HTML-код
- Опубликовано: 4 окт 2024
- My website
www.easeldoesitstudio.com
My Email
michellemcdaniel15@yahoo.com
Buy me a coffee
www.venmo.com/...
Amazon wishlist
www.amazon.com...
-------------------
Products used
Into resin handmade butterfly box
www.intoresin....
resin-mold
Handmade turtle mold
www.intoresin....
Resin Rockers mystery box
resinrockers.c...
Turtle mold
a.co/d/392J2uq
Amazon mystery bags
a.co/d/7n1i1Ng
Bowl mold
a.co/d/13wiegE
Rose stickers
a.co/d/5Rp7PFT
Moon mold
a.co/d/14MAOpL
3 pack of molds
a.co/d/9DaGdJd
mold
a.co/d/0Ske4hr
Pumpkins molds
www.beebeecraf...
Clock mold
a.co/d/0f6m1amM
Bunny mold
a.co/d/0fRK97jp
Marabou alcohol glitter
a.co/d/0906XZbE
Non sink aurora mica powder
www.intoresin....
Non sink glitter
www.intoresin....
Handmade shell mold
www.intoresin....
------------------
Let’s resin Amazon links
Casting Powder: amzn.to/3XddOet
Polyurethane resin: amzn.to/4dAwfzA
Liquid rubber to make squishy
amzn.to/3MzMEYX
------------------
If you would like to be an affiliate use this link
affiliate.into...
www.intoresin....
20% off coupon code
MICHELLEMCDANIE
------------------
RUclips program for Beebeecraft
www.beebeecraf...
Beebeecraft website
www.beebeecraf...?
s=McDaniel
Save 10% when you use👇
Coupon code McDaniel10
------------------
Resin rockers website
resinrockers.c...
Discount code for 10% off
EASEL
------------------
Happy mail
29 Summit Drive
North Waterboro, Maine 04061
For a piece so intricate I would pour and wait at minimum 12 hours but preferably 24. Water that you mix in doesn't vanish in an hour or 2, it can take days and the shorter the time span to demold, makes the piece more venerable to damage. Have you tried pouring it in resin? It could very well work out nicely. Please don't throw the mold away till you have tried other ways and even then, just cut the silicone apart and stick it into a bag to use with a fresh silicone mold down the line. Good luck :)
I would try to salvage what you can to keep for yourself. Maybe paint it and give it an antique look so the missing areas look like it it something that has been around for years in honor of the myth of the dragon for hundreds of years. Ya know, just give it a backstory and it'll be a great conversation piece 😊
Never throw out any silicone can always just cut up and save to use in other mold your making.
I like the orange and brown marble effect
Oh man Michelle, I am so sorry about this😢 I’d be ticked off too, but you gave it a go! I would try to glue the heads on the one and use it for yourself like you said😊 Have a good night!!
I've just had my cross mould delivered so I'm m dying to see what you do with them. 😊
Don't throw the mold out cut it into pieces and use as fill in another mold. Also when casting anything you are unsure of do a water test if it absorbs water it has a hole somewhere on the casting
Thank you. That’s good to know I wish I had known that sooner
Gutted for you. 😧 That looks great though. Can the heads not be glued? Painted over with a thick paint. 🤷🏼♀️ I don't know, I'm not an artist, or experienced with moulds/mould making. I do love the dragon. Give him/them a sparkly collar. 😁👍 Keep the mould to chop up into small bits for future mould making. ❤
My heart goes out to you Darl… I too, have had expensive mishaps, and it can be so frustrating! But I also know that you will rise above… soon as you’ve had time to blow off some steam!!
You’ve had quite a few suggestions here, and I’m sure that I’m not the only one keen to find out what you decided.
Lotsa luv, Nat. ♥️♥️🇦🇺
Before u cut up or throw the mould out, try cutting off some of the outer side of the mould around the heads so the mould is much thinner, that way the mould will release alot easier. Just leave ½cm to 2cm of silicone thickness around the heads, rather than the 5 or 6 cm that you've got. It's worked for me when I've had the same problem.
It's certainly worth a go.
Glue it and keep it for yourself 😊
That’s what I’m going to do
The mats and cross mold is from me
Thank you so much. I was so excited it made my day.
Your very welcome I don’t know why I didn’t but a note in there brain fart i guess
I've use UV resin ti fix mix 2 mold and you can make horns. Or E 6000 might work. Don't give up on it!
Not sure that I should hit the like button as I like the try but not so much your disappointment. 😢 .Keep the mold. I have faith that you will come up with a way to figure it out.
@@Sandi-om2tm I’m not sure that Michelle deserves to lose a like… yes, she was very disappointed, and she didn’t hide the fact… but, she believed at the time that she had just wasted $150… I know I’d be peeved about that!! She obviously didn’t plan to just dump it, as she asked us viewers what we would do… so she planned on seeing if any of us could offer suggestions… which you did, as well as many others.
Much love from Nat. (Brisbane, Australia) ♥️♥️🇦🇺
@@mattersofthehartbynat8815 I knew someone had to take that the wrong way!
@@Sandi-om2tm Please, tell me if there was another way to take it? ♥️♥️🇦🇺
I laugh with you all the time with your messes and fails. But only because you and I are so much alike its not even funny. I even managed to resin my underwear to my stomach after knocking something over onto myself. I thought I had cleaned it up until I went to bed and tried to get my underwear off and it was stuck to me. So don't worry you are definitely not alone in your clumsyness. I also broke and old fashioned candle stick the type that little Tommy Tippy went through the town with because I poured a mold my first ever and it took a lot too. Then when I tried to get it out it wouldn't come out because the silicone went through the handle had to cut it through and snapped the handle into 3 pieces I was gutted because it belongs to my mum.