A big tip for cartridge holder is to print it vertically on its side (ie "tallways") 👍 (source: I designed the thing to be printed this way because I hate supports 😜, and most medium sized printers should be able to handle ~130mm height)
Life hack: if you lick the game cartridge for your switch game and dry it off the game will detect that you did and you will have access to do anything (fly, spawn weapons, walk through walls, etc.)
Lets go in order 1. Locking case: Stupid, really, really stupid 2. Blue steering wheel: Pretty cool 3. Game holder: Useful & I want one 4. Joy-con/Drink holder: pretty stupid and an accident waiting to happen 5. N 64 controller: I like it but I wish it was easier to use the L/R buttons 6. Green adjustable switch holder: useful, I want one for my bathroom 7. Purple switch holder/controller grip: I want one, small joy-cons suck 8. red & white case: neat but not really a switch accessory 9. Red/Blue switch & game case: really cool, useful for traveling 10. one-handed joy-con holder: Stupid and looks uncomfortable Thank you for coming to my ted talk.
@@ViiperDesigns98 Lets go in order on the assumption that you only have 1 hand then 1. Number of hands doesn't matter 2. Impossible to reach other side of controller while holding wheel 3. Number of hands doesn't matter 4. Impossible to reach other side of controller thanks to large cup and still likely to spill drink 5. Still wish L/R was easier to reach and less hands make it harder to use since 3 handles now get in the way 6. Number of hands doesn't matter 7. Gives better grip and more stability, useful even with less hands 8. Number of hands doesn't matter 9. Number of hands doesn't matter 10. Useful for 1 hand, still looks uncomfortable 2 out of 10 help if you have 1 hand and 1 of those helps regardless of hands. Your point if stupid and this was a waste of my time on an 8 month old comment. Thank you for coming back to my ted talk. Please leave all complaint with my 3 handed assistant.
9:30 I Like this because if someone only has one arm, or maybe doesn't have fingers or trouble with an arm in general, they can still play Mario kart in this cool way
You should really market and put out the attachment for making the joycons into a single-hand held controller A LOT MORE. This is actually a very cheap and easy solution to assist those who have lost the use/dexterity of one of their hands. If you can work with the design to make it getting angling for your fingers so you can actuate both joysticks and press all the buttons and do various combos, this helps those who want to play games that are locked out because of the need to have a distance between the controllers or simply the natural layout of standard controllers.
The switch lock only works for when the joycons are in, i haven't tried it but i noticed that could be an easy way to get it out, but its still a neat idea.
I find the steering wheel funny because everyone I know had one for their Wii, used it once or twice, and then threw it in the garbage(or in a box to be thrown in the garbage years later). It really doesn't add anything to motion controls.
That cup holder for the joycons seemed weird at first but then I started thinking about it. You wouldn’t be able to use motion controls but at least you wouldn’t have to put down your beer lmao
The first one just take off the controllers and slip it out 😐, if you extend the edges on the sides and down blocking them from coming off then it might work
The first one isn't that "safe" since you can still detach the joy-cons and just barely plug the switch into a tv or monitor. (Edited for correcting some weird grammar)
I always loved 3d printing and the cartridge holder is very nice, but the link brings me to the headphone box. It doesn't matter, because I don't have a 3d printer, but it would be nice to see how exactly the thing looks like
If we get a skyward sword port/HD remaster on the switch with motion controls, I’m going to CAD a master sword and hylian shield switch controller to use for them joycons 🤪
All the designs look great and i love them but the only ones that get me are the game controllers because they don't seem the ones with small hands will be able to reach them if u know what i mean but other than that everything is great and i love how much time and work u did 4 this one video. Can there be themed holders and controllers for switch like mario game controllers and game holders thx
From Most to Least Likely I would use: Switch Case Switch Display Stand Switch Grip Cartridge Holder Headphone Case One Handed JoyCon Clip JoyCon Cup Holder JoyCon Wheel Clip JoyCon N64 Clip Switch Lockbox
I would love to make my own Switch accessories, but I don't know the exact dimensions of the Switch dock, the games, or the Switch itself. How did you figure out the exact sizes?
0:56
Cousin: walks into my room to steal my switch
3D printed dock:
H A L T
*plz don’t kill me I swear I will finish my Spanish lessons*
I’ll never mess with cousin duolingo again
@@iwatchedtoomanythatonenagi5470 spanish or vanish
Him comes back home with Hand held pocket torch you dare challenge me mortal
The cup holder is good until you rage and get sprite everywhere
Then your mum will rage
No I think it's to heavy
Use a straw with the soda on the cupholder
5 09
Wow you (or however made it ) can make an actually good stand for the switch
SOOOOOOO TRUUUEEEEE !!!!!!!!!!!!!!!!!
4:00
I think you're supposed to put the strap on the controller so its more comfortable and fits
That's what the file for the print tells you to do at least
I think he just turned a right Joy Con into a N64 controller.
Nintendo: *Doesn't fix kickstand
Fans: "Fine, I'll do it myself"
Lol
Logan O'Connell26 everyone knows that
Logan O'Connell26 I didn’t know that
@Logan O'Connell26 what is that song and + it my birthday tomorrow
I......LIKE IIIIIIIIIIIIIITTTTT!!!!!!!!!!!!😍😍😍😍😍😍😍🥰🥰🥰🥰🥰🥰🥰
3:30 this is actually very smart thinking. You can look at the soda can whilst playing a game.
Ik you can crave it and notice you cant grab it while suffering while you play mario
Thw Wii Wheel and N64 Controller mods were especially amazing!
The Cuptroller, not so much, to risky to spill directly onto your joycon.
Me: Finishes game 100% and worked hard for it
Mom: Your little cousins are coming over
Me: 0:47
At least your mom warns you when they come.
@@Purp1e_Grapes What a great mom
A big tip for cartridge holder is to print it vertically on its side (ie "tallways") 👍 (source: I designed the thing to be printed this way because I hate supports 😜, and most medium sized printers should be able to handle ~130mm height)
The car controller looks really uncomfortable
I Think It Looks Comfortble.
I’m just happy to see a steering wheel
You guys do know Nintendo made an official steering wheel grip right?
he looks like he has a hard time trying to reach the shoulder buttons
Me: Okay my homework was already done! So can I play Nintendo Switch now, mom?
Mom: Sure why not...
Me finally reach the console : 0:56
8:24 Oh hell no, unless you have a glass protector, that is guaranteed to ruin your switch’s screen
I agree
Of course. I don't know why he did that, the platic will be really bad for the switch
I prefer a zipper case than that thing.
It has space to add a felt lining.
1st. Print: Wow some one is stealing your entire switch + dockingstation now. 😂👍
EXACTLY!!!!
But he can glue the station to the table..
@@firz76 Who wants to glue a console to the table? 😂
Maybe just a lock for kids or some shit
@@jeffystreet If you want to steal it you don't care. Either u can use a sissors or easily cut the cables with a knife.
The kickstand is the only potentially useful print I see. I appreciate the rest because they may spur additional designs that are actually functional.
A Nintendo switch, gopro and 3D Printer should come in a single kit
TheOddGarlic if only
And filament
@TheOddGarlic May I ask why
They really should
@White crewmate lol way more than that
the printing footage is amazing. good job, dude
I need that green kick stand...need to find someone with a 3D printer now
If you're in the UK then send me a message! I can print and post 👌🏽
Life hack: if you lick the game cartridge for your switch game and dry it off the game will detect that you did and you will have access to do anything (fly, spawn weapons, walk through walls, etc.)
beast modes smith your right it worked perfectly as you said
im wooshed
What? Like...... Nani?
So I'll be flying in Pokemon sword holding a gun?
No
Thanks! Now I can 3d print objects for my switch, I ordered one of your featured printers! It’s awesome.
Lets go in order
1. Locking case: Stupid, really, really stupid
2. Blue steering wheel: Pretty cool
3. Game holder: Useful
& I want one
4. Joy-con/Drink holder: pretty stupid and an accident waiting to happen
5. N 64 controller: I like it but I wish it was easier to use the L/R buttons
6. Green adjustable switch holder: useful, I want one for my bathroom
7. Purple switch holder/controller grip: I want one, small joy-cons suck
8. red & white case: neat but not really a switch accessory
9. Red/Blue switch & game case: really cool, useful for traveling
10. one-handed joy-con holder: Stupid and looks uncomfortable
Thank you for coming to my ted talk.
Imagine having only one hand. For those people that thing is awesome. So I like that. Of course if you have 2 hands it is uncomfortable
@@ViiperDesigns98 Lets go in order on the assumption that you only have 1 hand then
1. Number of hands doesn't matter
2. Impossible to reach other side of controller while holding wheel
3. Number of hands doesn't matter
4. Impossible to reach other side of controller thanks to large cup and still likely to spill drink
5. Still wish L/R was easier to reach and less hands make it harder to use since 3 handles now get in the way
6. Number of hands doesn't matter
7. Gives better grip and more stability, useful even with less hands
8. Number of hands doesn't matter
9. Number of hands doesn't matter
10. Useful for 1 hand, still looks uncomfortable
2 out of 10 help if you have 1 hand and 1 of those helps regardless of hands. Your point if stupid and this was a waste of my time on an 8 month old comment.
Thank you for coming back to my ted talk. Please leave all complaint with my 3 handed assistant.
9:30 I Like this because if someone only has one arm, or maybe doesn't have fingers or trouble with an arm in general, they can still play Mario kart in this cool way
That’s the same way I like it as well
So people with disabilities can use that to play their switch
YOU JUST POSTED EPID COOLNESS YOU GAINED SUBSCRIBERS
Number 1: Nintendo Switch blade
You should really market and put out the attachment for making the joycons into a single-hand held controller A LOT MORE. This is actually a very cheap and easy solution to assist those who have lost the use/dexterity of one of their hands. If you can work with the design to make it getting angling for your fingers so you can actuate both joysticks and press all the buttons and do various combos, this helps those who want to play games that are locked out because of the need to have a distance between the controllers or simply the natural layout of standard controllers.
KA3DP never fails me
This legend actually liked everything
Amazing! Will definitely have to invest in some of these!
3:19 The Best invention of the Humanity xD
Looks impractical to me.
@Jonah Peterson I guess? But none of my cousins play minecraft to my knowledge.
The switch lock only works for when the joycons are in, i haven't tried it but i noticed that could be an easy way to get it out, but its still a neat idea.
I find the steering wheel funny because everyone I know had one for their Wii, used it once or twice, and then threw it in the garbage(or in a box to be thrown in the garbage years later). It really doesn't add anything to motion controls.
9:21 this tricks is only for the professionnel we are okay
@@moonriley6379 like there isn't single joycon functionality
@@moonriley6379 yes it is to one hand person
@@soren9810 Can't really use it with one hand though
@@soren9810 it's not that good though as you've lost alot of functions like either home button or screenshot :/
Dude this stuff u made is awesome y hasn’t Nintendo hired u yet
The weird thing is, I don't have a 3D Printer or a Switch, why am I watching this??!!
I only had a Switch when I first watched it, I just got a 3D printer so I'm watching it again but I think mine's too small to make them
For the same reason I do.
I don't know, but it's satisfying
For KNOWLEDGE
The orange lockup thing can just slide out switch if you take the controllers off
is this infill patern makes it stronger or fast printable?
None of them, It Is just Better to Watch, the stronghest infill pattern Is hexagones until 30% and linear over 30%
If you Need strong parts, i recommend you to incresse the walls Number, not the infill
Neither, it makes it pretty
Yes
I NEED to know what satisfying infill that is!
*Nintendo should hire this man*
This intro music made me a subscriber. 👍🏽
I think the joy-con holder around 4mins is supposed to have that wrist strap that comes with the Switch, that has the L/R buttons on the top
friend:i get the good joy con and you get the right one
kickass:brings out the nintendo 64 3d controler
friend:FUC-
The 2 cases were awesome wish I had a 3d printer to make them
Dont we all? They are awesome!
I got a 3d printer, I don't got a switch tho
That cup holder for the joycons seemed weird at first but then I started thinking about it. You wouldn’t be able to use motion controls but at least you wouldn’t have to put down your beer lmao
Cool!!!
3:18 Try to put a bottom there we put the can to make a glass directly
That's a nice idea 💡 😀
Are you trying to say pour the pop where the can goes? So that it gets all sticky?
i'm 3d printing the adjustable stand. ill let you know how it turns out.. in 3 hours..
How die it turn out
@@LetsDrawDragons I think it didn't work cause my printer is bad
DinoTheWeird what printer do you have
@@LetsDrawDragons I don't remember, either way I stuffed it in my closet cause it kind of broke
Hey its been more than three hours. Its been 7 months
Don’t steel my switch but you can have the controllers
Who cares that I spelled that wrong, English is not my native language.
Oh my bad. I am sorry
Hahaahah lol
Take the controllers off then slide the screen out
Fair fair
That infill is cool
9:13 that looks like the most uncomfortable thing since ever
It's designed for people who can't use both hands.
@@Pepperham04 Still looks extremely uncomfortable, it probably could have been designed better
😂
7:24 Why don't you make one for joycons?
He did
gee I really want to try that but I don't even have a Nintendo Switch
These are awesome I need everyone of them
The first one just take off the controllers and slip it out 😐, if you extend the edges on the sides and down blocking them from coming off then it might work
would be so nice if there was like an 3d printed addition that turns the shoulder buttons of a joycon into switch lite shoulder buttons
Use a straw if your soda is spilling on your joy con’s and don’t tilt your controller other than that this is a great print
Wish u posted what filament you used.. mainly for the blue and red
Nintendo should you have those objects
What would you ever need to make your controllers look like the corner on the wall. To me it probably won’t feel good holding it
imagine you lose one hand
agenttank probably so
Agenttank is right, it's an accessability controller
9:04 I think this idea is very good for people who only have one hand
how were the lapses created?? they look so cool!
Octolapse probably
Octolapse
So beautiful
This is basically asmr
The cup holder one is begging to spill something on your joy cons
Agreed, it's one of the stupidest things I've ever seen printed
The first one isn't that "safe" since you can still detach the joy-cons and just barely plug the switch into a tv or monitor.
(Edited for correcting some weird grammar)
You could also just pick up the entire thing
@@foresthillwolf7998 Yeah
I love 3d prints
The first print you can still get the switch out you just have to take off the joycons
6:22 i need that for mah sploon salmon run
*sees the joycon drink holder*
Tighten your belts!
Ever thought about the gamecube style single joy-con grip being desined for use with a joy con handstrap thing with the actual strap detached?
Okay I have the ideas. Now I need a Nintendo Switch... and a 3D Printer
I always loved 3d printing and the cartridge holder is very nice, but the link brings me to the headphone box. It doesn't matter, because I don't have a 3d printer, but it would be nice to see how exactly the thing looks like
The, um, lock wouldn’t work. They could detach the joycons and slide the switch out
my mans really liking mario kart
If we get a skyward sword port/HD remaster on the switch with motion controls, I’m going to CAD a master sword and hylian shield switch controller to use for them joycons 🤪
Happy meal toys in the making
I love all that, a have a swith and a 3d print, how can i get the file of the case you do, i'm from Cuba and i dont can a get this 😔, plis help me
Interesting infill you’ve got there
Another idea is a accessory which you can attach to the car so that you can play with it comfortably
There’s already something like that on Amazon
Good luck hitting the SL/SR buttons when using the n64 print...
THE N64 3d print is INSANE
Love your contents!
I’m getting a 3D printer for Christmas. I don’t have a Switch, but my sister’s boyfriend does, so I’m thinking about making the drink holder for him.
The lock does not secure the joycons and so you can slide off the joycons and take the tablet body too.
cup holder works until you try mario kart with motion controls or BoTW with a motion puzzle
All the designs look great and i love them but the only ones that get me are the game controllers because they don't seem the ones with small hands will be able to reach them if u know what i mean but other than that everything is great and i love how much time and work u did 4 this one video.
Can there be themed holders and controllers for switch like mario game controllers and game holders thx
The N64 grip looks like it was designed to be used with the wrist strap attachments
From Most to Least Likely I would use:
Switch Case
Switch Display Stand
Switch Grip
Cartridge Holder
Headphone Case
One Handed JoyCon Clip
JoyCon Cup Holder
JoyCon Wheel Clip
JoyCon N64 Clip
Switch Lockbox
That first one.. Wouldn't taking the joy cons invalidate it?
This could save you a ton of money.
Great for mario kart or other racing games one of ur 3d prints
I think that most of these cost more in time and filament then just going out and buying something already made for that purpose.
Nice color I got the same one
0:57 my 9 year old said "NO, DAD!"
Wouldn't the 3d printed cartridge holder scratch up the cartridge?
5:14 do this but make a small thing at the bottom so you can charge and play
I wonder if any of these can be used for the new OLED model.
Modern problems require modern solutions
9:14 is when you wanna make a house out of consoles
That guy can steal it with lock and if you attach it to a heavy table, they can lockpick or if they cant they can steal your expensive joycons
jesus how much damn mario kart do you play
I would love to make my own Switch accessories, but I don't know the exact dimensions of the Switch dock, the games, or the Switch itself. How did you figure out the exact sizes?