why do power companies hate this stove???? Also where did those two last pieces go???
Love absolutely love wood 🪵 stoves 🔥
I am curious about that too, never really talked about that did he?
@@dennismack9335he did not and I am super curious 🧐
Hopefully he covers it or explains it in the next up load...???
Always good to see you. The placement seems perfect, really upgrades the ambiance of the shop. Happy New Year, let's hope it's a good one. Thanks.
... is worried that a hose could burst and lose pressure, but is fine with no brakes.
You need something to catch the heat in the stovepipe. In my shop heater, I have 2 55 gallon drums in the center of the pipe that hold the heat well, put a fan blowing over them and it get nice and toasty.
The liner is a good thing but I’d still line the wall too. I’ve seen too many houses catch fire even with brick on the wall not to line it as well.
There is no need, pipe doesn't get hot,
@@wranglerstar
Your stove manual more than likely states 18” clearance to combustibles for the stove. Your pine board wall could start to chat or spontaneously combust.
Nope, it states 8"
Don’t you need shielding between the stove and the wood wall ?
Just curious, how come you didn’t put some bricks under the legs to raise it up for easier loading??
Because I'm not East Coast guy,
Would LOVE an update on this stove in general. Catalyst holding up? I have one on order and curious about real life use.
Why is the stove causing the power companies to worry
Have a great 2021 Wranglerstar family. Maybe you could put one of those fans on top of the woodstove that are thermally powered to move some of that heat coming off of the stove around the shop?
I install these daily, there are instructions to install all of the refractory panels online. That stainless steel metal piece is your baffle cover
Someone didn't read or lookup his instructions.😂
Wow, all new levels of clickbaity title.
Thanks for the warning, I’m leaving now. I appreciate it
It's a west coast thing.
He's good at that. More views more money . West coaster
Not every democrat is a horse thief, but every horse thief if a democrat
Thank for that cause you can't get wasted time back
I watch this as my socks are drying next to our stove. Love it!
I’ve been following your channel for awhile now, I’m a truck driver from Ontario, Canada. I love the content! Love the shop and what you’re doing with it!
You need to open the catalytic bypass damper this will stop the smoking No heat shields!? it would be nice to mention the brand and model
I also use a soap stone woodstove to heat my home here in Canada. It is the Heritage model and have used it for about 9 years. It is different than a steel stove in that it takes longer to heat up and you shouldn't get the temperature too hot, but I wouldn't trade it. We find it provides such an even comfortable warmth that lasts. Take care and Happy New Year.
That stove must have a really good heat shield to place it that close to the wall. With wood paneling to boot.
Yupp, 4 inches.
I think that stainless piece may be a shelf that hangs on the outside. The fire really looks nice through the glass. We heated with wood for over 13 years in NH and we had a Jotul woodstove. It burned the wood like a cigar from the front to the back and we loved it. Our home was passive solar and we had window quilts on all windows including the slider. When it was windy, the quilt over the slider would get sucked right up against it. When sunny, the sun heated the entire house with the quilts up and then when you lowered them down, you could feel the heat of the house increase. That's how air tight they were. We also had our stove inside a brick enclosure and we stored wood in the compartment to the left of the stove. There was a brick wall separating that storage compartment from the woodstove compartment. I built a wooden divider in the storage compartment so we burned the wood on one side of the divider per week and our wood was always dry because it had a week to dry. We only had one issue with an ant nest in a piece of wood so when that wood heated up, a ton of ants woke up and were crawling all over. No fun that day. Our walls in that house were 1 foot thick. We only burned just over 1 full cord of wood per winter in NH. John from MI
Wow I've watched your videos for year's Jack was just a little kid now he's a young man you must be a proud father thank's for sharing.
Just curious, did you consider turning a 90 out the side wall with a clean-out outside and then straight up?
I'm thinking, with the MASSIVE space in that garage, he's going to need ALL the heat that stove can put out, including anything the insulated pipe would give off. Its a nice area of refuge to get warmed up, and it will be better in the Fall or Spring, but in the Winter it'll be like lighting a candle in a gymnasium.
@bad company Every turn in the chimney (two 90° turns in your scenario) lessens the efficiency of the chimney. Straight up works best. But, always, when you cut a hole in your roof, you set yourself up for leaking problems in the future. For sure, for sure.
You should have a heat shield on the wall behind the wood stove.
Stove too close to wall. 32" is safe and code. Ive been burning wood only for 15 years.
@bill hill Cody has shown us that there IS a heat shield. But, rather than attached to the wall, it is attached to the back of the stove.
@@dalebannon8503 sorry, didn't know
@@barbaragift3230 there is no code saying 32". Unlisted stoves are 36". But this is a listed stove with a heat shield and testing that says it can be far closer
Add a couple of ceiling fans. Circulate the hot air from up high to the ground. By the way just started a fire in my stove. Good choice.
You should get one of those heat powered stow fan's on that stow to direct some heat to where you are working.
Have you considered putting some heat protection behind the stove on the wood wall?
Yes I will admit starting a fire in the shop in the mornings is a ritual that is very satisfying
Awesome! Are we ever going to get a full house tour? And do you have a stove in the house? Or an actual fireplace?
Don’t worry I’m a professional insulator and they took the itch out of fiberglass years ago
It's about time
Mmmmm, no.
Ha ha.
I itch thinking about it
Only out of the cheep fiberglass to cut costs!
will you be adding an offset aluminum or stainless plate to protect the wood behind it?
Stone would be better, IMO.
I’m in Maine with my Vermont Castings Intrepid blazing right now. That seems like a nice unit, great job and you made the right choice for sure. Happy New Year 😊
Is there a previous video for the planning, clearances, chimney pipe, and (always possible) home inspection compliance? A week ago! I'll check that out. Looks great!
Stupid question.
Why spend so much money on double wall pipe when the whole point of a woodstove is to put as much heat into a room as possible.
I understand using double wall at the point you go thru the wall, don't want to cause a fire, but from the stove to the wall why not use single wall pipe so the pipe itself will send off lots of heat?
i wonder the same thing, i have a single walled pipe with a thermometer on it and its always around 300 sometimes way higher, the pipe puts off just as much heat as the stove, im guessing its a safety thing
@@gypsyxxx and music, id assume that he wants to keep a high draft in the stove and if the pipe is letting out to much heat it can cool the smoke and stop the movement of smoke. the pipe well hold more of its heat with the double pipe keeping a better draft. Im no pro nor have i installed alot of fire places so i cant say for sure.
To prevent creosote. A long run of single wall pipe like that would cool the exhaust gasses pretty substantially and there would be a significant risk of creosote build up.
@@peeonthe3rdrail414 I don't know what you said to be fact, but it sounds good!
@@banjoeypicks uhh, thanks I guess.
I like that you and Jack can now ride together and spend more time together, I know you both will treasure those days something you can never get back as you know
Thought you said that was an all steel stove on your other video? Nice stove. Nice shop. Nice family! Happy New year mister!
I can’t believe how jack is growing up I’ve been watching for 7 years and didn’t realize it. I find your videos very comforting keep it up
I seem to remember that the stove expert recommended that you place your stove higher off the floor in the event that you had a propane leak, to prevent an ignition of the gas that settles along the floor. Did I miss an installment of the Professional Homeowner where this was discussed? By the way, I REALLY appreciate that you are sharing all of your projects with us, and you reaffirm that a Christian man takes care of his family!
A recirculating fan hanging from the ceiling will push all the hot air back down. We used them in our gymnasium add they worked great. Reuses all that wasted heat. Happy New Year.
A fan blowing straight up from the floor accomplishes the same thing. It mixes the cold floor air with the hot air up above.
Think I would be installing firebrick on that wall.
I always found it funny when people think a fireman installed a fire burning appliance wantonly.
More like pulling it out to at least 18-20" which is what I would imagine is closer to code ..this kind of video should be pulled down.. you do that in your house or garage, and it burns down, your insurance company will just say
"Best of luck in your future"
Right because you're a code officer and an insurance agent, I'm sure.
@@mustardhorse4898 I'm sure I've installed 100% more stoves and chimneys than you.
@@stephenmccarthy3553 Aside from the fact that it's physically impossible for you ascertain how many stoves I have or haven't installed, it doesn't help that you're utterly incorrect about the stove being too close lol. If you're going to pretend to be an expert at least don't embarrass yourself.
Can you switch the hinge side of the door? It looks like that would be better for your set up.
Whatever happened to the double barrel stove with heat exchanger?
Power companies feared that stove too.
I liked that stove build.
@@xmachine7003 I liked it too, but never saw the end result.
Really appreciate the content! Question though, I remember you digging a well and installing the that nice pump at the old homestead, what happened with that? Any plans to do it again?
Perhaps you should "Google" search for the directions for your stove. That one piece you showed, the metal one appears to be a reflector of some kind. Beautiful stove. Enjoyed the video.
Cody isn't going to use the interwebs... He said he was going to call the factory. 😁
Suggestion for a project would be a nice wood box (maybe even wrapped in copper sheet or sheet metal so you can keep it close by.
Another suggestion would be to keep your wood stack on the other side to keep from having to reach around the stove door. While it’s open. That will get old real quick, it did with mine.
Happy New year
your installation would be illegal in Australia. why you ask? because of the bare timber behind it, too close according to Australia's nanny state laws. It would be fine if it was clad with cement board or tiled
That stove has just an 8” clearance to combustibles to the rear
These are the type of videos that got me to subscribe so many years ago. Glad to see them come back.